Modem Inspiron 6400 - was Re: SysGuard to show temperature (was Kubuntu on Dell Inspiron 6400)

[Orjan Sinclair]

Francisco Borges wrote:
> » On Wed, Oct 11, 2006 at 09:54AM +0200, Orjan Sinclair wrote:
>
>   
>> Francesco, is there a way of getting the KSysguard panel applet to
>> integrate the temperature-meter?
>>     
>
> Yes, it is possible.
>
>   
>> I have tried but it only shows the 2 "predefined" no matter what I try
>> with my a bit "oldtimer coming back to *nix" knowledge.
>>     
>
> This is how you do it:
>
>
> Step 0. Add an ksysguard applet to your panel.
>
>                   ========================
>
> Step 1. Get an empty display;
>
> Go to the ksysguard applet corner (that little bar on the left of it).
> "Right click" -> "Configure SysGuard". Set the "number of displays" to
> 3.
>
> OR
>
> Right click on one display at the panel applet directly, say CPU,
> and "remove display".
>
> Either way you should have an empty display at the applet.
>
>                    =======================
>
>
> Step 2. Open KSysGuard (the program). Find the temperature sensor at the
>         sensor browser (at the left), and drag & drop it into the empty
>         display.
>
> You will then be asked how you want it displayed etc (you can change
> that later).
>
> Cheers,
>   
So simple I humbly blush once you described it - -and works perfect to ! 
Thanx!
Btw - have you tried using the modem?
Sinclair