[ubuntu/noble-proposed] linux-qcom 6.8.0-1060.61 (Accepted)

Andy Whitcroft apw at canonical.com
Mon Jan 26 14:56:19 UTC 2026 

linux-qcom (6.8.0-1060.61) noble; urgency=medium

  * noble/linux-qcom: 6.8.0-1060.61 -proposed tracker (LP: #2138691)

  * (kernel-space) Non-HLOS images for RUBIK Pi 3
    - arm64: dts: rubikpi3: Change ADSP firmware path

  * change the qupv3fw.elf path temporarily
    - Revert "UBUNTU: SAUCE: change the qupv3fw.elf loading path"

  * Miscellaneous Ubuntu changes
    - [Configs] enable CONFIG_REALTEK_PHY_HWMON

  * Miscellaneous upstream changes
    - ASoC: qcom: q6dsp: parse Display port tokens
    - PENDING: arm64: dts: qcom: qcs6490: Enable DP audio
    - FROMLIST: dt-bindings: bridge: lt8713sx: Add bindings
    - PENDING: arm64: dts: qcom: Add Lemans AMR Board
    - QCLINUX: arm64: dts: qcom: Add msm-id & board-id for lemans AMR
    - QCLINUX: arm64: dts: qcom: Add addons support for lemans AMR
    - PENDING: arm64: dts: qcom: lemans-amr: Enable GPI DMA channels
    - PENDING: arm64: dts: qcom: lemans-amr: Add firmware-name to QUPv3 nodes
    - PENDING: arm64: dts: qcom: bt enablement for lemans-amr
    - QCLINUX: arm64: dts: qcom: Remove unused firmware loading properties
    - PENDING: arm64: dts: qcom: lemans-amr: Add MCP2518FD CAN controllers on
      SPI7 and SPI14
    - PENDING: arm64: dts: qcom: lemans-amr: enable RS-485 mode on uart16 at
      boot
    - PENDING: arm64: dts: qcom: lemans-amr: Enable USB controllers
    - QCLINUX: arm64: dts: qcom: Enable ethernet with realtek Phy
    - PENDING: arm64: dts: qcom: lemans-amr: Add IOMMU entries for PCIe0
    - PENDING: arm64: dts: qcom: add HDMI1 and HDMI2 support for lemans AMR
    - PENDING: arm64: dts: qcom: disable HDMI2
    - PENDING: arm64: dts: qcom: disable DP on Lemans AMR
    - QCLINUX: arm64: dts: qcom: Add soundcard support for lemans AMR
    - PENDING: arm64: dts: qcom: Enable HDMI audio
    - PENDING: ASoC: qcom: q6dsp: Update formats and max rate for Secondary
      i2s
    - PENDING: arm64: dts: qcom: qcs6490: Enable HDMI audio

linux-qcom (6.8.0-1059.60) noble; urgency=medium

  * [Desktop]M.2 Interface Has a Chance of Not Recognizing the PCIe type
    devices
    - arm64: dts: rubikpi3: Adjust the power-on time of the M.2

  * Enable ICE hardware for monza EVK board
    - PENDING: arm64: dts: qcom: Enable ICE hardware for monza EVK board

  * [RB4] Enable 2.5GbE support for SGMII0 ethernet interface
    - UPSTREAM: arm64: dts: qcom: Support 2.5G on IQ8 EVK Pro SKU's Ethernet
      port
    - UPSTREAM: arm64: dts: qcom: Support 2.5G on IQ8 EVK's Ethernet port

  * [RB4]: Enable GPU devicetree support for desktop variant
    - BACKPORT: arm64: dts: qcom: qcs8275: Enable Adreno 623 GPU

  * Update the device tree based on the latest kernel - device tree and kernel
    compatibility
    - arm64: dts: rubikpi3: Update the device tree based on the latest kernel

  * [AOM-2721] Submit a PR to Canonical for adding AOM-2721's device tree into
    the linux package
    - arm64: dts: qcom: Add AOM2721-A1 base/HDMI/LVDS DTS and overlays

  * Miscellaneous Ubuntu changes
    - [Config] update CONFIG options for QLI 1.7
    - SAUCE: pci/controller: include "../pci-host-common.h"
    - SAUCE: ubuntu/qcom/camera: include <linux/of_device.h>
    - SAUCE: Revert video-driver: Remove local MIN/MAX macro definitions

  * Miscellaneous upstream changes
    - PENDING: arm64: dts: qcom: sa8255p: Add uefi log node for SA8255P
    - PENDING: net: stmmac: Remove global variable for tracking the PHY
      interface
    - QCLINUX: arm64: dts: qcom: Remove unused firmware loading properties
    - PENDING: arm64: dts: qcom: qcs615-addons: Add smcinvoke node
    - PENDING: arm64: dts: qcom: qcs615-addons: Add mem-object
    - QCLINUX: arm64: dts: qcom: qcs615-addons: Add CMA heap
    - QCLINUX: arm64: dts: qcom: qcs615-addons: Add tz-log node
    - QCLINUX: dma-heap: qcom: Support deferred zeroing for Carveout heap
    - PENDING: mailbox: qcom-ipcc: add rx_callback support, retain virq
      compatibility
    - PENDING: arm64: dts: qcom: sa7255p: Enable UFS as default
    - QCLINUX: arm64: defconfigs: Enable deferred zeroing for Auto targets
    - PENDING: usb: misc: eud: Specify initial role during probe
    - PENDING: arm64: dts: qcom: qcs9075: Enable EUD for RB8 platform
    - PENDING: arm64: dts: qcom: sa8775P: Enable eud on ride
    - PENDING: arm64: dts: qcom: Add uart6 support for QCS8275-RB4
    - FROMLIST: drm/msm/dp: split dp_ctrl_off() into stream and link parts
    - FROMLIST: drm/msm/dp: Add support for sending VCPF packets in DP
      controller
    - QCLINUX: pci: quirks: Disable L1.1 and L1.2 for USB hub attach
    - QCLINUX: soc: qcom: rproc_minidump: Fix the minidump collection
    - PENDING: soc: qcom: ice: Fix parsing issue for max and mean frequencies
    - PENDING: coresight-tpda: Add sysfs node for tpda configuration
    - QCLINUX: arm64: qcom_defconfig: Enable PCIe L1 sub states
    - PENDING: arm64: dts: qcom: Enable eud on QCS8275 IQ EVK
    - FROMLIST: media: venus: pm_helpers: use opp-table for the frequency
    - FROMLIST: arm64: dts: qcom: qcs615: add venus node to devicetree
    - FROMLIST: arm64: dts: qcom: qcs615-ride: enable venus node and set
      firmware
    - PENDING: arm64: dts: qcom: Enable eud on QCS8275 IQ8 Pro SKU
    - PENDING: arm64: dts: qcom: Enable eud on qcs8300 ride
    - PENDING: arm64: dts: qcom: Add uart6 support for QCS8275-RB4 PRO SKU
    - PENDING: i2c: qcom-geni: Add Ftrace support for GPI & I2C driver
    - BACKPORT:ufs: ufs-qcom: Disable ICE when BIST fails
    - QCLINUX: arm64: defconfig: qcom: Enable ATH12K driver
    - QCLINUX: arm64: configs: qcom_debug: Enable ATH12K debug and tracing
    - QCLINUX: ASoC: qcom: qcm6490: Add dapm routings for pinctrl widget for
      primary mi2s
    - PENDING: ASoC: qcom: q6dsp: Update bit format support for secondary i2s
      rx
    - FROMLIST: clk: qcom: gcc: Update the SDCC clock to use shared_floor_ops
    - PENDING: usb: eud: Enable HS Phy in probe if EUD is enabled before linux
      boots up
    - QCLINUX: net: pcs: Prevent unintended error message in
    - QCLINUX: ASoC: qcs9100: Add support for max codec in monza
    - PENDING: arm64: dts: qcom: qcs6490: Enable HDMI audio
    - QCLINUX: arm64: dts: qcom: qcs6490-addons: Fix pinctrl names
    - QCLINUX: arm64: dts: qcom: qcs6490-addons-rb3gen2: Update sound card
      name for qcs6490 platform
    - UPSTREAM: media: venus: vdec: queue dpb buffers to firmware for video
      seek
    - PENDING: ptp: ptp_qcom_tsc: Add support for the frame pulse generator
    - PENDING: ptp: ptp_qcom_tsc: Add dynamic drift correction support
    - PENDING: arm64: dts: qcom: lemans: add DT changes to enable MDSS1 and
      DPU
    - PENDING: arm64: dts: qcom: sa7255p: Add uefi log node for SA7255P
    - PENDING: net: stmmac: Flush packets from Rx Queues when Rx stops
    - PENDING: pinctrl: sa8775p: Add UFS1 reset support
    - FROMLIST: net: stmmac: remove _RE and _TE in (start|stop)_(tx|rx)()
      methods
    - PENDING: ptp: ptp_qcom_tsc: Add FUSA error handling support
    - PENDING: arm64: dts: qcom: qcs6490: Remove hdmi dai link
    - QCLINUX: arm64: dts: qcom: qcs6490-addons: Enable secondary mi2s
    - PENDING: pinctrl: qcom: fix qcs8300 lpass lpi ext_mclk1_d pinctrl
      setting
    - QCLINUX: iommu/arm-smmu: add runtime PM cleanup in fault handler exit
    - PENDING: drm/msm/dp: Update msm_dp_controller IDs for sa8775p
    - PENDING: arm64: dts: qcom: sa8775p: add mdss1 displayPort device nodes
    - PENDING: arm64: dts: qcom: sa8775p-ride: Enable mdss1 display Port
    - PENDING: clk: qcom: gcc-sa8775p: Use PWRSTS_RET_ON for USB20 GDSC
    - PENDING: clk: qcom: gcc-qcs8300: Use PWRSTS_RET_ON for USB20 GDSC
    - PENDING: arm64: dts: qcom: Add fan controller support for
      qcs8275-iq-8275-evk
    - PENDING: net: stmmac: Add NULL check for match data
    - BACKPORT: PCI: host-common: Make the driver as a common library for host
      controller drivers
    - PENDING: arm64: dts: qcom: Enable vqmmc voltage switching for
      qcs8275-iq-8275-evk-pro-sku
    - PENDING: arm64: dts: qcom: Enable vqmmc voltage switching for
      qcs8275-iq-8275-evk
    - PENDING: soc: qcom: ice: Add check for ice node status
    - QCLINUX: firmware: qcom: tz_log: Probe driver if hyp logs are
      unavailable
    - PENDING: time/sched_clock: export sched_clock_read_begin/retry()
    - QCLINUX: arm64: deconfig: qcom: set gpio-keys driver as module
    - PENDING: net: stmmac: Add new reset domains to reset serdes
    - PENDING: net: PCS: Check and recover pcs link after serdes reset
    - PENDING: net: stmmac: Enable dma mapping for rx queues 8-11
    - PENDING: pinctrl: qcom: sa8797p: Remove PCIe PERST GPIOs from
      wakeirq_map
    - QCLINUX: arm64: dts: qcom: qcs9075: Enable DISPLAY-PORT
    - PENDING: phy: qmp: ufs: Add UFS HS_G4 phy settings
    - PENDING: drm/msm/dp: Add support for parsing and applying
    - BACKPORT: PCI: host-generic: Rename and export gen_pci_init() to allow
      ECAM creation
    - BACKPORT: PCI: dwc: Export dwc MSI controller related APIs
    - BACKPORT: PCI: qcom: Add support for Qualcomm SA8255p based PCIe root
      complex
    - PENDING: arm64: dts: qcom: Add audio config reserved memory for sa8255
    - PENDING: arm64: dts: qcom: qcs6490: Add native DP support without Type-C
    - PENDING: arm64: dts: qcom: Add PMIC thermal sensors on sa8255p
    - BACKPORT: arch64: asm: gunyah: add appropriate header file
    - PENDING: drivers: virt: gunyah: add gh_ctrl config
    - PENDING: arm64: dts: qcom: Update vqmmc voltage control gpio for qcs8275
      boards
    - QCLINUX: ASoC: qcom: qcs9100: Fix hardware params constraints callback
      settings
    - PENDING: iommu/arm-smmu: prevent NULL pointer dereference during fault
    - BACKPORT: wifi: ath12k: Add support to simulate firmware crash
    - BACKPORT: wifi: ath12k: Fetch regdb.bin file from board-2.bin
    - PENDING: arm64: dts: Enable BT_EN pin via GPIO55 on Monza
    - PENDING: arm64: dts: qcom: sa8255p: update apps smmu node
    - FROMLIST: phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
    - FROMLIST: drm/msm/dp: Add DisplayPort support for QCS615
    - FROMLIST: drm/msm/dp: Retry Link Training 2 with lower pattern
    - PENDING: arm64: dts: qcom: qcs6490: Enable HDMI audio
    - QCLINUX: arm64: dts: qcom: qcs9075: Enable DISPLAY-PORT for edp0
    - PENDING: net: stmmac:  Add device presence check in TX flush path
    - QCLINUX: arm64: dts: qcom: addons soundcard support for monaco monza
    - PENDING: coresight: create buffer with SG mode if device supports sw-usb
    - QCLINUX: coresight: etr: Use noncontiguous api instead of noncoherent
    - PENDING: driver: bluetooth: btusb: add default nvm file
    - QCLINUX: ARM: dts: msm: add opp-table for mdss0_dsi0 for sa8775p
    - PENDING: arm64: dts: qcom: qcs615: enable IPCB TGU device
    - PENDING: arm64: dts: qcom: iq9-mezz: enable mdss1 display Port
    - PENDING: arm64: dts: qcom: Add PCIe support for monza EVK board
    - PENDING: arm64: dts: qcom: Set GPIO54 high for WiFi rfkill on Monza EVK
    - QCLINUX: arm64: defconfig: Remove LOCKDEP & KASAN
    - QCLINUX: firmware: qcom_scm_addon: Add SMC call to set GPU SMMU aperture
      for GOS SID
    - PENDING: arm64: dts: qcom: Add UFS support for monza EVK board
    - PENDING: net: stmmac: Add support for External time source
    - PENDING: pinctrl: qcom: fix qcs8300 lpass lpi ext_mclk1_c pinctrl
      setting
    - PENDING: arm64: dts: qcom: monaco-monza: Enable GPI DMA and QUPv3
      firmware support
    - QCLINUX: Revert "FROMLIST: remoteproc: qcom: Add helper function to
      support IOMMU devmem translation"
    - QCLINUX: Revert "FROMLIST: remoteproc: qcom: Add iommu map_unmap helper
      function"
    - FROMLIST: firmware: qcom_scm: Rename peripheral as pas_id
    - FROMLIST: firmware: qcom_scm: Introduce PAS context initialization
      helper function
    - FROMLIST: remoteproc: pas: Replace metadata context with PAS context
      structure
    - FROMLIST: soc: qcom: mdtloader: Add PAS context aware
      qcom_mdt_pas_load() function
    - FROMLIST: soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported
      symbols
    - FROMLIST: firmware: qcom_scm: Add a prep version of auth_and_reset
      function
    - FROMLIST: firmware: qcom_scm: Simplify qcom_scm_pas_init_image()
    - FROMLIST: firmware: qcom_scm: Add SHM bridge handling for PAS when
      running without QHEE
    - FROMLIST: firmware: qcom_scm: Add qcom_scm_pas_get_rsc_table() to get
      resource table
    - FROMLIST: remoteproc: pas: Extend parse_fw callback to fetch resources
      via SMC call
    - FROMLIST: remoteproc: qcom: pas: Enable Secure PAS support with IOMMU
      managed by Linux
    - PENDING: arm64: dts: qcom: Add host mode support
    - PENDING: arm64: dts: qcom: Add mode as host for type A ports for QCS8275
      IQ8 EVK PRO SKU MEZZ
    - PENDING: arm64: dts: qcom: Add host mode support
    - FROMLIST: arm64: dts: qcom: Add DisplayPort support for QCS615
    - FROMLIST: arm64: dts: qcom: Enable DisplayPort on QCS615 RIDE platform
    - FROMLIST: soc: qcom: mdt_loader: Add helper functions to map and unmap
      resources
    - FROMLIST: arm64: dts: qcom: Add EL2 overlay for sa8775p
    - QCLINUX: arm64: defconfig: qcom: Enable CONFIG_SND_SOC_BT_SCO
    - PENDING: drm/bridge: lt9611uxc: Add support for audio in hdmi_codec_ops
    - FROMLIST: arm64: dts: qcom: Add support for QCS615 Talos evk board
    - QCLINUX: arm64: dts: qcom: talos-adddons-evk: add Talos addons EVK
    - QCLINUX: arm64: dts: qcom: qcs8275: add lpi i2s4 related changes
    - QCLINUX: arm64: configs: qcom_debug: Enable ATH11K CFR
    - PENDING: net: stmmac: Enable dma mapping for rx queues 8-11
    - PENDING: net: PCS: Loopback TX to RX clocks when XPCS link fail
    - BACKPORT: arm64: dts: qcom: qcs615-ride: Add PSCI SYSTEM_RESET2 types
    - QCLINUX: config: disable config for panel_event_notifier driver
    - FROMLIST: wifi: ath11k: Add initialization and deinitialization sequence
      for CFR module
    - BACKPORT: wifi: ath12k: add 11d scan offload support
    - BACKPORT: wifi: ath12k: store and send country code to firmware after
      recovery
    - QCLINUX: arm64: qcom_debug: Enable ath12k coredump
    - QCLINUX: arm64: dts: qcom: Enable lvds support for rb8
    - QCLINUX: firmware: qcom_scm_addon: add scm call to enable tz ffi
    - FROMLIST: wifi: ath11k: Register debugfs for CFR configuration
    - FROMLIST: wifi: ath11k: Add support unassociated client CFR
    - FROMLIST: wifi: ath11k: Register relayfs entries for CFR dump
    - FROMLIST: wifi: ath11k: Register DBR event handler for CFR data
    - FROMLIST: wifi: ath11k: Register handler for CFR capture event
    - PENDING: driver: bluetooth: btqca: Add WCN6855 firmware priority
      selection feature
    - PENDING: arm64: dts: qcom: Enable type A ports for QCS8275 IQ8 EVK MEZZ
    - PENDING: net: stmmac: dw25gmac: Configure DMA interrupt mode for multi-
      IRQ support
    - QCLINUX: arm64: dts: qcom: qcs8275-evk-pro-sku: add lpi i2s4 related
      changes
    - PENDING: arm64: dts: qcom: Correct IRQ for i2c13 and add UART13 node
    - PENDING: arm64: dts: qcom: qcs8300: Add mode as OTG for primary USB
    - QCLINUX: arm64: dts: qcom: qcs8275: use bt sco dai bt-sco-pcm-wb
    - PENDING: ASoC: qcom: qcs8275: add dapm routings on bt-sco
    - QCLINUX: Enable EDAC_QCOM
    - PENDING: net: stmmac: Add support for combined per-channel TX/RX
      interrupts
    - PENDING: arm64: dts: qcom: qcs6490: Enable DP audio
    - QCLINUX: pci: misc: qps615: Return gracefully during FW failure
    - QCLINUX: thermal: qcom: Update logic to set trip in tsens driver
    - QCLINUX: Revert "Merge "QCLINUX: arm64: qcom_defconfig: Enable PCIe L1
      sub states""
    - QCLINUX: firmware: qcom_scm_addon: remove QuIC Copyright
    - QCLINUX: arm64: dts: qcom: remove QuIC Copyright for sc7280 platform
    - PENDING: arm64: dts: qcom: monaco: Enable lvds support for iq8-mezz
    - QCLINUX: arm64: defconfig: enable QCA808X PHY driver
    - FROMLIST: arm64: dts: qcom: add lt8713sx bridge for iq8
    - FROMLIST: defconfig: qcom: Enable lt8713sx bridge driver
    - FROMLIST: drm/bridge: add support for lontium lt8713sx bridge driver
    - PENDING: ASoC: qcom: qcs9100: add support for monaco monza
    - PENDING: ASoC: qcom: qcs9100: modify support for monaco monza
    - QCLINUX: arm64: dts: qcom: modify soundcard support for monaco monza
    - QCLINUX: Add support for debugcc measure for DDR and CPU on SA8775P
    - QCLINUX: clk: qcom: Add measure support for clock controllers on SA8775P
    - QCLINUX: clk: qcom: Add clock measure support for QCS8300
    - QCLINUX: arm64: defconfig: Enable CLK_QCOM_DEBUG
    - QCLINUX: arm64: dts: qcom: Add supoort DDR and CPU measure on SA8775P
    - QCLINUX: arm64: dts: qcom: Add clock measure support on SA8775P
    - QCLINUX: arm64: dts: qcom: Add clock measure support on QCS8300
    - PENDING: Bluetooth: hci_qca: QCC2072 enablement
    - PENDING: Bluetooth: hci_qca: update name of QCC2072 FW files
    - FROMLIST: soc: qcom: ice: Add OPP-based clock scaling support for ICE
    - FROMLIST: soc: qcom: ice: Set ICE clk to TURBO on probe
    - PENDING: arm64: dts: qcom: Add OPP table for ICE device for KLM targets
    - PENDING: arm64: dts: qcom: qcs6490_ia: Delete the hdmi-dai-link as it is
      unsupported
    - FROMLIST: drm/msm/dsi/phy_7nm: fix rounding error in recalc_rate
    - PENDING: arm64: qcom: dts: Enable PCIe1 node for qcm6490-idp
    - BACKPORT: UPSTREAM: ASoC: qcom: sc8280xp: Extend sound card support
    - QCLINUX: ASoC: qcom: qcm6490: Cleanup qcm6490 and qcs9100 driver
    - PENDING: ASoC: qcom: add mclk and jack support for mi2s audio
    - BACKPORT: UPSTREAM: arm64: dts: qcom: qcs6490-rb3gen2: Modify sound card
      name
    - QCLINUX: arm64: dts: qcom: qcs6490-addon-rb3gen2: Move pinctrl handling
      to the msm-stub codec
    - QCLINUX: arm64: dts: qcom: qcs9075-addon-iq-evk: Rename sound card name
    - QCLINUX: arm64: dts: qcom: sa8775p-addon-ride: Update sa8775p Ridesx
      sound card compatible
    - QCLINUX: arm64: dts: qcom: qcs8275-addon-iq-evk: Rename sound card name
    - QCLINUX: arm64: dts: qcom: qcs8300-addon-ride: Update qcs8300 Ridesx
      sound card compatible
    - QCLINUX: arm64: dts: qcom: qcm6490-idp: Move pinctrl handling to the
      msm-stub codec
    - Revert "QCLINUX: arm64: dts: qcom: qcm6490-idp: Move pinctrl handling to
      the msm-stub codec"
    - Revert "QCLINUX: arm64: dts: qcom: qcs8300-addon-ride: Update qcs8300
      Ridesx sound card compatible"
    - Revert "QCLINUX: arm64: dts: qcom: qcs8275-addon-iq-evk: Rename sound
      card name"
    - Revert "QCLINUX: arm64: dts: qcom: sa8775p-addon-ride: Update sa8775p
      Ridesx sound card compatible"
    - Revert "QCLINUX: arm64: dts: qcom: qcs9075-addon-iq-evk: Rename sound
      card name"
    - Revert "QCLINUX: arm64: dts: qcom: qcs6490-addon-rb3gen2: Move pinctrl
      handling to the msm-stub codec"
    - Revert "BACKPORT: UPSTREAM: arm64: dts: qcom: qcs6490-rb3gen2: Modify
      sound card name"
    - Revert "PENDING: ASoC: qcom: add mclk and jack support for mi2s audio"
    - Revert "QCLINUX: ASoC: qcom: qcm6490: Cleanup qcm6490 and qcs9100
      driver"
    - Revert "BACKPORT: UPSTREAM: ASoC: qcom: sc8280xp: Extend sound card
      support"

Date: 2026-01-25 07:00:10.719249+00:00
Changed-By: Masahiro Yamada <masahiro.yamada at canonical.com>
Signed-By: Andy Whitcroft <apw at canonical.com>
https://launchpad.net/ubuntu/+source/linux-qcom/6.8.0-1060.61
-------------- next part --------------
Sorry, changesfile not available.

More information about the noble-changes mailing list