Pi2 and 3 image improvements (GLES, GPIO)

[Alejandro J. Cura]

It's all working perfectly on the raspi3, both with an hdmi monitor
plus a mouse, and with the original raspberry pi 7" touchscreen.

thanks again!
-- 
alecu

On Tue, Jan 24, 2017 at 4:30 PM, Alejandro J. Cura
<alejandro.cura at canonical.com> wrote:
> After installing with --devmode the very latest mir-kiosk that Albert just
> uploaded to the store in edge, and then reinstalling mir-kiosk-apps with
> devmode as well, I've got it all running on a raspi2.
> alecu at localhost:~$ snap list
> Name            Version        Rev  Developer  Notes
> core            16.04.1        976  canonical  -
> mir-kiosk       0.1            22   canonical  devmode
> mir-kiosk-apps  0.1            11   canonical  devmode
> mir-libs        0.1            20   canonical  devmode
> pi2             16.04-0.17     36   canonical  -
> pi2-kernel      4.4.0-1040-47  26   canonical  -
> alecu at localhost:~$ snap interfaces | grep mir
> :network                  mir-kiosk-apps
> :opengl                   mir-kiosk,mir-kiosk-apps
> mir-kiosk:mir             mir-kiosk-apps
> mir-libs:mir-libs         mir-kiosk,mir-kiosk-apps
> alecu at localhost:~$
>
> I'll give it a try on the raspi3 now.
>
> big thanks to Ogra and Albert that helped me debug this on #snappy.
>
> cheers,
> --
> alecu
>
> On Tue, Jan 24, 2017 at 6:36 AM, Oliver Grawert <ogra at ubuntu.com> wrote:
>>
>> hi,
>> Am Montag, den 23.01.2017, 17:53 -0300 schrieb Alejandro J. Cura:
>> >
>> > ...
>> > Any ideas on what I should try, or how to further debug this? I can
>> > upload the crash report if it helps.
>>
>> first of all make sure to only use the very latest daily edge image
>> (url is in my original mail, the setup only works with the right gadget
>> and kernel, they need to be in sync).
>>
>> all issues with mir were fixed with the most recent mir-kiosk snap so
>> you can just snap install them from the store from the edge channel (i
>> just tested them on two fresh installs on the pi2 and 3) ...
>>
>> there is however the content sharing interface involved in using the
>> mir-libs which still has issues, make sure you did the
>> disable/disconnect/connect/enable dance described on the mir wiki
>>
>> the least you should get is a black screen with a mouse cursor right
>> after (well about 15-30 sec after) boot ... it definitely works for me
>> on both test boards.
>>
>> ciao
>>         oli
>> --
>> Snapcraft mailing list
>> Snapcraft at lists.snapcraft.io
>> Modify settings or unsubscribe at:
>> https://lists.ubuntu.com/mailman/listinfo/snapcraft
>>
>