MAAS Deployment KO with bonding

[Thawngzapum Lian]

Hi Flint,

Looked like none of the NICs of those servers were connected to PXE vlan.
Shouldn't that be the very requirement in the first place?

Regards,
L

On Mon, Aug 21, 2017 at 2:47 PM, Mike Pontillo <mike.pontillo at canonical.com>
wrote:

> On Mon, Aug 21, 2017 at 7:42 AM, Flint WALRUS <gael.therond at gmail.com>
>  wrote:
>
>> Unfortunately, I'm unable to complete the deploy process because once the
>> server is install and boot bonds interfaces are created but it hang out
>> with the error: *a start job is running for raise network interfaces.*
>>
>> Once the 5 mins countdown finish the cloud-init script fail with the
>> following error message: *Didn't find any datasource,
>> DataSourceNotFoundException.*
>>
>> At this point I'm unable to know if this error is caused by the network
>> issue or if the network issue is caused by the node not able to contact the
>> MAAS Metadata.
>>
>
> What version of MAAS do you have installed? (See "apt-cache policy maas"
> and "apt-cache policy curtin".) Which Ubuntu image are you trying to deploy?
>
> I've seen this kind of issue occur if the bond cannot be fully brought
> online for some reason, such as one of the links is down. So I would
> double-check that (and check the MAC addresses of each interface in the
> bond to ensure the interface names match what you expect).
>
> To narrow down the issue, I would browse to the machine in the MAAS UI and
> click on "00-maas-00-support-info" on the "Commissioning" tab. Search for
> "metadata_url" in the output and check if the URL is going to be reachable
> after the machine comes up with its given network configuration. For
> troubleshooting, the contents of the "Installation" tab will also help, and
> the output of "maas <session> machine get-curtin-config <system-id>" from
> the command-line.
>
> Then I would remove some of the network configuration in MAAS a little at
> a time to see which setting causes the problem. For example, it might be
> worth trying to configure the node with the 1 Gbps interface being the only
> one that is brought online when the machine is deployed. You could
> configure the bonds without any VLANs and check if it works. Then try
> configuring the bonds with the VLANs, but without any IP address
> assignment, and check if the deployment is successful.
>
> Regards,
> Mike
>
> --
> Maas-devel mailing list
> Maas-devel at lists.ubuntu.com
> Modify settings or unsubscribe at: https://lists.ubuntu.com/
> mailman/listinfo/maas-devel
>
>


-- 
Thawngzapum "Lian"
Email: tlian at salesforce.com
Phone: 317-518-1782
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/maas-devel/attachments/20170821/6e6480df/attachment.html>