[SOLVED] Re: Natty 64bit Philips Laser MFD LFF 6050 (libstdc++ missing)

[Steve Morris]

On 08/08/11 03:42, Mirto Silvio Busico wrote:
> Hurray. The printer now works. The scanner is not detected, but I'll 
> start a new thread about this.
I believe that to get the scanner to work you need to look in 
/etc/sane.d at the various .conf files and determine which one 
corresponds to your device. In those files there are comments that tell 
you what entry needs to be placed in the file to get sane to recognise 
the device. For this command you will need the device id that lsusb 
provided to you.

regards,
Steve

>
> To use the printer:
>
> 1) change the install script to link the correct library:
>
> echo Running post-install commands...
> #ln -sf /usr/lib/libstdc++.so.6.0.9 /usr/lib/libstdc++.so.5
> *ln -sf /usr/lib32/libstdc++.so.6.0.14 /usr/lib/libstdc++.so.5*
> echo Installation is complete.
>
> 2) Install the printer selecting the installed ppd file that is:
> */usr/share/ppd/openprinting/Laser_Pro_LL2.ppd*
>
> (beware the PCL ppd file doesn't work)
>
> Thanks to all
>     Mirto
>
>
> Il 07/08/2011 19:17, Alan Dacey Sr. ha scritto:
>> On Sunday, August 7, 2011 12:58:20 PM Mirto Silvio Busico wrote:
>>> Il 07/08/2011 17:37, Mirto Silvio Busico ha scritto:
>>>> Il 07/08/2011 13:33, Nils Kassube ha scritto:
>>>>> Mirto Silvio Busico wrote:
>>>>>
>>> [...snip...]
>>>
>>> First of all, Clay and Nils thanks for your time.
>>>
>>> The drivers are always the same of that on CD:
>>> Philips support page (in English the italian page have no drivers):
>>> http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?slg=en&scy=hr&ctn=LFF6050/INB
>>> Sagem support page (says it is good for ubuntu 9.10)
>>> http://support.sagemcom.com/site/modele_fax.php?page=driver&prd=MFD6050/MFD6080&pays=it
>>>
>>> The version always says:
>>> # Installation script for Laser Pro LL2 PCL version 1.0.
>>> # Produced using ESP Package Manager v4.1; report problems to
>>> epm at easysw.com.
>>> #%product Laser Pro LL2 PCL
>>> #%vendor OEM
>>> #%copyright 2008-07-23 OEM
>>> #%version 1.0 1000000
>>> #%description Laser Pro LL2 PCL
>>> #%rootsize 118
>>> #%usrsize 798
>>>
>>>
>>> So I started to investigate how the LaserProLL2PCL.install works.
>>>
>>> I've found that the last command is a link to a c++ library:
>>>
>>> ----
>>> echo Running post-install commands...
>>> ln -sf /usr/lib/libstdc++.so.6.0.9 /usr/lib/libstdc++.so.5
>>> echo Installation is complete.
>>> ----
>>>
>>> I was not able to find this library in natty. I installed the
>>> development framework (install module-assistant - issue an m-a prepare)
>>> But I didn't find any libstdc++ library
>>>
>>> I suppose that unti I find someting to link to the
>>> /usr/lib/libstdc++.so.5 name the driver cannot work.
>>>
>>> Do you know how to find this library?
>>>
>>> Thanks
>>>      Mirto
>>>
>>>
>> copy&  paste this into a terminal without the quotes:
>> 	'aptitude show libstdc++5'
>> 	(or if aptitude is not installed, 	'apt-cache showpkg libstdc++5'  )
>>
>> You can also use your favoite package manager to find it.
>> That will show you it is available from the Ubuntu universe repository.  It is then a simple matter of installing it.
>>
>> Alan
>>
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/kubuntu-users/attachments/20110808/892348cd/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: samorris.vcf
Type: text/x-vcard
Size: 126 bytes
Desc: not available
URL: <https://lists.ubuntu.com/archives/kubuntu-users/attachments/20110808/892348cd/attachment.vcf>