[ubuntu/resolute-proposed] rpi-eeprom 28.14-0ubuntu1 (Accepted)

Dave Jones dave.jones at canonical.com
Thu Mar 5 19:36:18 UTC 2026


rpi-eeprom (28.14-0ubuntu1) resolute; urgency=medium

  * New upstream release. Fixes VC4 operation on CM5 under Ubuntu Core 24
    (LP: #2128161)
  * d/p/fix-rust-coreutils.patch: Removed obsolete patch
  * d/control: Bump standards version

rpi-eeprom (28.14-1) trixie; urgency=medium

  [ Tim Gover ]
  * salsa-ci: Remove extract-source section
  * help: copy-edit
  * pieeprom-2026-02-23: 2711: Fix partition walk for boot_ramdisk /
    secure_boot (latest)
  * pieeprom-2026-02-23: 2712: Fix partition walk for boot_ramdisk /
    secure-boot (latest)

  [ Nicolai Buchwitz ]
  * rpi-eeprom-update: add CM4S (board_type 21) support

  [ Serge Schneider ]
  * d/salsa-ci.yml: Fetch master branch before building

rpi-eeprom (28.13-1) trixie; urgency=medium

  * pieeprom-2026-01-16: 2712: Assume eMMC for CM4/CM5 (latest)
  * pieeprom-2026-01-21: 2712: Fix bad HMAC arguments lockup (latest)
  * firmware: Archive old 'latest' release binaries
  * pieeprom-2026-02-06: 2711: Add support for customer OTP rows in
    conditional expressions (latest)
  * pieeprom-2026-02-06: 2712: config: Add support for customer OTP rows
    in conditional expressions (latest)

rpi-eeprom (28.12-1) trixie; urgency=medium

  * pieeprom-2026-01-09: 2711: Promote to the default release

rpi-eeprom (28.11-1) trixie; urgency=medium

  * imager: make-imager-release: Automatically select latest default
    EEPROM date
  * rpi-eeprom-config: Use time.monotonic for timeouts instead of wall
    clock
  * pieeprom-2026-01-09: 2711: arm_loader: Apply rpifwcrypto lock
    permissions GET/SET USER OTP (latest)

rpi-eeprom (28.10-1) trixie; urgency=medium

  * pieeprom-2025-12-08: 2711: Add machine ID derived from OTP values
    (latest)
  * pieeprom-2025-12-08: 2712: arm_loader: Add machine ID derived from OTP
    values (latest)
  * pieeprom-2025-12-08: 2712: 2711: Promote to the default release

rpi-eeprom (28.9-1) trixie; urgency=medium

  [ Lincoln Thurlow ]
  * Fix the error message for config signing

  [ Tim Gover ]
  * imager: Delete temporary release-2711, release-2712 directories
  * pieeprom-2025-11-21: 2712: Allow longer overlay file paths (latest)
  * pieeprom-2025-11-21: 2711: recovery: Restore recovery_wait option
    (latest)
  * tools: imager: Add make-pi4-rpiboot-gpio-sd
  * pieeprom-2025-11-27: 2712: Stop partition-walk after boot-mode
    timeout/retries limit (latest)
  * pieeprom-2025-11-27: 2711: helpers/config_loader: Also support
    bootvar0 eeprom config on Pi4 (latest)

  [ Phil Elwell ]
  * tools: imager: make-pi4-rpiboot-gpio-sd: Minor typos

  [ Andrew Scheller ]
  * Fix remaining typo

rpi-eeprom (28.8-1) trixie; urgency=medium

  * 2025-11-09: Promote 2025-11-05 to the default release (default)
  * imager: Move the imager release to 2025-11-05

rpi-eeprom (28.7-1) trixie; urgency=medium

  * pieeprom-2025-11-05: 2711: arm_loader: Add
    iommu_dma_numa_policy=interleave when needed (latest)
  * pieeprom-2025-11-05: 2712: arm_loader: Add
    iommu_dma_numa_policy=interleave when needed (latest)

rpi-eeprom (28.6-1) trixie; urgency=medium

  * pieeprom-2025-09-22: 2712: Add LZ4 decompressor (latest)
  * pieeprom-2025-09-22: 2711: Add LZ4 decompressor (latest)
  * pieeprom-2025-09-23: 2711: Fix network install regression on Pi4
    (latest)
  * pieeprom-2025-09-23: 2712: Fix TFTP to allow larger files (latest)
  * pieeprom-2025-09-25: 2712: Apply UART_BAUD in early bootsys UART init
    (latest)
  * pieeprom-2025-10-03: 2711: arm_dt: Report OTP SDRAM size via device-
    tree (latest)
  * pieeprom-2025-10-08: 2711: Fix accidental set of PM_RSTS bit 5 when
    stopping watchdog (latest)
  * pieeprom-2025-10-08: 2712: Fix accidental set of PM_RSTS bit 5 when
    stopping watchdog (latest)
  * pieeprom-2025-10-14: 2711: Use ROM boot-mode flag to detect rpiboot
    mode (latest)
  * pieeprom-2025-10-17: Enable background refresh on 2712d0 for all SDRAM
    sizes (latest)

rpi-eeprom (28.5-1) trixie; urgency=medium

  [ Tim Gover ]
  * rpi-otp-private-key: Fix missing escape character in usage text
  * pieeprom-2025-08-27: 2711: Fix PARTITION property to allow default (0)
    partition property to be overridden (latest)
  * pieeprom-2025-08-27: 2712:  Fix PARTITION property to allow default
    (0) partition to be overridden (latest)

  [ Andrew Scheller ]
  * Add link to old 2712 EEPROM images to releases.md page

rpi-eeprom (28.4-1) trixie; urgency=medium

  * pieeprom-2025-08-13: 2711: Enable PARTITION_WALK property by default
    (latest)
  * pieeprom-2025-08-13: 2712: Enable the PARTITION_WALK property by
    default (latest)
  * rpi-eeprom-config: Improve No space available error message
  * pieeprom-2025-08-20: 2711: Fix PARTITION_WALK for missing start.elf
    files (latest)
  * pieeprom-2025-08-20: 2712: force_eeprom_read=0 disables HAT I2C
    (latest)
  * rpi-otp-private-key: Describe how to store an ECDSA P-256 private key

rpi-eeprom (28.3-2) trixie; urgency=medium

  * Switch gbp.conf debian branch to pios/trixie
  * Add libpython3-stdlib to build dependencies

rpi-eeprom (28.3-1) bookworm; urgency=medium

  * pieeprom-2025-06-13: 2712: Update to include production test changes
    (latest)
  * pieeprom-2025-06-20: 2712: Add support for a bootloader watchdog
    (latest)
  * pieeprom-2025-06-29: 2712: Check for SD card overcurrent on Pi5 and
    Pi500 (latest)
  * pieeprom-2025-07-03: 2712: Enable firmware UART output on the 40-pin
    header (latest)
  * 2712: Archive releases older than 2025-05-08
  * pieeprom-2025-07-03: 2711: Check for SD card overcurrent (latest)
  * 2711: Archive releases older than 2025-05-08
  * pieeprom-2025-07-17: 2712: arm_loader: Also require the early-watchdog
    property (latest)
  * pieeprom-2025-07-17: 2711: Also require the early-watchdog property
    (latest)
  * release-notes: s/bootarg0/bootvar0/
  * pieeprom-2025-07-17: 2712: Fix config key search which could cause
    camera_autodetect to fail (latest)

rpi-eeprom (28.2-1) bookworm; urgency=medium

  * pieeprom-2025-06-09: 2712: NVMe: Fix loading of files > 32MB (latest)

rpi-eeprom (28.1-1) bookworm; urgency=medium

  * tools: Add the network install public key
  * 2711: Change the automatic update minimum version to 2025-05-08
  * 2711: release-notes: Add (automatic) tag

rpi-eeprom (28.0-1) bookworm; urgency=medium

  * 2712: Change the automatic update minimum version to 2025-05-08

rpi-eeprom (27.10-1) bookworm; urgency=medium

  * imager: 2712: 2711: Update to the 2025-05-08 firmware
  * pieeprom-2025-05-16: 2711: Automatically set revoke_devkey if
    program_pubkey=1 (latest)

rpi-eeprom (27.9-1) bookworm; urgency=medium

  * pieeprom-2025-05-08: 2712: Promote to the default release
  * pieeprom-2025-05-08: 2711: Promote to the default release

rpi-eeprom (27.8-1) bookworm; urgency=medium

  * pieeprom-2025-05-08: 2712: Implement TCP window for net boot (latest)
  * pieeprom-2025-02-24: 2711: Implement TCP window for net boot (latest)
  * pieeprom-2025-05-08: 2711: Implement TCP window for net boot (latest)

rpi-eeprom (27.7-1) bookworm; urgency=medium

  * pieeprom-2025-03-27: 2712: os_check: cm5: Check for CM5 specific DTBs
    (latest)
  * rpi-sign-bootcode: Add optional callout to HSM wrapper script from
    PKCS#1 v1.5 signature
  * pieeprom-2025-04-07: 2712: Revert to using the max fan speed (latest)
  * test: Add github workflow for test-rpi-eeprom-config
  * test: Add a README
  * Update maintainer

rpi-eeprom (27.6-1) bookworm; urgency=medium

  [ Tim Gover ]
  * pieeprom-2025-03-10-12: Promote 2025-10-03 to the default release
  * firmware: 2712: Archive old '2712' 'latest' firmware
  * pieeprom-2025-03-19: 2712: Log the fan speed at boot (latest)

  [ Nicolai Buchwitz ]
  * bug_report template: Add missing CM5 + pi500

Date: Wed, 04 Mar 2026 14:20:34 +0000
Changed-By: Dave Jones <dave.jones at canonical.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/rpi-eeprom/28.14-0ubuntu1
-------------- next part --------------
Format: 1.8
Date: Wed, 04 Mar 2026 14:20:34 +0000
Source: rpi-eeprom
Built-For-Profiles: noudeb
Architecture: source
Version: 28.14-0ubuntu1
Distribution: resolute
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Dave Jones <dave.jones at canonical.com>
Launchpad-Bugs-Fixed: 2128161
Changes:
 rpi-eeprom (28.14-0ubuntu1) resolute; urgency=medium
 .
   * New upstream release. Fixes VC4 operation on CM5 under Ubuntu Core 24
     (LP: #2128161)
   * d/p/fix-rust-coreutils.patch: Removed obsolete patch
   * d/control: Bump standards version
 .
 rpi-eeprom (28.14-1) trixie; urgency=medium
 .
   [ Tim Gover ]
   * salsa-ci: Remove extract-source section
   * help: copy-edit
   * pieeprom-2026-02-23: 2711: Fix partition walk for boot_ramdisk /
     secure_boot (latest)
   * pieeprom-2026-02-23: 2712: Fix partition walk for boot_ramdisk /
     secure-boot (latest)
 .
   [ Nicolai Buchwitz ]
   * rpi-eeprom-update: add CM4S (board_type 21) support
 .
   [ Serge Schneider ]
   * d/salsa-ci.yml: Fetch master branch before building
 .
 rpi-eeprom (28.13-1) trixie; urgency=medium
 .
   * pieeprom-2026-01-16: 2712: Assume eMMC for CM4/CM5 (latest)
   * pieeprom-2026-01-21: 2712: Fix bad HMAC arguments lockup (latest)
   * firmware: Archive old 'latest' release binaries
   * pieeprom-2026-02-06: 2711: Add support for customer OTP rows in
     conditional expressions (latest)
   * pieeprom-2026-02-06: 2712: config: Add support for customer OTP rows
     in conditional expressions (latest)
 .
 rpi-eeprom (28.12-1) trixie; urgency=medium
 .
   * pieeprom-2026-01-09: 2711: Promote to the default release
 .
 rpi-eeprom (28.11-1) trixie; urgency=medium
 .
   * imager: make-imager-release: Automatically select latest default
     EEPROM date
   * rpi-eeprom-config: Use time.monotonic for timeouts instead of wall
     clock
   * pieeprom-2026-01-09: 2711: arm_loader: Apply rpifwcrypto lock
     permissions GET/SET USER OTP (latest)
 .
 rpi-eeprom (28.10-1) trixie; urgency=medium
 .
   * pieeprom-2025-12-08: 2711: Add machine ID derived from OTP values
     (latest)
   * pieeprom-2025-12-08: 2712: arm_loader: Add machine ID derived from OTP
     values (latest)
   * pieeprom-2025-12-08: 2712: 2711: Promote to the default release
 .
 rpi-eeprom (28.9-1) trixie; urgency=medium
 .
   [ Lincoln Thurlow ]
   * Fix the error message for config signing
 .
   [ Tim Gover ]
   * imager: Delete temporary release-2711, release-2712 directories
   * pieeprom-2025-11-21: 2712: Allow longer overlay file paths (latest)
   * pieeprom-2025-11-21: 2711: recovery: Restore recovery_wait option
     (latest)
   * tools: imager: Add make-pi4-rpiboot-gpio-sd
   * pieeprom-2025-11-27: 2712: Stop partition-walk after boot-mode
     timeout/retries limit (latest)
   * pieeprom-2025-11-27: 2711: helpers/config_loader: Also support
     bootvar0 eeprom config on Pi4 (latest)
 .
   [ Phil Elwell ]
   * tools: imager: make-pi4-rpiboot-gpio-sd: Minor typos
 .
   [ Andrew Scheller ]
   * Fix remaining typo
 .
 rpi-eeprom (28.8-1) trixie; urgency=medium
 .
   * 2025-11-09: Promote 2025-11-05 to the default release (default)
   * imager: Move the imager release to 2025-11-05
 .
 rpi-eeprom (28.7-1) trixie; urgency=medium
 .
   * pieeprom-2025-11-05: 2711: arm_loader: Add
     iommu_dma_numa_policy=interleave when needed (latest)
   * pieeprom-2025-11-05: 2712: arm_loader: Add
     iommu_dma_numa_policy=interleave when needed (latest)
 .
 rpi-eeprom (28.6-1) trixie; urgency=medium
 .
   * pieeprom-2025-09-22: 2712: Add LZ4 decompressor (latest)
   * pieeprom-2025-09-22: 2711: Add LZ4 decompressor (latest)
   * pieeprom-2025-09-23: 2711: Fix network install regression on Pi4
     (latest)
   * pieeprom-2025-09-23: 2712: Fix TFTP to allow larger files (latest)
   * pieeprom-2025-09-25: 2712: Apply UART_BAUD in early bootsys UART init
     (latest)
   * pieeprom-2025-10-03: 2711: arm_dt: Report OTP SDRAM size via device-
     tree (latest)
   * pieeprom-2025-10-08: 2711: Fix accidental set of PM_RSTS bit 5 when
     stopping watchdog (latest)
   * pieeprom-2025-10-08: 2712: Fix accidental set of PM_RSTS bit 5 when
     stopping watchdog (latest)
   * pieeprom-2025-10-14: 2711: Use ROM boot-mode flag to detect rpiboot
     mode (latest)
   * pieeprom-2025-10-17: Enable background refresh on 2712d0 for all SDRAM
     sizes (latest)
 .
 rpi-eeprom (28.5-1) trixie; urgency=medium
 .
   [ Tim Gover ]
   * rpi-otp-private-key: Fix missing escape character in usage text
   * pieeprom-2025-08-27: 2711: Fix PARTITION property to allow default (0)
     partition property to be overridden (latest)
   * pieeprom-2025-08-27: 2712:  Fix PARTITION property to allow default
     (0) partition to be overridden (latest)
 .
   [ Andrew Scheller ]
   * Add link to old 2712 EEPROM images to releases.md page
 .
 rpi-eeprom (28.4-1) trixie; urgency=medium
 .
   * pieeprom-2025-08-13: 2711: Enable PARTITION_WALK property by default
     (latest)
   * pieeprom-2025-08-13: 2712: Enable the PARTITION_WALK property by
     default (latest)
   * rpi-eeprom-config: Improve No space available error message
   * pieeprom-2025-08-20: 2711: Fix PARTITION_WALK for missing start.elf
     files (latest)
   * pieeprom-2025-08-20: 2712: force_eeprom_read=0 disables HAT I2C
     (latest)
   * rpi-otp-private-key: Describe how to store an ECDSA P-256 private key
 .
 rpi-eeprom (28.3-2) trixie; urgency=medium
 .
   * Switch gbp.conf debian branch to pios/trixie
   * Add libpython3-stdlib to build dependencies
 .
 rpi-eeprom (28.3-1) bookworm; urgency=medium
 .
   * pieeprom-2025-06-13: 2712: Update to include production test changes
     (latest)
   * pieeprom-2025-06-20: 2712: Add support for a bootloader watchdog
     (latest)
   * pieeprom-2025-06-29: 2712: Check for SD card overcurrent on Pi5 and
     Pi500 (latest)
   * pieeprom-2025-07-03: 2712: Enable firmware UART output on the 40-pin
     header (latest)
   * 2712: Archive releases older than 2025-05-08
   * pieeprom-2025-07-03: 2711: Check for SD card overcurrent (latest)
   * 2711: Archive releases older than 2025-05-08
   * pieeprom-2025-07-17: 2712: arm_loader: Also require the early-watchdog
     property (latest)
   * pieeprom-2025-07-17: 2711: Also require the early-watchdog property
     (latest)
   * release-notes: s/bootarg0/bootvar0/
   * pieeprom-2025-07-17: 2712: Fix config key search which could cause
     camera_autodetect to fail (latest)
 .
 rpi-eeprom (28.2-1) bookworm; urgency=medium
 .
   * pieeprom-2025-06-09: 2712: NVMe: Fix loading of files > 32MB (latest)
 .
 rpi-eeprom (28.1-1) bookworm; urgency=medium
 .
   * tools: Add the network install public key
   * 2711: Change the automatic update minimum version to 2025-05-08
   * 2711: release-notes: Add (automatic) tag
 .
 rpi-eeprom (28.0-1) bookworm; urgency=medium
 .
   * 2712: Change the automatic update minimum version to 2025-05-08
 .
 rpi-eeprom (27.10-1) bookworm; urgency=medium
 .
   * imager: 2712: 2711: Update to the 2025-05-08 firmware
   * pieeprom-2025-05-16: 2711: Automatically set revoke_devkey if
     program_pubkey=1 (latest)
 .
 rpi-eeprom (27.9-1) bookworm; urgency=medium
 .
   * pieeprom-2025-05-08: 2712: Promote to the default release
   * pieeprom-2025-05-08: 2711: Promote to the default release
 .
 rpi-eeprom (27.8-1) bookworm; urgency=medium
 .
   * pieeprom-2025-05-08: 2712: Implement TCP window for net boot (latest)
   * pieeprom-2025-02-24: 2711: Implement TCP window for net boot (latest)
   * pieeprom-2025-05-08: 2711: Implement TCP window for net boot (latest)
 .
 rpi-eeprom (27.7-1) bookworm; urgency=medium
 .
   * pieeprom-2025-03-27: 2712: os_check: cm5: Check for CM5 specific DTBs
     (latest)
   * rpi-sign-bootcode: Add optional callout to HSM wrapper script from
     PKCS#1 v1.5 signature
   * pieeprom-2025-04-07: 2712: Revert to using the max fan speed (latest)
   * test: Add github workflow for test-rpi-eeprom-config
   * test: Add a README
   * Update maintainer
 .
 rpi-eeprom (27.6-1) bookworm; urgency=medium
 .
   [ Tim Gover ]
   * pieeprom-2025-03-10-12: Promote 2025-10-03 to the default release
   * firmware: 2712: Archive old '2712' 'latest' firmware
   * pieeprom-2025-03-19: 2712: Log the fan speed at boot (latest)
 .
   [ Nicolai Buchwitz ]
   * bug_report template: Add missing CM5 + pi500
Checksums-Sha1:
 00772cfff289a49c9551b3d0ca9219faf9e0127e 2078 rpi-eeprom_28.14-0ubuntu1.dsc
 c4075d55ade5855b15f74f64f21b070708f12718 101992209 rpi-eeprom_28.14.orig.tar.gz
 79d4beb5f8a36d1921b23ff6b3a897ddc15d535f 19240 rpi-eeprom_28.14-0ubuntu1.debian.tar.xz
 4ea9dc7bc838ad7385b41ec998bbc62b2fc77201 6825 rpi-eeprom_28.14-0ubuntu1_source.buildinfo
Checksums-Sha256:
 4d236b415a6512444889e96edd24c7b0a07050ae52a82e82335c71d614529ad2 2078 rpi-eeprom_28.14-0ubuntu1.dsc
 52c50c706bb024504a8763a23c2d06049b6ca5342667fcbedc8195eb12e152bc 101992209 rpi-eeprom_28.14.orig.tar.gz
 021d3f3c7630e7555773c0b51828f9acea8ae6d065805c91818a9936e7912f76 19240 rpi-eeprom_28.14-0ubuntu1.debian.tar.xz
 aa213fc2541bba003da45a5c49da8c9b9a5925927e2458d33a9217cbfa19b7d9 6825 rpi-eeprom_28.14-0ubuntu1_source.buildinfo
Files:
 6be7f98f2bd0fa493ff84204cf767c31 2078 misc optional rpi-eeprom_28.14-0ubuntu1.dsc
 2696878a154c78d34dd50e2fdc4a4488 101992209 misc optional rpi-eeprom_28.14.orig.tar.gz
 cacb3a55907eb060e65bbd0be3bf3dc3 19240 misc optional rpi-eeprom_28.14-0ubuntu1.debian.tar.xz
 17bf08696b4bf60b244a9768d7130941 6825 misc optional rpi-eeprom_28.14-0ubuntu1_source.buildinfo
Original-Maintainer: Serge Schneider <serge at raspberrypi.org>


More information about the Resolute-changes mailing list