Video settings

[Billie Walsh]

On 04/27/2008 Frederic Schaer wrote:
>  Hi,
>
>  Another very interesting file to look at is
>  /var/log/Xorg.0.log
>
>  I have an nvidia card here, that's unable to correctly display on the
>  VGA display without me telling Xorg that is had to use CRT-1 output :
>  I
>  found out thanks to that file what was the problem...
>
>  Please look for errors and warnings in that logfile...
>  Regards

The below seems to be repeated many times in the log file. The only 
warnings I saw were about only supporting "seperate sync".

(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "PTS", prod id 1902
(II) intel(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only 
handle seperate sync.
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  
1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 
769 772 800 -hsync -vsync (60.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 
605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 
603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 
484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 
491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 
486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 
492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 
414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 
769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 
771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 
771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 
628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 
604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 
643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  
1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): EDID vendor "PTS", prod id 1902
(II) intel(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only 
handle seperate sync.
(II) intel(0): Output VGA connected
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 892 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (380, 300) mm
(**) intel(0): DPI set to (85, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 2.2.0
    ABI class: X.Org Video Driver, version 2.0

-- 
Life is what happens while your busy making other plans.