[ubuntu/raring-proposed] linux-lowlatency 3.8.0-12.8 (Accepted)
Andy Whitcroft
apw at canonical.com
Thu Mar 7 18:00:25 UTC 2013
linux-lowlatency (3.8.0-12.8) raring; urgency=low
[ Andy Whitcroft ]
* rebase to Ubuntu-3.8.0-12.21
[ Ubuntu: 3.8.0-12.21 ]
* [Config] CONFIG_PSTORE=n for x86
* Release Tracking Bug
- LP: #1152228
* Revert "efivarfs: guid part of filenames are case-insensitive"
- LP: #1146988
* Revert "efivarfs: Validate filenames much more aggressively"
- LP: #1146988
* mfd: rtsx: Optimize card detect flow
- LP: #1148892
* mfd: rtsx: Fix issue that booting OS with SD card inserted
- LP: #1148892
[ Ubuntu: 3.8.0-11.20 ]
* Release Tracking Bug
- LP: #1147659
* [Config] CONFIG_SPI_PXA2XX_PCI=m
- LP: #1031169
* CONFIG_SATA_ZPODD=y
- LP: #1031180
* CONFIG_GPIO_LYNXPOINT=y
- LP: #1031174
* spi/pxa2xx-pci: switch to use pcim_* interfaces
- LP: #1031169
* spi/pxa2xx: embed the ssp_device to platform data
- LP: #1031169
* spi/pxa2xx: allow building on a 64-bit kernel
- LP: #1031169
* spi/pxa2xx: fix warnings when compiling a 64-bit kernel
- LP: #1031169
* spi/pxa2xx: convert to the pump message infrastructure
- LP: #1031169
* spi/pxa2xx: convert to the common clk framework
- LP: #1031169
* spi/pxa2xx: break out the private DMA API usage into a separate file
- LP: #1031169
* spi/pxa2xx: add support for DMA engine
- LP: #1031169
* spi/pxa2xx: add support for runtime PM
- LP: #1031169
* spi/pxa2xx: add support for SPI_LOOP
- LP: #1031169
* spi/pxa2xx: add support for Intel Low Power Subsystem SPI
- LP: #1031169
* spi/pxa2xx: add support for Lynxpoint SPI controllers
- LP: #1031169
* i2c-designware: always set the STOP bit after last byte
- LP: #1031166
* i2c-designware: add minimal support for runtime PM
- LP: #1031166
* i2c-designware: add support for Intel Lynxpoint
- LP: #1031166
* remove can_power_off flag from scsi_device
- LP: #1031180
* sr: support runtime pm
- LP: #1031180
* libata: identify and init ZPODD devices
- LP: #1031180
* libata: move acpi notification code to zpodd
- LP: #1031180
* libata: check zero power ready status for ZPODD
- LP: #1031180
* libata: handle power transition of ODD
- LP: #1031180
* libata: expose pm qos flags for ata device
- LP: #1031180
* libata: do not suspend port if normal ODD is attached
- LP: #1031180
* pm: differentiate system and runtime pm for ata port
- LP: #1031180
* PM code cleanup for ata port
- LP: #1031180
* scsi: no poll when ODD is powered off
- LP: #1031180
* Set proper SK when CK_COND is set.
- LP: #1031180
* fix smatch warning for zpodd_wake_dev
- LP: #1031180
* gpio/lynxpoint: add chipset gpio driver.
- LP: #1031174
[ Ubuntu: 3.8.0-10.19 ]
* [Config] annotate CONFIG_PATA_ACPI
* rebase to v3.8.2
* NFC: Fixed nfc core and hci unregistration and cleanup
- LP: #1083994
* NFC: Added error handling in event_received hci ops
- LP: #1083994
* NFC: Changed event_received hci ops result semantic
- LP: #1083994
* NFC: Fixed skb leak in tm_send() nfc and hci ops implementations
- LP: #1083994
* NFC: Add HCI quirks to support driver (non)standard implementations
- LP: #1083994
* USB: Don't use EHCI port sempahore for USB 3.0 hubs.
- LP: #1011415
* USB: Prepare for refactoring by adding extra udev checks.
- LP: #1011415
* USB: Rip out recursive call on warm port reset.
- LP: #1011415
* USB: Fix connected device switch to Inactive state.
- LP: #1011415
* USB: Use helper function hub_set_port_link_state
- LP: #1011415
* USB: Refactor hub_port_wait_reset.
- LP: #1011415
* usb/core: consider link speed while looking at bMaxPower
- LP: #1011415
* usb/core: update power budget for SuperSpeed
- LP: #1011415
* usb: Add driver/usb/core/(port.c,hub.h) files
- LP: #1011415
* usb: fix compilation error and warning of driver/usb/core/port.c on arm
and blackfin
- LP: #1011415
* usb: Add "portX/connect_type" attribute to expose usb port's connect
type
- LP: #1011415
* usb: Create link files between child device and usb port device.
- LP: #1011415
* USB: Set usb port's DeviceRemovable according acpi information
- LP: #1011415
* USB: fix sign-extension bug in the hub driver
- LP: #1011415
* usb: add runtime pm support for usb port device
- LP: #1011415
* usb: add usb port auto power off mechanism
- LP: #1011415
* usb: expose usb port's pm qos flags to user space
- LP: #1011415
* usb: enable usb port device's async suspend.
- LP: #1011415
* drm: add prime helpers
- LP: #1138440
* drm/nouveau: use prime helpers
- LP: #1138440
* drm/radeon: use prime helpers
- LP: #1138440
* rebase to v3.8.2
- LP: #961286
* Release Tracking Bug
- LP: #1144449
Date: Thu, 07 Mar 2013 17:19:41 +0000
Changed-By: Andy Whitcroft <apw at canonical.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/raring/+source/linux-lowlatency/3.8.0-12.8
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Thu, 07 Mar 2013 17:19:41 +0000
Source: linux-lowlatency
Binary: linux-lowlatency-headers-3.8.0-12 linux-image-3.8.0-12-lowlatency linux-image-extra-3.8.0-12-lowlatency linux-headers-3.8.0-12-lowlatency linux-image-3.8.0-12-lowlatency-dbgsym
Architecture: source
Version: 3.8.0-12.8
Distribution: raring
Urgency: low
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Andy Whitcroft <apw at canonical.com>
Description:
linux-headers-3.8.0-12-lowlatency - Linux kernel headers for version 3.8.0 on x86/x86_64
linux-image-3.8.0-12-lowlatency - Linux kernel image for version 3.8.0 on x86/x86_64
linux-image-3.8.0-12-lowlatency-dbgsym - Linux kernel debug image for version 3.8.0 on x86/x86_64
linux-image-extra-3.8.0-12-lowlatency - Linux kernel image for version 3.8.0 on x86/x86_64
linux-lowlatency-headers-3.8.0-12 - Header files related to Linux kernel version 3.8.0
Launchpad-Bugs-Fixed: 961286 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1011415 1031166 1031166 1031166 1031169 1031169 1031169 1031169 1031169 1031169 1031169 1031169 1031169 1031169 1031169 1031169 1031169 1031174 1031174 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1031180 1083994 1083994 1083994 1083994 1083994 1138440 1138440 1138440 1144449 1146988 1146988 1147659 1148892 1148892 1152228
Changes:
linux-lowlatency (3.8.0-12.8) raring; urgency=low
.
[ Andy Whitcroft ]
.
* rebase to Ubuntu-3.8.0-12.21
.
[ Ubuntu: 3.8.0-12.21 ]
.
* [Config] CONFIG_PSTORE=n for x86
* Release Tracking Bug
- LP: #1152228
* Revert "efivarfs: guid part of filenames are case-insensitive"
- LP: #1146988
* Revert "efivarfs: Validate filenames much more aggressively"
- LP: #1146988
* mfd: rtsx: Optimize card detect flow
- LP: #1148892
* mfd: rtsx: Fix issue that booting OS with SD card inserted
- LP: #1148892
.
[ Ubuntu: 3.8.0-11.20 ]
.
* Release Tracking Bug
- LP: #1147659
* [Config] CONFIG_SPI_PXA2XX_PCI=m
- LP: #1031169
* CONFIG_SATA_ZPODD=y
- LP: #1031180
* CONFIG_GPIO_LYNXPOINT=y
- LP: #1031174
* spi/pxa2xx-pci: switch to use pcim_* interfaces
- LP: #1031169
* spi/pxa2xx: embed the ssp_device to platform data
- LP: #1031169
* spi/pxa2xx: allow building on a 64-bit kernel
- LP: #1031169
* spi/pxa2xx: fix warnings when compiling a 64-bit kernel
- LP: #1031169
* spi/pxa2xx: convert to the pump message infrastructure
- LP: #1031169
* spi/pxa2xx: convert to the common clk framework
- LP: #1031169
* spi/pxa2xx: break out the private DMA API usage into a separate file
- LP: #1031169
* spi/pxa2xx: add support for DMA engine
- LP: #1031169
* spi/pxa2xx: add support for runtime PM
- LP: #1031169
* spi/pxa2xx: add support for SPI_LOOP
- LP: #1031169
* spi/pxa2xx: add support for Intel Low Power Subsystem SPI
- LP: #1031169
* spi/pxa2xx: add support for Lynxpoint SPI controllers
- LP: #1031169
* i2c-designware: always set the STOP bit after last byte
- LP: #1031166
* i2c-designware: add minimal support for runtime PM
- LP: #1031166
* i2c-designware: add support for Intel Lynxpoint
- LP: #1031166
* remove can_power_off flag from scsi_device
- LP: #1031180
* sr: support runtime pm
- LP: #1031180
* libata: identify and init ZPODD devices
- LP: #1031180
* libata: move acpi notification code to zpodd
- LP: #1031180
* libata: check zero power ready status for ZPODD
- LP: #1031180
* libata: handle power transition of ODD
- LP: #1031180
* libata: expose pm qos flags for ata device
- LP: #1031180
* libata: do not suspend port if normal ODD is attached
- LP: #1031180
* pm: differentiate system and runtime pm for ata port
- LP: #1031180
* PM code cleanup for ata port
- LP: #1031180
* scsi: no poll when ODD is powered off
- LP: #1031180
* Set proper SK when CK_COND is set.
- LP: #1031180
* fix smatch warning for zpodd_wake_dev
- LP: #1031180
* gpio/lynxpoint: add chipset gpio driver.
- LP: #1031174
.
[ Ubuntu: 3.8.0-10.19 ]
.
* [Config] annotate CONFIG_PATA_ACPI
* rebase to v3.8.2
* NFC: Fixed nfc core and hci unregistration and cleanup
- LP: #1083994
* NFC: Added error handling in event_received hci ops
- LP: #1083994
* NFC: Changed event_received hci ops result semantic
- LP: #1083994
* NFC: Fixed skb leak in tm_send() nfc and hci ops implementations
- LP: #1083994
* NFC: Add HCI quirks to support driver (non)standard implementations
- LP: #1083994
* USB: Don't use EHCI port sempahore for USB 3.0 hubs.
- LP: #1011415
* USB: Prepare for refactoring by adding extra udev checks.
- LP: #1011415
* USB: Rip out recursive call on warm port reset.
- LP: #1011415
* USB: Fix connected device switch to Inactive state.
- LP: #1011415
* USB: Use helper function hub_set_port_link_state
- LP: #1011415
* USB: Refactor hub_port_wait_reset.
- LP: #1011415
* usb/core: consider link speed while looking at bMaxPower
- LP: #1011415
* usb/core: update power budget for SuperSpeed
- LP: #1011415
* usb: Add driver/usb/core/(port.c,hub.h) files
- LP: #1011415
* usb: fix compilation error and warning of driver/usb/core/port.c on arm
and blackfin
- LP: #1011415
* usb: Add "portX/connect_type" attribute to expose usb port's connect
type
- LP: #1011415
* usb: Create link files between child device and usb port device.
- LP: #1011415
* USB: Set usb port's DeviceRemovable according acpi information
- LP: #1011415
* USB: fix sign-extension bug in the hub driver
- LP: #1011415
* usb: add runtime pm support for usb port device
- LP: #1011415
* usb: add usb port auto power off mechanism
- LP: #1011415
* usb: expose usb port's pm qos flags to user space
- LP: #1011415
* usb: enable usb port device's async suspend.
- LP: #1011415
* drm: add prime helpers
- LP: #1138440
* drm/nouveau: use prime helpers
- LP: #1138440
* drm/radeon: use prime helpers
- LP: #1138440
* rebase to v3.8.2
- LP: #961286
* Release Tracking Bug
- LP: #1144449
Checksums-Sha1:
cbcaf9a505cac49b3462bfab728347470ce346cc 1990 linux-lowlatency_3.8.0-12.8.dsc
3e3bdc7948e793a3299e89c413b1e52e76e979b9 107676304 linux-lowlatency_3.8.0-12.8.tar.gz
Checksums-Sha256:
34cdf45fa4fd69c5e233b808ff0bcbf7007c15d966bf6822350de5203267576e 1990 linux-lowlatency_3.8.0-12.8.dsc
d91d996290b9a507a544f6ca3cbe9baf63107f57e153e3654f75850e172f95ed 107676304 linux-lowlatency_3.8.0-12.8.tar.gz
Files:
df0382ddc198749670eb0f45adc4cf93 1990 devel optional linux-lowlatency_3.8.0-12.8.dsc
7d08d8535ac41dd9fea6981548374dee 107676304 devel optional linux-lowlatency_3.8.0-12.8.tar.gz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=zaLS
-----END PGP SIGNATURE-----
More information about the Raring-changes
mailing list