APPLIED [Q] Re: [SRU][Q/P][PATCH v2 0/3] UBUNTU: SAUCE: Do not instantiate SPD5118 sensors on i801 SMBus controllers

Timo Aaltonen tjaalton at ubuntu.com
Wed Sep 10 11:45:40 UTC 2025


Alice C. Munduruca kirjoitti 3.9.2025 klo 22.04:
> BugLink: https://bugs.launchpad.net/bugs/2114963
> 
> v2 -> Removed Noble series from patchset due to regression potential.
> 
> [ Impact ]
> 
> The spd5118 sensor will not function normally if Intel's SMBus has the SPD Write Disable bit set. Notably, during a resume, the following messages would appear because driver is not able to sync back the cached register values:
> 
>      [1300273.242285] spd5118 2-0050: Failed to write b = 0: -6
>      [1300273.242297] spd5118 2-0050: PM: dpm_run_callback(): spd5118_resume [spd5118] returns -6
>      [1300273.242309] spd5118 2-0050: PM: failed to resume async: error -6
> 
> This commit has been sent to the upstream mailing list, but seems to have stalled there. [1]
> 
> [ Fix ]
> 
> Questing: Backported from [2]
> Plucky: Cherry pick upstream version of 1st patch in PR [3]
>          and backport from [2]
> 
> No changes were made to the original patch's code itself. Surrounding context had changed
> between the original tree and the mainline ones, and so the lines of the commit were
> manually moved into their original locations or as close as was possible.
> 
> [ Tests ]
> 
> 1. Install and boot the kernel. Check dmesg. The following message should not appear:
> 
>      [ 2.819557] spd5118 2-0050: DDR5 temperature sensor: vendor 0x06:0x32 revision 1.6
> 
> 2. Suspend the system and resume. The error messages should not appear.
> 
> The test above has been passed on each of the backports. (Also boot tested in a VM environment)
> 
> [ Where the problem could occur ]
> 
> This makes the spd5118 device not instantiate at all during the i801 controller probe.
> This was however what the driver author recommended, so let's do it this way before a better
> solution appears.
> 
> Changes are local and minor, and so at worst smbus might remain buggy or flaky on certain systems.
> 
> [Additional Information]
> 
> [1] https://lore.kernel.org/all/20250613-for-upstream-not-instantiate-spd5118-v2-1-cf456ed9b587@canonical.com/
> [2] https://kernel.ubuntu.com/forgejo/kernel/noble-linux-oem/commit/cbb6c74a6507331f0bfd03b33fb763a1005b29ac
> [3] https://kernel.ubuntu.com/forgejo/kernel/noble-linux-oem/pulls/226
> 
> Yo-Jung (Leo) Lin (2):
>    i2c: smbus: introduce Write Disable-aware SPD instantiating functions
>    UBUNTU: SAUCE: i2c: i801: Do not instantiate spd5118 under SPD Write
>      Disable
> 
>   drivers/i2c/busses/i2c-i801.c  | 28 +++++++++++++++++++++++-----
>   drivers/i2c/busses/i2c-piix4.c |  2 +-
>   drivers/i2c/i2c-smbus.c        | 21 +++++++++++++++++++--
>   include/linux/i2c-smbus.h      |  6 ++++--
>   4 files changed, 47 insertions(+), 10 deletions(-)
> 

applied to questing for -4.4, forgot to reply
-- 
t




More information about the kernel-team mailing list