[Bug 432756] Re: krandrtray can't rotate screen

[Michael Kiefer]

I have a Nvidia card and the symptoms are the same als in the original post.
My output of krandrtray is the following. Note that in unsuccessful attempts the changes are immideately reverted


This comes when starting:

display-randr(1869)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "randr" not found
display-randr(1869) RandRDisplay::RandRDisplay: Using XRANDR extension 1.2 or greater.
display-randr(1869) RandRDisplay::RandRDisplay: XRANDR error base:  176
display-randr(1869) RandRScreen::loadSettings: Creating CRTC object for XID 0 ("None")
display-randr(1869) RandRScreen::loadSettings: Creating CRTC object for XID 356
display-randr(1869) RandRCrtc::loadSettings: Querying information about CRTC 356
display-randr(1869) RandRScreen::loadSettings: Creating output object for XID 357
display-randr(1869) RandROutput::queryOutputInfo: XID 357 is output "default" (connected)
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output "default"
display-randr(1869) RandROutput::queryOutputInfo: Possible CRTCs for output "default" :
display-randr(1869) RandROutput::queryOutputInfo:    - CRTC 356
display-randr(1869) RandROutput::queryOutputInfo: Current configuration for output "default" :
display-randr(1869) RandROutput::queryOutputInfo:    - Refresh rate: 50
display-randr(1869) RandROutput::queryOutputInfo:    - Rect: QRect(0,0 1600x1200)
display-randr(1869) RandROutput::queryOutputInfo:    - Rotation: 1
display-randr(1869)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "nvidiadisplay" not found
display-randr(1869)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "nvidia3d" not found
display-randr(1869)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "kgamma" not found
display-randr(1869)/kdecore (services) KServiceFactory::findServiceByDesktopPath: "energy" not found
display-randr(1869) KRandRModule::load: Loading KRandRModule...
display-randr(1869) OutputConfig::load: Loading output configuration for "default"
display-randr(1869) RandRConfig::load: Output rect: QRect(0,0 1600x1200)
display-randr(1869) KRandRModule::load: Loading KRandRModule...
display-randr(1869) OutputConfig::load: Loading output configuration for "default"
display-randr(1869) RandRConfig::load: Output rect: QRect(0,0 1600x1200)
display-randr(1869) KRandRModule::load: Loading KRandRModule...
display-randr(1869) OutputConfig::load: Loading output configuration for "default"
display-randr(1869) RandRConfig::load: Output rect: QRect(0,0 1600x1200)


Rotating upside-down (successfully):

display-randr(1869) RandRConfig::apply: Applying settings...
display-randr(1869) RandRConfig::apply: Normalizing positions by QPoint(0,0)
display-randr(1869) RandRConfig::apply: Output config for "default" :
  rect = QRect(0,0 1600x1200) , rot = 4 , rate = 50
display-randr(1869) RandROutput::setCrtc: Setting CRTC 0 (disabled) on output "default"
display-randr(1869) RandROutput::slotEnable: Attempting to enable "default"
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output "default"
display-randr(1869) RandRScreen::applyProposed: Applying proposed changes for screen 0 ...
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed:        Current Screen rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Proposed rotation: 4
display-randr(1869) RandRCrtc::applyProposed:        Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed:        Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed:           - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. ( mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Changed output "default" to CRTC 356
display-randr(1869) RandROutput::tryCrtc:    ( from old CRTC 356 )
display-randr(1869) RandRScreen::applyProposed: Changes have been applied to all outputs.
display-randr(1869) RandRCrtc::handleEvent: [CRTC] Event...
display-randr(1869) RandRCrtc::handleEvent:    Changed rotation:  4


Cancelling changes:

display-randr(1869) RandRScreen::applyProposed: Changes canceled, reverting to original setup.
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed:        Current Screen rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current rotation: 4
display-randr(1869) RandRCrtc::applyProposed:        Proposed CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Proposed rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed:        Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed:           - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. ( mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Changed output "default" to CRTC 356
display-randr(1869) RandROutput::tryCrtc:    ( from old CRTC 356 )
display-randr(1869) RandRCrtc::handleEvent: [CRTC] Event...
display-randr(1869) RandRCrtc::handleEvent:    Changed rotation:  1


Rotating right (without success):

display-randr(1869) RandRConfig::apply: Applying settings...
display-randr(1869) RandRConfig::apply: Normalizing positions by QPoint(0,0)
display-randr(1869) RandRConfig::apply: Output config for "default" :
  rect = QRect(0,0 1600x1200) , rot = 8 , rate = 50
display-randr(1869) RandROutput::setCrtc: Setting CRTC 0 (disabled) on output "default"
display-randr(1869) RandROutput::slotEnable: Attempting to enable "default"
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output "default"
display-randr(1869) RandRScreen::applyProposed: Applying proposed changes for screen 0 ...
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed:        Current Screen rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Proposed rotation: 8
display-randr(1869) RandRCrtc::applyProposed:        Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed:        Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed:           - "default"
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed:        Current Screen rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Proposed rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed:        Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed:           - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. ( mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Failed to change output "default" to CRTC 356
display-randr(1869) RandROutput::tryCrtc:    Switching back to old CRTC 356
display-randr(1869) RandRScreen::applyProposed: Changes have been applied to all outputs.
display-randr(1869) RandRScreen::applyProposed: Changes canceled, reverting to original setup.


Rotating left (without success):

display-randr(1869) RandRConfig::apply: Applying settings...
display-randr(1869) RandRConfig::apply: Normalizing positions by QPoint(0,0)
display-randr(1869) RandRConfig::apply: Output config for "default" :
  rect = QRect(0,0 1600x1200) , rot = 2 , rate = 50
display-randr(1869) RandROutput::setCrtc: Setting CRTC 0 (disabled) on output "default"
display-randr(1869) RandROutput::slotEnable: Attempting to enable "default"
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output "default"
display-randr(1869) RandRScreen::applyProposed: Applying proposed changes for screen 0 ...
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed:        Current Screen rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Proposed rotation: 2
display-randr(1869) RandRCrtc::applyProposed:        Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed:        Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed:           - "default"
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed:        Current Screen rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed CRTC rect: QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed:        Proposed rotation: 1
display-randr(1869) RandRCrtc::applyProposed:        Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed:        Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed:           - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. ( mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Failed to change output "default" to CRTC 356
display-randr(1869) RandROutput::tryCrtc:    Switching back to old CRTC 356
display-randr(1869) RandRScreen::applyProposed: Changes have been applied to all outputs.
display-randr(1869) RandRScreen::applyProposed: Changes canceled, reverting to original setup.


** Changed in: kdebase-workspace (Ubuntu)
       Status: Invalid => New

-- 
krandrtray can't rotate screen
https://bugs.launchpad.net/bugs/432756
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to kdebase-workspace in ubuntu.