[ubuntu/raring-proposed] linux 3.8.0-11.20 (Accepted)

Tim Gardner tim.gardner at canonical.com
Tue Mar 5 20:31:06 UTC 2013


linux (3.8.0-11.20) raring; urgency=low

  [ Tim Gardner ]

  * Release Tracking Bug
    - LP: #1147659
  * [Config] CONFIG_SPI_PXA2XX_PCI=m
    - LP: #1031169
  * CONFIG_SATA_ZPODD=y
    - LP: #1031180
  * CONFIG_GPIO_LYNXPOINT=y
    - LP: #1031174

  [ Upstream Kernel Changes ]

  * spi/pxa2xx-pci: switch to use pcim_* interfaces
    - LP: #1031169
  * spi/pxa2xx: embed the ssp_device to platform data
    - LP: #1031169
  * spi/pxa2xx: allow building on a 64-bit kernel
    - LP: #1031169
  * spi/pxa2xx: fix warnings when compiling a 64-bit kernel
    - LP: #1031169
  * spi/pxa2xx: convert to the pump message infrastructure
    - LP: #1031169
  * spi/pxa2xx: convert to the common clk framework
    - LP: #1031169
  * spi/pxa2xx: break out the private DMA API usage into a separate file
    - LP: #1031169
  * spi/pxa2xx: add support for DMA engine
    - LP: #1031169
  * spi/pxa2xx: add support for runtime PM
    - LP: #1031169
  * spi/pxa2xx: add support for SPI_LOOP
    - LP: #1031169
  * spi/pxa2xx: add support for Intel Low Power Subsystem SPI
    - LP: #1031169
  * spi/pxa2xx: add support for Lynxpoint SPI controllers
    - LP: #1031169
  * i2c-designware: always set the STOP bit after last byte
    - LP: #1031166
  * i2c-designware: add minimal support for runtime PM
    - LP: #1031166
  * i2c-designware: add support for Intel Lynxpoint
    - LP: #1031166
  * remove can_power_off flag from scsi_device
    - LP: #1031180
  * sr: support runtime pm
    - LP: #1031180
  * libata: identify and init ZPODD devices
    - LP: #1031180
  * libata: move acpi notification code to zpodd
    - LP: #1031180
  * libata: check zero power ready status for ZPODD
    - LP: #1031180
  * libata: handle power transition of ODD
    - LP: #1031180
  * libata: expose pm qos flags for ata device
    - LP: #1031180
  * libata: do not suspend port if normal ODD is attached
    - LP: #1031180
  * pm: differentiate system and runtime pm for ata port
    - LP: #1031180
  * PM code cleanup for ata port
    - LP: #1031180
  * scsi: no poll when ODD is powered off
    - LP: #1031180
  * Set proper SK when CK_COND is set.
    - LP: #1031180
  * fix smatch warning for zpodd_wake_dev
    - LP: #1031180
  * gpio/lynxpoint: add chipset gpio driver.
    - LP: #1031174

Date: Tue, 05 Mar 2013 05:42:44 -0700
Changed-By: Tim Gardner <tim.gardner at canonical.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
https://launchpad.net/ubuntu/raring/+source/linux/3.8.0-11.20
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Tue, 05 Mar 2013 05:42:44 -0700
Source: linux
Binary: linux-source-3.8.0 linux-doc linux-tools-common linux-headers-3.8.0-11 linux-libc-dev linux-tools-3.8.0-11 linux-image-3.8.0-11-generic linux-image-extra-3.8.0-11-generic linux-headers-3.8.0-11-generic linux-image-3.8.0-11-generic-dbgsym linux-image-3.8.0-11-omap linux-image-extra-3.8.0-11-omap linux-headers-3.8.0-11-omap linux-image-3.8.0-11-omap-dbgsym kernel-image-3.8.0-11-generic-di nic-modules-3.8.0-11-generic-di nic-shared-modules-3.8.0-11-generic-di serial-modules-3.8.0-11-generic-di ppp-modules-3.8.0-11-generic-di pata-modules-3.8.0-11-generic-di firewire-core-modules-3.8.0-11-generic-di scsi-modules-3.8.0-11-generic-di plip-modules-3.8.0-11-generic-di floppy-modules-3.8.0-11-generic-di fat-modules-3.8.0-11-generic-di nfs-modules-3.8.0-11-generic-di md-modules-3.8.0-11-generic-di multipath-modules-3.8.0-11-generic-di usb-modules-3.8.0-11-generic-di pcmcia-storage-modules-3.8.0-11-generic-di fb-modules-3.8.0-11-generic-di input-modules-3.8.0-11-generic-di
 mouse-modules-3.8.0-11-generic-di irda-modules-3.8.0-11-generic-di parport-modules-3.8.0-11-generic-di nic-pcmcia-modules-3.8.0-11-generic-di pcmcia-modules-3.8.0-11-generic-di nic-usb-modules-3.8.0-11-generic-di sata-modules-3.8.0-11-generic-di crypto-modules-3.8.0-11-generic-di squashfs-modules-3.8.0-11-generic-di speakup-modules-3.8.0-11-generic-di virtio-modules-3.8.0-11-generic-di fs-core-modules-3.8.0-11-generic-di fs-secondary-modules-3.8.0-11-generic-di storage-core-modules-3.8.0-11-generic-di block-modules-3.8.0-11-generic-di message-modules-3.8.0-11-generic-di vlan-modules-3.8.0-11-generic-di
 ipmi-modules-3.8.0-11-generic-di
Architecture: source
Version: 3.8.0-11.20
Distribution: raring
Urgency: low
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Tim Gardner <tim.gardner at canonical.com>
Description: 
 block-modules-3.8.0-11-generic-di - Block storage devices (udeb)
 crypto-modules-3.8.0-11-generic-di - crypto modules (udeb)
 fat-modules-3.8.0-11-generic-di - FAT filesystem support (udeb)
 fb-modules-3.8.0-11-generic-di - Framebuffer modules (udeb)
 firewire-core-modules-3.8.0-11-generic-di - Firewire (IEEE-1394) Support (udeb)
 floppy-modules-3.8.0-11-generic-di - Floppy driver support (udeb)
 fs-core-modules-3.8.0-11-generic-di - Base filesystem modules (udeb)
 fs-secondary-modules-3.8.0-11-generic-di - Extra filesystem modules (udeb)
 input-modules-3.8.0-11-generic-di - Support for various input methods (udeb)
 ipmi-modules-3.8.0-11-generic-di - ipmi modules (udeb)
 irda-modules-3.8.0-11-generic-di - Support for Infrared protocols (udeb)
 kernel-image-3.8.0-11-generic-di - Linux kernel binary image for the Debian installer (udeb)
 linux-doc  - Linux kernel specific documentation for version 3.8.0
 linux-headers-3.8.0-11 - Header files related to Linux kernel version 3.8.0
 linux-headers-3.8.0-11-generic - Linux kernel headers for version 3.8.0 on 64 bit x86 SMP
 linux-headers-3.8.0-11-omap - Linux kernel headers for version 3.8.0 on TI OMAP3-based 64 bit x
 linux-image-3.8.0-11-generic - Linux kernel image for version 3.8.0 on 64 bit x86 SMP
 linux-image-3.8.0-11-generic-dbgsym - Linux kernel debug image for version 3.8.0 on 64 bit x86 SMP
 linux-image-3.8.0-11-omap - Linux kernel image for version 3.8.0 on TI OMAP3-based 64 bit x86
 linux-image-3.8.0-11-omap-dbgsym - Linux kernel debug image for version 3.8.0 on TI OMAP3-based 64 b
 linux-image-extra-3.8.0-11-generic - Linux kernel image for version 3.8.0 on 64 bit x86 SMP
 linux-image-extra-3.8.0-11-omap - Linux kernel image for version 3.8.0 on TI OMAP3-based 64 bit x86
 linux-libc-dev - Linux Kernel Headers for development
 linux-source-3.8.0 - Linux kernel source for version 3.8.0 with Ubuntu patches
 linux-tools-3.8.0-11 - Linux kernel version specific tools for version 3.8.0-11
 linux-tools-common - Linux kernel version specific tools for version 3.8.0
 md-modules-3.8.0-11-generic-di - Multi-device support (raid, device-mapper, lvm) (udeb)
 message-modules-3.8.0-11-generic-di - Fusion and i2o storage modules (udeb)
 mouse-modules-3.8.0-11-generic-di - Mouse support (udeb)
 multipath-modules-3.8.0-11-generic-di - DM-Multipath support (udeb)
 nfs-modules-3.8.0-11-generic-di - NFS filesystem drivers (udeb)
 nic-modules-3.8.0-11-generic-di - Network interface support (udeb)
 nic-pcmcia-modules-3.8.0-11-generic-di - PCMCIA network interface support (udeb)
 nic-shared-modules-3.8.0-11-generic-di - nic shared modules (udeb)
 nic-usb-modules-3.8.0-11-generic-di - USB network interface support (udeb)
 parport-modules-3.8.0-11-generic-di - Parallel port support (udeb)
 pata-modules-3.8.0-11-generic-di - PATA support modules (udeb)
 pcmcia-modules-3.8.0-11-generic-di - PCMCIA Modules (udeb)
 pcmcia-storage-modules-3.8.0-11-generic-di - PCMCIA storage support (udeb)
 plip-modules-3.8.0-11-generic-di - PLIP (parallel port) networking support (udeb)
 ppp-modules-3.8.0-11-generic-di - PPP (serial port) networking support (udeb)
 sata-modules-3.8.0-11-generic-di - SATA storage support (udeb)
 scsi-modules-3.8.0-11-generic-di - SCSI storage support (udeb)
 serial-modules-3.8.0-11-generic-di - Serial port support (udeb)
 speakup-modules-3.8.0-11-generic-di - speakup modules (udeb)
 squashfs-modules-3.8.0-11-generic-di - squashfs modules (udeb)
 storage-core-modules-3.8.0-11-generic-di - Core storage support (udeb)
 usb-modules-3.8.0-11-generic-di - Core USB support (udeb)
 virtio-modules-3.8.0-11-generic-di - VirtIO Modules (udeb)
 vlan-modules-3.8.0-11-generic-di - vlan modules (udeb)
Launchpad-Bugs-Fixed: 1031166 1031169 1031174 1031180 1147659
Changes: 
 linux (3.8.0-11.20) raring; urgency=low
 .
   [ Tim Gardner ]
 .
   * Release Tracking Bug
     - LP: #1147659
   * [Config] CONFIG_SPI_PXA2XX_PCI=m
     - LP: #1031169
   * CONFIG_SATA_ZPODD=y
     - LP: #1031180
   * CONFIG_GPIO_LYNXPOINT=y
     - LP: #1031174
 .
   [ Upstream Kernel Changes ]
 .
   * spi/pxa2xx-pci: switch to use pcim_* interfaces
     - LP: #1031169
   * spi/pxa2xx: embed the ssp_device to platform data
     - LP: #1031169
   * spi/pxa2xx: allow building on a 64-bit kernel
     - LP: #1031169
   * spi/pxa2xx: fix warnings when compiling a 64-bit kernel
     - LP: #1031169
   * spi/pxa2xx: convert to the pump message infrastructure
     - LP: #1031169
   * spi/pxa2xx: convert to the common clk framework
     - LP: #1031169
   * spi/pxa2xx: break out the private DMA API usage into a separate file
     - LP: #1031169
   * spi/pxa2xx: add support for DMA engine
     - LP: #1031169
   * spi/pxa2xx: add support for runtime PM
     - LP: #1031169
   * spi/pxa2xx: add support for SPI_LOOP
     - LP: #1031169
   * spi/pxa2xx: add support for Intel Low Power Subsystem SPI
     - LP: #1031169
   * spi/pxa2xx: add support for Lynxpoint SPI controllers
     - LP: #1031169
   * i2c-designware: always set the STOP bit after last byte
     - LP: #1031166
   * i2c-designware: add minimal support for runtime PM
     - LP: #1031166
   * i2c-designware: add support for Intel Lynxpoint
     - LP: #1031166
   * remove can_power_off flag from scsi_device
     - LP: #1031180
   * sr: support runtime pm
     - LP: #1031180
   * libata: identify and init ZPODD devices
     - LP: #1031180
   * libata: move acpi notification code to zpodd
     - LP: #1031180
   * libata: check zero power ready status for ZPODD
     - LP: #1031180
   * libata: handle power transition of ODD
     - LP: #1031180
   * libata: expose pm qos flags for ata device
     - LP: #1031180
   * libata: do not suspend port if normal ODD is attached
     - LP: #1031180
   * pm: differentiate system and runtime pm for ata port
     - LP: #1031180
   * PM code cleanup for ata port
     - LP: #1031180
   * scsi: no poll when ODD is powered off
     - LP: #1031180
   * Set proper SK when CK_COND is set.
     - LP: #1031180
   * fix smatch warning for zpodd_wake_dev
     - LP: #1031180
   * gpio/lynxpoint: add chipset gpio driver.
     - LP: #1031174
Checksums-Sha1: 
 bbfa059bcad72cd29373272e7366defced5e2066 6599 linux_3.8.0-11.20.dsc
 409ec680d06568f9c379473275bdae97e3e2ade2 111015791 linux_3.8.0-11.20.tar.gz
Checksums-Sha256: 
 f2da3ec4625b9d7128ae512338a4848263bdd1704a04b8eee3e7bc1894f8b2a8 6599 linux_3.8.0-11.20.dsc
 f05e0c11e3a00098d178026a4c5899d6662d77517e1f88c69c734874f63e93d4 111015791 linux_3.8.0-11.20.tar.gz
Files: 
 58698c3d5125d21fa0da8138fa11b04d 6599 devel optional linux_3.8.0-11.20.dsc
 ac82ad0a721f2038ed41fd5b7fc3da04 111015791 devel optional linux_3.8.0-11.20.tar.gz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
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=YxT8
-----END PGP SIGNATURE-----


More information about the Raring-changes mailing list