Colony 4 test report Dell Latitude D810

[Per Arne Nilssen]

Hi,

I have another D810 than Somlyai Tamás.

https://wiki.ubuntu.com/LaptopTestingTeam/DellLatitudeD810?highlight=%
28laptop%29%7C%28testin%29

So I will list some different specs. 
(This information have been fetched from BIOS)

Intel P4 1.86GHz
1024MB 533MHz DDR2 SDRAM
60GB HD, DVD+/- RW
Video controller = ATI x600 (M24)
Video memory = 128MB
Panel type = 15.4" wide SXGA+ (native resolution 1680 by 1050)
Audio controller = Sigmatel 9751
MiniPCI Device = Intel wireless 2200bg

I don't have modem or bluetooth installed.

Did first try the Live CD....just to check if it worked.

Test results:

Sound = Working
GDM = Working (resolution was 1680x1050, perfect!)
Touchpad = extremely slow!!
"stick" = working as it should
Some language problems, English, Norwegian, Danish!!!
Network settings = eth0 and eth1 not configured
After configuring = eth0 working, eth1 (wireless) working (also FN+F2)
Mute on/off = working, both FN + buttons and sound buttons
External USB HD = found and shortcut on desktop
External USB mouse = working w/scroll

Didn't try out more....wanted to install...

Test results after install:

Installing went perfect

Sound = working
GDM = working (resolution 1680x1050)
Touchpad = extremely slow!!
"stick" = working
Mute on/off = working, both FN + buttons and sound buttons
Network settings = working, after activating and configuring eth1
(wireless) FN + F2 was working. (I do get an error message on
boot...IPW2200: failed to send WEP_KEY command)Even if wireless is
toggled off. This is a new one.
Stand by = working, after the uncomment in /etc/default/acpi-support
USB mouse = working w/scroll
USB keyboard = working
Headphones = working
External monitor = NOT working as it should. (Boot messages on laptop
screen, GDM on external monitor. No toggling with FN + CRT/LCD, no
mirrors, no extend desktop. I only have picture on external monitor in
GDM. When shutdown picture goes back to laptop screen.)

Docking results:
AC = working
USB = working (Mouse w/scroll ok)
Serial = untested
parallel = untested
External VGA = working
External DVI = NOT working (Boot messages ok, GDM "black" screen)
Modem = untested
NIC = working
PS/2 = working
Headphones = NOT working (I want this to work!!)
TV out = untested
S/PDIF = untested


Some other results:

Hibernating = working (Not FN + F1 button)


Per Arne Nilssen
systemansvarlig at vagaungdomsskule.no