[ubuntu/lucid] linux-ti-omap 2.6.33-500.4 (Accepted)

Wed Mar 31 22:30:32 BST 2010

linux-ti-omap (2.6.33-500.4) lucid; urgency=low

  [ Amit Kucheria ]

  * [Config] Compile-in display subsystem
  * Merge the DSS2 stack from 2.6.34-rc2 mainline tree
  * SAUCE: Upgrade aufs2 to latest version for 2.6.33
    - LP: #548924
  * [Config] Update configuration for new aufs2
  * [Config] Fix d-i modules
  * [Config] USB_STORAGE and ATA drivers can be a modules
  * [Upstream] DSS2 support for Beagleboard
  * [Config] Configure DSS2 based on beagle defconfig
  * [Config] Enable USB OTG mode
  * [Config] Enable various ethernet drivers

  [ Imre Deak ]

  * SAUCE: ARM: VFP: add support to sync the VFP state of the current
    thread
    - LP: #507503
  * SAUCE: ARM: VFP: preserve the HW context when calling signal handlers
    - LP: #507503

  [ Upstream Kernel Changes ]

  * OMAP: DSS2: Add Sharp LQ043T1DG01 panel driver
  * OMAP: DSS2: add Toppoly TDO35S panel
  * OMAP: DSS: add TPO TD043MTEA1 panel
  * OMAP: DSS2: Improve Kconfig help texts
  * OMAP: DSS2: enable VDDS_DSI when using DPI
  * OMAP: 3430SDP: remove vdvi regulator
  * OMAP: DSS: Taal: fix error returns in taal_probe()
  * OMAP: DSS2: OMAPFB: implement OMAPFB_GET_DISPLAY_INFO
  * OMAP: DSS2: fix irq-stats compilation
  * OMAP: DSS2: OMAPFB: Add omapfb_update_window prototype
  * OMAP: DSS2: improve DSS clk src selection
  * OMAP: DSS2: DSI: add dsi_bus_is_locked()
  * OMAP: DSS2: DSI: add helpers for DCS read/write
  * OMAP: DSS2: DSI: export dsi_vc_enable_hs()
  * OMAP: DSS2: DSI: configure all DSI VCs
  * OMAP: DSS2: DSI: remove dsi_vc_print_status()
  * OMAP: DSS2: Check ctx loss count only when starting the first clock
  * OMAP: DSS2: remove sub-panel system
  * OMAP: DSS2: fix driver probe error handling
  * OMAP: DSS2: OMAPFB: fix dssdev cleanup on error
  * OMAP: DSS2: OMAPFB: fix cleanup on dssdev enable error
  * OMAP: DSS2: fix get_dsi/dispc_clk_source() usage
  * OMAP: DSS2: DSI: change DSI bus_lock to semaphore
  * OMAP: DSS2: DSI: remove auto-update perf measurement
  * OMAP: DSS2: move run_test()
  * OMAP: DSS2: move memory_read()
  * OMAP: DSS2: move set/get_mirror()
  * OMAP: DSS2: move get/set_rotate()
  * OMAP: DSS2: move wait_vsync()
  * OMAP: DSS2: move enable/disable_channel to overlay manager
  * OMAP: DSS2: move get_resolution()
  * OMAP: DSS2: move get_recommended_bpp()
  * OMAP: DSS2: move enable/get_te()
  * OMAP: DSS2: move set/get_update_mode()
  * OMAP: DSS2: move update() and sync()
  * OMAP: DSS2: move enable/disable/suspend/resume
  * OMAP: DSS2: move set/get_wss()
  * OMAP: DSS2: move timing functions
  * OMAP: DSS2: DSI: remove external TE support
  * OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE
  * OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper
  * OMAP: DSS2: TPO-TD03MTEA1: fix function names
  * OMAP: DSS2: DSI: add error prints
  * OMAP: DSS2: OMAPFB: Constify some function parameters
  * OMAP: DSS2: Taal: Fix ESD check
  * OMAP: DSS2: Taal: Fix TE when resuming
  * OMAP: DSS2: VRAM: Fix early_param for vram
  * OMAP: DSS2: initialize dss clk sources properly
  * OMAP: DSS2: panel-generic: re-implement mode changing

Date: Wed, 31 Mar 2010 21:50:49 +0100
Changed-By: Andy Whitcroft <apw at canonical.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
https://launchpad.net/ubuntu/lucid/+source/linux-ti-omap/2.6.33-500.4
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Wed, 31 Mar 2010 21:50:49 +0100
Source: linux-ti-omap
Binary: linux-headers-2.6.33-500 linux-image-2.6.33-500-omap linux-headers-2.6.33-500-omap linux-image-2.6.33-500-omap-dbgsym
Architecture: source
Version: 2.6.33-500.4
Distribution: lucid
Urgency: low
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Andy Whitcroft <apw at canonical.com>
Description: 
 linux-headers-2.6.33-500 - Header files related to linux-ti-omap kernel version 2.6.33
 linux-headers-2.6.33-500-omap - Linux kernel headers for version 2.6.33 on OMAP3-based systems
 linux-image-2.6.33-500-omap - Linux kernel image for version 2.6.33 on OMAP3-based systems
 linux-image-2.6.33-500-omap-dbgsym - Linux kernel debug image for version 2.6.33 on OMAP3-based system
Changes: 
 linux-ti-omap (2.6.33-500.4) lucid; urgency=low
 .
   [ Amit Kucheria ]
 .
   * [Config] Compile-in display subsystem
   * Merge the DSS2 stack from 2.6.34-rc2 mainline tree
   * SAUCE: Upgrade aufs2 to latest version for 2.6.33
     - LP: #548924
   * [Config] Update configuration for new aufs2
   * [Config] Fix d-i modules
   * [Config] USB_STORAGE and ATA drivers can be a modules
   * [Upstream] DSS2 support for Beagleboard
   * [Config] Configure DSS2 based on beagle defconfig
   * [Config] Enable USB OTG mode
   * [Config] Enable various ethernet drivers
 .
   [ Imre Deak ]
 .
   * SAUCE: ARM: VFP: add support to sync the VFP state of the current
     thread
     - LP: #507503
   * SAUCE: ARM: VFP: preserve the HW context when calling signal handlers
     - LP: #507503
 .
   [ Upstream Kernel Changes ]
 .
   * OMAP: DSS2: Add Sharp LQ043T1DG01 panel driver
   * OMAP: DSS2: add Toppoly TDO35S panel
   * OMAP: DSS: add TPO TD043MTEA1 panel
   * OMAP: DSS2: Improve Kconfig help texts
   * OMAP: DSS2: enable VDDS_DSI when using DPI
   * OMAP: 3430SDP: remove vdvi regulator
   * OMAP: DSS: Taal: fix error returns in taal_probe()
   * OMAP: DSS2: OMAPFB: implement OMAPFB_GET_DISPLAY_INFO
   * OMAP: DSS2: fix irq-stats compilation
   * OMAP: DSS2: OMAPFB: Add omapfb_update_window prototype
   * OMAP: DSS2: improve DSS clk src selection
   * OMAP: DSS2: DSI: add dsi_bus_is_locked()
   * OMAP: DSS2: DSI: add helpers for DCS read/write
   * OMAP: DSS2: DSI: export dsi_vc_enable_hs()
   * OMAP: DSS2: DSI: configure all DSI VCs
   * OMAP: DSS2: DSI: remove dsi_vc_print_status()
   * OMAP: DSS2: Check ctx loss count only when starting the first clock
   * OMAP: DSS2: remove sub-panel system
   * OMAP: DSS2: fix driver probe error handling
   * OMAP: DSS2: OMAPFB: fix dssdev cleanup on error
   * OMAP: DSS2: OMAPFB: fix cleanup on dssdev enable error
   * OMAP: DSS2: fix get_dsi/dispc_clk_source() usage
   * OMAP: DSS2: DSI: change DSI bus_lock to semaphore
   * OMAP: DSS2: DSI: remove auto-update perf measurement
   * OMAP: DSS2: move run_test()
   * OMAP: DSS2: move memory_read()
   * OMAP: DSS2: move set/get_mirror()
   * OMAP: DSS2: move get/set_rotate()
   * OMAP: DSS2: move wait_vsync()
   * OMAP: DSS2: move enable/disable_channel to overlay manager
   * OMAP: DSS2: move get_resolution()
   * OMAP: DSS2: move get_recommended_bpp()
   * OMAP: DSS2: move enable/get_te()
   * OMAP: DSS2: move set/get_update_mode()
   * OMAP: DSS2: move update() and sync()
   * OMAP: DSS2: move enable/disable/suspend/resume
   * OMAP: DSS2: move set/get_wss()
   * OMAP: DSS2: move timing functions
   * OMAP: DSS2: DSI: remove external TE support
   * OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE
   * OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper
   * OMAP: DSS2: TPO-TD03MTEA1: fix function names
   * OMAP: DSS2: DSI: add error prints
   * OMAP: DSS2: OMAPFB: Constify some function parameters
   * OMAP: DSS2: Taal: Fix ESD check
   * OMAP: DSS2: Taal: Fix TE when resuming
   * OMAP: DSS2: VRAM: Fix early_param for vram
   * OMAP: DSS2: initialize dss clk sources properly
   * OMAP: DSS2: panel-generic: re-implement mode changing
Checksums-Sha1: 
 060782aaa67222c4b2303e4666f46622d0a46f0f 1136 linux-ti-omap_2.6.33-500.4.dsc
 82a53b44aa318c55b32f3dfcd7354ac1fe2a5b04 87906068 linux-ti-omap_2.6.33-500.4.tar.gz
Checksums-Sha256: 
 a52e8169d52ca69b994271087467751d0098e6db4ec11f0e00f78e4ec98f5b30 1136 linux-ti-omap_2.6.33-500.4.dsc
 34a97785195b5aed811dad98b8fb9977f27b4e7fbce42b446ecfeac56eb44f0e 87906068 linux-ti-omap_2.6.33-500.4.tar.gz
Files: 
 1fa392d03d23f9835fda79647428a5a5 1136 devel optional linux-ti-omap_2.6.33-500.4.dsc
 0b31b269e407d4ebb1120a5fd49023c4 87906068 devel optional linux-ti-omap_2.6.33-500.4.tar.gz
Launchpad-Bugs-Fixed: 507503 507503 548924

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAkuzvaYACgkQ7kQoFRG3d68p4QCgwSy02BmNzJlVvcxV4Y2udAR9
EWMAoIsOBRdBsej0rI3on92z2kf4ymOs
=7C+A
-----END PGP SIGNATURE-----