Classic image not working after upgrade on RPI 3

[Sergey Borovkov]

Hello. Full dpkg list - https://hastebin.com/qofatafaxu.sql
And this is the output of dpkg -l | grep -e uboot -e flash-kernel -e
firmware -e linux-raspi2 -e u-boot:
root at ubuntu:/home/ubuntu# dpkg -l | grep -e uboot -e flash-kernel -e
firmware -e linux-raspi2 -e u-boot
ii  flash-kernel                     3.0~rc.4ubuntu64~rpi3
             armhf        utility to make certain embedded devices bootable
ii  linux-firmware                   1.157.6                            all
         Firmware for Linux kernel drivers
ii  linux-firmware-raspi2            1.20161020-0ubuntu1~0.1
           armhf        RaspberryPi2 GPU firmware and bootloaders
ii  linux-raspi2                     4.4.0.1039.38
                     armhf        Complete Linux kernel for the BCM2709
architecture.
ii  linux-raspi2-headers-4.4.0-1009  4.4.0-1009.10
                     armhf        Header files related to Linux kernel
version 4.4.0
ii  linux-raspi2-headers-4.4.0-1029  4.4.0-1029.36
                     armhf        Header files related to Linux kernel
version 4.4.0
ii  linux-raspi2-headers-4.4.0-1038  4.4.0-1038.45
                     armhf        Header files related to Linux kernel
version 4.4.0
ii  linux-raspi2-headers-4.4.0-1039  4.4.0-1039.46
                     armhf        Header files related to Linux kernel
version 4.4.0
ii  u-boot-rpi:armhf                 2016.09+dfsg1-1~rpi3.1
            armhf        A boot loader for Raspberry PI systems
ii  u-boot-tools                     2016.09+dfsg1-1~rpi3.1
            armhf        companion tools for Das U-Boot bootloader


On 22 December 2016 at 06:46, Taihsiang Ho <tai271828 at gmail.com> wrote:

> Hi, Sergey,
>
> Would you please make sure the following packages are also updated by
>
> dpkg -l | grep -e uboot -e flash-kernel -e firmware -e linux-raspi2 -e
> u-boot
>
>
> And you should get the package information like this comment
> https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+
> bug/1636838/comments/20
>
> Cheers,
> Taihsiang
>
> 2016-12-22 2:48 GMT+08:00 Sergey Borovkov <serge.borovkov at gmail.com>:
>
>> Ok, so I enabled xenial proposed.
>>
>> Got following versions:
>> Setting up linux-firmware-raspi2 (1.20161020-0ubuntu1~0.1) ...
>> Setting up linux-raspi2-headers-4.4.0-1038 (4.4.0-1038.45) ...
>> Setting up linux-headers-4.4.0-1038-raspi2 (4.4.0-1038.45) ...
>> Setting up linux-image-raspi2 (4.4.0.1038.37) ...
>> Setting up linux-headers-raspi2 (4.4.0.1038.37) ...
>> Setting up linux-raspi2 (4.4.0.1038.37) ...
>> Setting up python3-cryptography (1.2.3-1ubuntu0.1) ...
>> Setting up python3-software-properties (0.96.20.5) ...
>> Setting up software-properties-common (0.96.20.5) ...
>>
>>
>> And again image does not boot after restart. Stuck in "starting kernel".
>>
>> On 21 December 2016 at 19:20, Chris Wayne <chris.wayne at canonical.com>
>> wrote:
>>
>>> Hi Sergey,
>>>
>>> Which image are you using?  Is it possible this is the same as this bug:
>>> https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1636838
>>> (which should now be fixed).  Perhaps you could try the PPA listed in that
>>> bug? (Note that this is technically a bug for rpi2, but I *believe* they
>>> may share the same kernel)
>>>
>>> Thanks
>>> Chris
>>>
>>> On Wed, Dec 21, 2016 at 9:57 AM, Sergey Borovkov <
>>> serge.borovkov at gmail.com> wrote:
>>>
>>>> Hi. After I did apt upgrade on classic image I can't boot my RPI
>>>> anymore. It's stuck on 'Starting kernel...'.
>>>> Tried different SD cards (on the second one I flashed out new classic
>>>> image and did upgrade as well) with the same result.
>>>>
>>>> --
>>>> Snapcraft mailing list
>>>> Snapcraft at lists.snapcraft.io
>>>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm
>>>> an/listinfo/snapcraft
>>>>
>>>>
>>>
>>> --
>>> Snapcraft mailing list
>>> Snapcraft at lists.snapcraft.io
>>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm
>>> an/listinfo/snapcraft
>>>
>>>
>>
>> --
>> Snapcraft mailing list
>> Snapcraft at lists.snapcraft.io
>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm
>> an/listinfo/snapcraft
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/snapcraft/attachments/20161222/4bc6c304/attachment-0001.html>