[Bug 107657] Kopete + bt848 : Can't select a video standard

[krop]

Public bug reported:

Binary package hint: kopete

Distro : Kubuntu 7.04 - 2.6.20-15-generic
Kopete 0.12.4
---
Hello,

While trying to configure Kopete to use my bt848 card as a webcam, I can't select any standard. On the webcam configuration tab, the Hauppauge bt848 is selected, so is the Composite1 input, but I can't choose between PAL/SECAM/NTSC.
The menu is just filled with "none" values.

Screenshot : http://img216.imageshack.us/img216/8682/ksnapshotjt4.jpg
dmesg output : 
[   37.521462] bttv: driver version 0.9.16 loaded
[   37.521467] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   37.521508] bttv: Bt8xx card found (0).
[   37.521789] bttv0: Bt848 (rev 18) at 0000:02:08.0, irq: 20, latency: 32, mmio: 0xfdeff000
[   37.521796] bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
[   37.521823] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
[   37.551440] bttv0: detected by eeprom: Hauppauge (bt848) [card=2]
[   37.641321] bttv0: Hauppauge eeprom indicates model#60116
[   37.641322] bttv0: using tuner=3
[   37.641361] bttv0: i2c: checking for MSP34xx @ 0x80... found
[   37.724643] msp3400 2-0040: MSP3410D-B4 found @ 0x80 (bt848 #0 [sw])
[   37.729961] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[   37.730651] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   37.753468] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[   37.766238] tuner 2-0061: chip found @ 0xc2 (bt848 #0 [sw])
[   37.775953] bttv0: registered device video0
[   37.775974] bttv0: registered device vbi0

Thank you :)

** Affects: kdenetwork (Ubuntu)
     Importance: Undecided
         Status: Unconfirmed

** Affects: kopete (Ubuntu)
     Importance: Undecided
         Status: Unconfirmed

-- 
Kopete + bt848 : Can't select a video standard
https://bugs.launchpad.net/bugs/107657
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kdenetwork in ubuntu.