[ubuntu/oneiric] grub-installer 1.64ubuntu1 (Accepted)
Colin Watson
cjwatson at ubuntu.com
Wed May 18 10:30:19 UTC 2011
grub-installer (1.64ubuntu1) oneiric; urgency=low
* Resynchronise with Debian. Remaining changes:
- Show the grub menu and raise the menu timeout if other operating
systems are installed (only for GRUB Legacy right now).
- Remove splash boot parameter unless debian-installer/framebuffer=true
and debian-installer/splash=true.
- If / or /boot are on a removable device, install GRUB there by
default.
- Only mount /target/proc if it isn't already mounted.
- Support setting OVERRIDE_UNSUPPORTED_OS in the environment to force
grub-installer to use its default MBR selection method despite there
being unsupported operating systems on the disk.
- Unless grub-installer/make_active is preseeded to false, mark the
partition to which GRUB is being installed as bootable, or failing
that the first available primary partition on the disk to which GRUB
is being installed.
- Support grub-installer/bootdev_directory preseeding to make use of the
relative path feature of grub4dos, so that we can point grub4dos at
part of a disk for Wubi. Setting this disables normal grub
installation, but still generates a device.map (for GRUB Legacy only);
it also hides the menu.
- Handle cases where /boot is bind-mounted.
- Add support for writing an GRUB Legacy MBR on each disk in an
mdadm-managed RAID providing /boot. (GRUB 2 can handle this already.)
- Properly make use of output from os-prober to configure the booting of
other operating systems on dmraid arrays. Attempt to guess where in
the device map the array belongs, by substituting the first drive in
the dmraid array for the dmraid array device node itself, and removing
any reference to other member disks of the array.
- Go back to using update-grub -y for GRUB Legacy for now; our grub
package is a bit old and still requires this.
- Default to grub2 for GPT systems.
- Allow grub/grub2 choice for ext4, though still default to grub2.
- If /boot is on an MD device and we're using GRUB 2, install GRUB there
rather than (hd0); GRUB 2 will interpret that as meaning that it needs
to install to each of the RAID members.
- If using GRUB 2 and installing to a RAID device any of whose
components are partitions, then default to installing to the MBRs of
each of the containing disks, since GRUB 2 will refuse to install to
the partition devices.
- Bind-mount /proc and /sys while running grub-install.
- Update grub-installer/bootdev text to avoid GRUB device naming that
changed between GRUB Legacy and GRUB 2, and to use libata-style device
naming since that is more accurate for most people.
- On i386/efi and amd64/efi subarchitectures, install grub-efi and purge
grub, grub-legacy, and grub-pc; elsewhere, purge grub-efi*.
- Don't ask for a boot device on EFI, and don't pass a boot device
argument to grub-install.
- Add a preseedable grub-installer/timeout template to adjust the
initial GRUB timeout.
- Install GRUB to the SATA RAID or multipath device when /boot is on
such a device, rather than installing to the first hard disk.
- Remove grub-gfxpayload-lists in situations where we need to remove
grub-pc.
grub-installer (1.64) unstable; urgency=low
* Ensure that /boot/zfs exists in the target before copying zpool.cache to
it.
* Purge grub-pc-bin as well as grub-pc if GRUB Legacy is to be used,
anticipating changes to the grub2 source package.
[ Updated translations ]
* Asturian (ast.po) by MAAC
* Italian (it.po) by Milo Casagrande
grub-installer (1.63) unstable; urgency=low
* Team Upload
[ Samuel Thibault ]
* grub-installer: Handle Mach serial device name.
[ Updated translations ]
* Belarusian (be.po) by Pavel Piatruk
* Bulgarian (bg.po) by Damyan Ivanov
* Czech (cs.po) by Miroslav Kure
* German (de.po) by Holger Wansing
* Esperanto (eo.po) by Felipe Castro
* Estonian (et.po) by Mattias Põldaru
* Georgian (ka.po) by Aiet Kolkhi
* Korean (ko.po) by Changwoo Ryu
* Marathi (mr.po) by sampada
* Nepali (ne.po)
* Romanian (ro.po) by Eddy Petrișor
* Russian (ru.po) by Yuri Kozlov
* Slovak (sk.po) by Ivan Masár
* Swedish (sv.po) by Daniel Nylander
* Uyghur (ug.po) by Sahran
* Simplified Chinese (zh_CN.po) by YunQiang Su
grub-installer (1.62) unstable; urgency=low
* Team upload
* Upload to resync translations
grub-installer (1.61) unstable; urgency=low
[ Jeremie Koenig ]
* Add the Hurd hard disk devices to the $disc_offered_devfs regexp and
switch cases.
* Add grub_package="grub-pc" on Hurd, and add a default case for the
sake of future porters.
[ Christian Perrier ]
* Make "grub-installer/grub_not_mature_on_this_platform" translatable
[ Colin Watson ]
* If the first disk has neither a partition table nor a filesystem, don't
try to install to it as grub-setup will refuse (LP: #711830).
[ Otavio Salvador ]
* Set debconf title to avoid reusing a previous one.
[ Updated translations ]
* Telugu (te.po) by Arjuna Rao Chavala
Date: Wed, 18 May 2011 11:25:04 +0100
Changed-By: Colin Watson <cjwatson at ubuntu.com>
Maintainer: Ubuntu Installer Team <ubuntu-installer at lists.ubuntu.com>
Signed-By: Colin Watson <cjwatson at canonical.com>
https://launchpad.net/ubuntu/oneiric/+source/grub-installer/1.64ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Wed, 18 May 2011 11:25:04 +0100
Source: grub-installer
Binary: grub-installer
Architecture: source
Version: 1.64ubuntu1
Distribution: oneiric
Urgency: low
Maintainer: Ubuntu Installer Team <ubuntu-installer at lists.ubuntu.com>
Changed-By: Colin Watson <cjwatson at ubuntu.com>
Description:
grub-installer - Install GRUB on a hard disk (udeb)
Launchpad-Bugs-Fixed: 711830
Changes:
grub-installer (1.64ubuntu1) oneiric; urgency=low
.
* Resynchronise with Debian. Remaining changes:
- Show the grub menu and raise the menu timeout if other operating
systems are installed (only for GRUB Legacy right now).
- Remove splash boot parameter unless debian-installer/framebuffer=true
and debian-installer/splash=true.
- If / or /boot are on a removable device, install GRUB there by
default.
- Only mount /target/proc if it isn't already mounted.
- Support setting OVERRIDE_UNSUPPORTED_OS in the environment to force
grub-installer to use its default MBR selection method despite there
being unsupported operating systems on the disk.
- Unless grub-installer/make_active is preseeded to false, mark the
partition to which GRUB is being installed as bootable, or failing
that the first available primary partition on the disk to which GRUB
is being installed.
- Support grub-installer/bootdev_directory preseeding to make use of the
relative path feature of grub4dos, so that we can point grub4dos at
part of a disk for Wubi. Setting this disables normal grub
installation, but still generates a device.map (for GRUB Legacy only);
it also hides the menu.
- Handle cases where /boot is bind-mounted.
- Add support for writing an GRUB Legacy MBR on each disk in an
mdadm-managed RAID providing /boot. (GRUB 2 can handle this already.)
- Properly make use of output from os-prober to configure the booting of
other operating systems on dmraid arrays. Attempt to guess where in
the device map the array belongs, by substituting the first drive in
the dmraid array for the dmraid array device node itself, and removing
any reference to other member disks of the array.
- Go back to using update-grub -y for GRUB Legacy for now; our grub
package is a bit old and still requires this.
- Default to grub2 for GPT systems.
- Allow grub/grub2 choice for ext4, though still default to grub2.
- If /boot is on an MD device and we're using GRUB 2, install GRUB there
rather than (hd0); GRUB 2 will interpret that as meaning that it needs
to install to each of the RAID members.
- If using GRUB 2 and installing to a RAID device any of whose
components are partitions, then default to installing to the MBRs of
each of the containing disks, since GRUB 2 will refuse to install to
the partition devices.
- Bind-mount /proc and /sys while running grub-install.
- Update grub-installer/bootdev text to avoid GRUB device naming that
changed between GRUB Legacy and GRUB 2, and to use libata-style device
naming since that is more accurate for most people.
- On i386/efi and amd64/efi subarchitectures, install grub-efi and purge
grub, grub-legacy, and grub-pc; elsewhere, purge grub-efi*.
- Don't ask for a boot device on EFI, and don't pass a boot device
argument to grub-install.
- Add a preseedable grub-installer/timeout template to adjust the
initial GRUB timeout.
- Install GRUB to the SATA RAID or multipath device when /boot is on
such a device, rather than installing to the first hard disk.
- Remove grub-gfxpayload-lists in situations where we need to remove
grub-pc.
.
grub-installer (1.64) unstable; urgency=low
.
* Ensure that /boot/zfs exists in the target before copying zpool.cache to
it.
* Purge grub-pc-bin as well as grub-pc if GRUB Legacy is to be used,
anticipating changes to the grub2 source package.
.
[ Updated translations ]
* Asturian (ast.po) by MAAC
* Italian (it.po) by Milo Casagrande
.
grub-installer (1.63) unstable; urgency=low
.
* Team Upload
.
[ Samuel Thibault ]
* grub-installer: Handle Mach serial device name.
.
[ Updated translations ]
* Belarusian (be.po) by Pavel Piatruk
* Bulgarian (bg.po) by Damyan Ivanov
* Czech (cs.po) by Miroslav Kure
* German (de.po) by Holger Wansing
* Esperanto (eo.po) by Felipe Castro
* Estonian (et.po) by Mattias Põldaru
* Georgian (ka.po) by Aiet Kolkhi
* Korean (ko.po) by Changwoo Ryu
* Marathi (mr.po) by sampada
* Nepali (ne.po)
* Romanian (ro.po) by Eddy Petrișor
* Russian (ru.po) by Yuri Kozlov
* Slovak (sk.po) by Ivan Masár
* Swedish (sv.po) by Daniel Nylander
* Uyghur (ug.po) by Sahran
* Simplified Chinese (zh_CN.po) by YunQiang Su
.
grub-installer (1.62) unstable; urgency=low
.
* Team upload
* Upload to resync translations
.
grub-installer (1.61) unstable; urgency=low
.
[ Jeremie Koenig ]
* Add the Hurd hard disk devices to the $disc_offered_devfs regexp and
switch cases.
* Add grub_package="grub-pc" on Hurd, and add a default case for the
sake of future porters.
.
[ Christian Perrier ]
* Make "grub-installer/grub_not_mature_on_this_platform" translatable
.
[ Colin Watson ]
* If the first disk has neither a partition table nor a filesystem, don't
try to install to it as grub-setup will refuse (LP: #711830).
.
[ Otavio Salvador ]
* Set debconf title to avoid reusing a previous one.
.
[ Updated translations ]
* Telugu (te.po) by Arjuna Rao Chavala
Checksums-Sha1:
88242dc86433d548de58e3de3f138bfa479b780c 1956 grub-installer_1.64ubuntu1.dsc
fd3d4217a1f21294a68e208c8c4a9efe6129017f 203629 grub-installer_1.64ubuntu1.tar.gz
Checksums-Sha256:
fa482ba76078a983a9b09ad58fc687affabf994406078a4f10f0806f77b84ab4 1956 grub-installer_1.64ubuntu1.dsc
d85219fde253adb0a7c00b2ea93606b747de3a783e9777b351a64ac9b0a2284c 203629 grub-installer_1.64ubuntu1.tar.gz
Files:
980c34e7282c3c90480ca409f40055f0 1956 debian-installer standard grub-installer_1.64ubuntu1.dsc
67f02596794555688bb56774db5f0ced 203629 debian-installer standard grub-installer_1.64ubuntu1.tar.gz
Original-Maintainer: Debian Install System Team <debian-boot at lists.debian.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Colin Watson <cjwatson at debian.org> -- Debian developer
iQIVAwUBTdOe0zk1h9l9hlALAQicORAAsrToJ7iNYv/eo6Y+s9RvMkUjnkEbQ5VJ
M89D/5p7RsstFsNrJGs2gz6LvbzI0L0fHcnt/b0q8tITnSnG78omhfFADxWes+XT
KUrDhux7SZSS/noyb+ip9K2WkUeCcgq1d49LkFCSJtXfgMdr95iGIzEptQmyM7gF
uOQICGiFs70AZuFyfD+LarkhhXNJ01m2qHkwwkLh4qyZ11BCNag8Z75V74wtJUHT
wNRqAuxGtxLiqQgtXYvjouIqvXElgrwPVmpWF//KayMgn8n9TUgimfJngetja5sz
ua5ez28G18Ul5rkS2sW3AgsNTQKzZ7sC3+2+JOVyYSyObOjenvtyOJRv65v0Jv+f
7s09MDzzEJ8Ww6ewD1yCNXkfvDzCzRz+9M4dlBVStOu/eir+1CdrReT0cZO3Xzeg
Ls3W1XyWK50RlqudnYqAKDilIlGqASOUU7oCxUhYpJKMTtXexIWm+yqiERlpmhWp
Gk9UdSymk1Ypo1q7pTk3l6/LvY97MeXuwD7FtxKCPw9OWWospJPTqC3kJhEX0cet
twFQu4C0p9VZAfgv6JI55UXkCj1nbXhfvUs+Tju7AtOYbTPwxBC1npqxsVR+Smq0
HelWvqL0Jh+91Sa/emCt9W2A3IrmnusrgAyGDIejpRh0VcfKWENp+YZT99JHgmy7
1rhf+p2a2c0=
=T0FG
-----END PGP SIGNATURE-----
More information about the Oneiric-changes
mailing list