[ubuntu-ar] Lector de tarjetas SD/MMS
Agustín Argañaraz
aarganaraz at gmail.com
Fri Jun 5 18:38:22 BST 2009
El 5 de junio de 2009 14:25, AgustÃn Argañaraz <aarganaraz en gmail.com>escribió:
>
>
> El 5 de junio de 2009 14:17, Marco Antonio <mhoyos en gmail.com> escribió:
>
> El 5 de junio de 2009 13:28, AgustÃn Argañaraz<aarganaraz en gmail.com>
>> escribió:
>> >
>>
>> >
>> > Bus 002 Device 003: ID 064e:a104 Suyin Corp.
>>
>> esto corresponde al lector de tarjetas...
>>
>> https://answers.launchpad.net/ubuntu/+question/69374
>>
>> >
>> >>
>> >> - coloca una tarjeta de memoria en la lectora.
>> >>
>> >> - pasanos el comando dmesg (las ultimas lineas).
>> >
>> > Las últimas tres lÃneas son:
>> > [ 47.981660] CPU1 attaching sched-domain:
>> > [ 47.981662] domain 0: span 0-1 level CPU
>> > [ 47.981664] groups: 1 0
>> >
>>
>> porque las ultimas 3 ?? pasamos por lo menos, las ultimas 50..!!! :)
>>
>> pero lo que nos tenes que pasar, es despues de que hayas puesto una
>> tarjeta de memoria dentro del lector..!!!
>>
>>
>> >> - pasanos la salida del comando fdisk -l
>> >
>> > Disco /dev/sda: 320.0 GB, 320072933376 bytes
>> > 255 cabezas, 63 sectores/pista, 38913 cilindros
>> > Unidades = cilindros de 16065 * 512 = 8225280 bytes
>> > Identificador de disco: 0x0008030f
>> >
>> > Disposit. Inicio Comienzo Fin Bloques Id Sistema
>> > /dev/sda1 * 1 37879 304263036 83 Linux
>> > /dev/sda2 37880 38913 8305605 5 Extendida
>> > /dev/sda5 37880 38913 8305573+ 82 Linux swap /
>> Solaris
>> >
>>
>> me imagino que pusiste una tarjeta de memoria en el lector, y despues
>> ejecutaste el comando, no ??
>>
>> porque sino, tendras que hacerlo de nuevo... :)
>>
>> salu2
>>
>
> aca va lo que tira el comando con la tarjeta puesta:
> [ 0.780308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14
> 15) *0, disabled.
> [ 0.780535] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14
> 15) *0, disabled.
> [ 0.780754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14
> 15) *0, disabled.
> [ 0.780907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14
> 15) *0, disabled.
> [ 0.781185] ACPI: WMI: Mapper loaded
> [ 0.781229] SCSI subsystem initialized
> [ 0.781229] libata version 3.00 loaded.
> [ 0.781229] usbcore: registered new interface driver usbfs
> [ 0.781229] usbcore: registered new interface driver hub
> [ 0.781229] usbcore: registered new device driver usb
> [ 0.781229] PCI: Using ACPI for IRQ routing
> [ 0.784014] Bluetooth: Core ver 2.13
> [ 0.784023] NET: Registered protocol family 31
> [ 0.784023] Bluetooth: HCI device and connection manager initialized
> [ 0.784023] Bluetooth: HCI socket layer initialized
> [ 0.784023] NET: Registered protocol family 8
> [ 0.784023] NET: Registered protocol family 20
> [ 0.784031] NetLabel: Initializing
> [ 0.784033] NetLabel: domain hash size = 128
> [ 0.784035] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.784048] NetLabel: unlabeled traffic allowed by default
> [ 0.784098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 2303, 0
> [ 0.784103] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
> [ 0.788050] hpet: hpet2 irq 2303 for MSI
> [ 0.788087] AppArmor: AppArmor Filesystem Enabled
> [ 0.792029] Switched to high resolution mode on CPU 0
> [ 0.792301] Switched to high resolution mode on CPU 1
> [ 0.792310] pnp: PnP ACPI init
> [ 0.792318] ACPI: bus type pnp registered
> [ 0.797374] pnp: PnP ACPI: found 12 devices
> [ 0.797376] ACPI: ACPI bus type pnp unregistered
> [ 0.797379] PnPBIOS: Disabled by ACPI PNP
> [ 0.797389] system 00:01: iomem range 0xfec00000-0xfec00fff has been
> reserved
> [ 0.797392] system 00:01: iomem range 0xfee00000-0xfee00fff has been
> reserved
> [ 0.797401] system 00:09: ioport range 0x400-0x4cf has been reserved
> [ 0.797404] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.797407] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
> [ 0.797409] system 00:09: ioport range 0x680-0x6ff has been reserved
> [ 0.797412] system 00:09: ioport range 0x77a-0x77a has been reserved
> [ 0.797415] system 00:09: ioport range 0xc00-0xc01 has been reserved
> [ 0.797417] system 00:09: ioport range 0xc14-0xc14 has been reserved
> [ 0.797420] system 00:09: ioport range 0xc50-0xc52 has been reserved
> [ 0.797423] system 00:09: ioport range 0xc6c-0xc6c has been reserved
> [ 0.797425] system 00:09: ioport range 0xc6f-0xc6f has been reserved
> [ 0.797428] system 00:09: ioport range 0xcd0-0xcdb has been reserved
> [ 0.797434] system 00:0a: iomem range 0xe0000-0xfffff could not be
> reserved
> [ 0.797437] system 00:0a: iomem range 0xfff00000-0xffffffff has been
> reserved
> [ 0.832402] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> [ 0.832406] pci 0000:00:01.0: IO window: 0x5000-0x5fff
> [ 0.832410] pci 0000:00:01.0: MEM window: 0xd2200000-0xd23fffff
> [ 0.832414] pci 0000:00:01.0: PREFETCH window:
> 0x000000c0000000-0x000000cfffffff
> [ 0.832419] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
> [ 0.832422] pci 0000:00:04.0: IO window: 0x3000-0x4fff
> [ 0.832426] pci 0000:00:04.0: MEM window: 0xd1200000-0xd21fffff
> [ 0.832429] pci 0000:00:04.0: PREFETCH window:
> 0x000000d0000000-0x000000d0ffffff
> [ 0.832434] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
> [ 0.832436] pci 0000:00:05.0: IO window: disabled
> [ 0.832440] pci 0000:00:05.0: MEM window: 0xd1100000-0xd11fffff
> [ 0.832443] pci 0000:00:05.0: PREFETCH window: disabled
> [ 0.832449] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
> [ 0.832452] pci 0000:00:06.0: IO window: 0x2000-0x2fff
> [ 0.832456] pci 0000:00:06.0: MEM window: 0xb0000000-0xb00fffff
> [ 0.832459] pci 0000:00:06.0: PREFETCH window:
> 0x000000d1000000-0x000000d10fffff
> [ 0.832464] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
> [ 0.832482] pci 0000:00:14.4: IO window: 0x1000-0x1fff
> [ 0.832488] pci 0000:00:14.4: MEM window: disabled
> [ 0.832492] pci 0000:00:14.4: PREFETCH window: disabled
> [ 0.832523] pci 0000:00:01.0: setting latency timer to 64
> [ 0.832533] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.832537] pci 0000:00:04.0: setting latency timer to 64
> [ 0.832543] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.832547] pci 0000:00:05.0: setting latency timer to 64
> [ 0.832554] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 0.832558] pci 0000:00:06.0: setting latency timer to 64
> [ 0.832566] bus: 00 index 0 io port: [0x00-0xffff]
> [ 0.832569] bus: 00 index 1 mmio: [0x000000-0xffffffff]
> [ 0.832571] bus: 01 index 0 io port: [0x5000-0x5fff]
> [ 0.832573] bus: 01 index 1 mmio: [0xd2200000-0xd23fffff]
> [ 0.832575] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff]
> [ 0.832577] bus: 01 index 3 mmio: [0x0-0x0]
> [ 0.832579] bus: 02 index 0 io port: [0x3000-0x4fff]
> [ 0.832582] bus: 02 index 1 mmio: [0xd1200000-0xd21fffff]
> [ 0.832584] bus: 02 index 2 mmio: [0xd0000000-0xd0ffffff]
> [ 0.832586] bus: 02 index 3 mmio: [0x0-0x0]
> [ 0.832588] bus: 08 index 0 mmio: [0x0-0x0]
> [ 0.832590] bus: 08 index 1 mmio: [0xd1100000-0xd11fffff]
> [ 0.832592] bus: 08 index 2 mmio: [0x0-0x0]
> [ 0.832593] bus: 08 index 3 mmio: [0x0-0x0]
> [ 0.832595] bus: 09 index 0 io port: [0x2000-0x2fff]
> [ 0.832597] bus: 09 index 1 mmio: [0xb0000000-0xb00fffff]
> [ 0.832600] bus: 09 index 2 mmio: [0xd1000000-0xd10fffff]
> [ 0.832602] bus: 09 index 3 mmio: [0x0-0x0]
> [ 0.832604] bus: 80 index 0 io port: [0x1000-0x1fff]
> [ 0.832606] bus: 80 index 1 mmio: [0x0-0x0]
> [ 0.832607] bus: 80 index 2 mmio: [0x0-0x0]
> [ 0.832609] bus: 80 index 3 io port: [0x00-0xffff]
> [ 0.832611] bus: 80 index 4 mmio: [0x000000-0xffffffff]
> [ 0.832623] NET: Registered protocol family 2
> [ 0.844580] IP route cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [ 0.844855] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.845456] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.845729] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.845731] TCP reno registered
> [ 0.848617] NET: Registered protocol family 1
> [ 0.848742] checking if image is initramfs... it is
> [ 1.500565] Clocksource tsc unstable (delta = -98443657 ns)
> [ 1.698502] Freeing initrd memory: 7368k freed
> [ 1.698576] Simple Boot Flag at 0x44 set to 0x1
> [ 1.698857] cpufreq: No nForce2 chipset.
> [ 1.698984] audit: initializing netlink socket (disabled)
> [ 1.698998] type=2000 audit(1244218695.696:1): initialized
> [ 1.707061] highmem bounce pool size: 64 pages
> [ 1.707067] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 1.708283] VFS: Disk quotas dquot_6.5.1
> [ 1.708335] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 1.709008] fuse init (API version 7.10)
> [ 1.709089] msgmni has been set to 1678
> [ 1.709342] alg: No test for stdrng (krng)
> [ 1.709359] io scheduler noop registered
> [ 1.709362] io scheduler anticipatory registered
> [ 1.709364] io scheduler deadline registered
> [ 1.709380] io scheduler cfq registered (default)
> [ 1.896104] pci 0000:01:05.0: Boot video device
> [ 1.896322] _OSC request fails
> [ 1.899721] _OSC request fails
> [ 1.902415] pcieport-driver 0000:00:04.0: setting latency timer to 64
> [ 1.902449] pcieport-driver 0000:00:04.0: found MSI capability
> [ 1.902475] pcieport-driver 0000:00:04.0: irq 2302 for MSI/MSI-X
> [ 1.902486] pci_express 0000:00:04.0:pcie00: allocate port service
> [ 1.902505] pci_express 0000:00:04.0:pcie02: allocate port service
> [ 1.902516] pci_express 0000:00:04.0:pcie03: allocate port service
> [ 1.902565] pcieport-driver 0000:00:05.0: setting latency timer to 64
> [ 1.902595] pcieport-driver 0000:00:05.0: found MSI capability
> [ 1.902616] pcieport-driver 0000:00:05.0: irq 2301 for MSI/MSI-X
> [ 1.902626] pci_express 0000:00:05.0:pcie00: allocate port service
> [ 1.902638] pci_express 0000:00:05.0:pcie03: allocate port service
> [ 1.902683] pcieport-driver 0000:00:06.0: setting latency timer to 64
> [ 1.902713] pcieport-driver 0000:00:06.0: found MSI capability
> [ 1.902734] pcieport-driver 0000:00:06.0: irq 2300 for MSI/MSI-X
> [ 1.902744] pci_express 0000:00:06.0:pcie00: allocate port service
> [ 1.902756] pci_express 0000:00:06.0:pcie03: allocate port service
> [ 1.902814] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.902901] _OSC request fails
> [ 1.902932] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 1.904621] ACPI: AC Adapter [ACAD] (on-line)
> [ 1.985146] ACPI: Battery Slot [BAT0] (battery present)
> [ 1.985246] input: Power Button (FF) as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 1.985249] ACPI: Power Button (FF) [PWRF]
> [ 1.985288] input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 1.985291] ACPI: Power Button (CM) [PWRB]
> [ 1.985340] input: Sleep Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> [ 1.985342] ACPI: Sleep Button (CM) [SLPB]
> [ 1.985391] input: Lid Switch as
> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
> [ 1.986405] ACPI: Lid Switch [LID]
> [ 1.986748] processor ACPI_CPU:00: registered as cooling_device0
> [ 1.986758] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 1.986839] processor ACPI_CPU:01: registered as cooling_device1
> [ 1.996310] ACPI Exception (thermal-0377): AE_OK, No or invalid critical
> threshold [20080926]
> [ 1.996380] isapnp: Scanning for PnP cards...
> [ 2.381033] isapnp: No Plug & Play device found
> [ 2.392872] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> [ 2.393864] brd: module loaded
> [ 2.394176] loop: module loaded
> [ 2.394243] Fixed MDIO Bus: probed
> [ 2.394249] PPP generic driver version 2.4.2
> [ 2.394308] input: Macintosh mouse button emulation as
> /devices/virtual/input/input4
> [ 2.394337] Driver 'sd' needs updating - please use bus_type methods
> [ 2.394346] Driver 'sr' needs updating - please use bus_type methods
> [ 2.394383] ahci 0000:00:11.0: version 3.0
> [ 2.394438] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ
> 22
> [ 2.394633] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps
> 0x3f impl SATA mode
> [ 2.394636] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp
> pio
> [ 2.395538] scsi0 : ahci
> [ 2.395755] scsi1 : ahci
> [ 2.395974] scsi2 : ahci
> [ 2.396191] scsi3 : ahci
> [ 2.396413] scsi4 : ahci
> [ 2.396665] scsi5 : ahci
> [ 2.396706] ata1: SATA max UDMA/133 abar m1024 en 0xd2409000 port
> 0xd2409100 irq 22
> [ 2.396710] ata2: SATA max UDMA/133 abar m1024 en 0xd2409000 port
> 0xd2409180 irq 22
> [ 2.396713] ata3: SATA max UDMA/133 abar m1024 en 0xd2409000 port
> 0xd2409200 irq 22
> [ 2.396717] ata4: SATA max UDMA/133 abar m1024 en 0xd2409000 port
> 0xd2409280 irq 22
> [ 2.396721] ata5: SATA max UDMA/133 abar m1024 en 0xd2409000 port
> 0xd2409300 irq 22
> [ 2.396724] ata6: SATA max UDMA/133 abar m1024 en 0xd2409000 port
> 0xd2409380 irq 22
> [ 2.880366] ata1: softreset failed (device not ready)
> [ 2.880406] ata1: failed due to HW bug, retry pmp=0
> [ 3.044378] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 3.085115] ata1.00: ATA-8: WDC WD3200BEKT-00F3T0, 11.01A11, max
> UDMA/133
> [ 3.085118] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth
> 31/32)
> [ 3.087781] ata1.00: configured for UDMA/133
> [ 3.568366] ata2: softreset failed (device not ready)
> [ 3.568403] ata2: failed due to HW bug, retry pmp=0
> [ 3.732378] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 3.746688] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100
> [ 3.760421] ata2.00: configured for UDMA/100
> [ 4.080091] ata3: SATA link down (SStatus 0 SControl 300)
> [ 4.400090] ata4: SATA link down (SStatus 0 SControl 300)
> [ 4.720091] ata5: SATA link down (SStatus 0 SControl 300)
> [ 5.040091] ata6: SATA link down (SStatus 0 SControl 300)
> [ 5.040199] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-0
> 11.0 PQ: 0 ANSI: 5
> [ 5.040289] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320
> GB/298 GiB)
> [ 5.040306] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.040309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.040334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 5.040411] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320
> GB/298 GiB)
> [ 5.040426] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.040428] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.040452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 5.040456] sda: sda1 sda2 < sda5 >
> [ 5.091418] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 5.091466] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 5.093695] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L
> 0400 PQ: 0 ANSI: 5
> [ 5.101618] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
> cdda tray
> [ 5.101621] Uniform CD-ROM driver Revision: 3.20
> [ 5.101716] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 5.101750] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 5.102060] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 5.102144] pata_atiixp 0000:00:14.1: setting latency timer to 64
> [ 5.102262] scsi6 : pata_atiixp
> [ 5.102487] scsi7 : pata_atiixp
> [ 5.103206] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq
> 14
> [ 5.103209] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq
> 15
> [ 5.103274] ata7: port disabled. ignoring.
> [ 5.256895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 5.256948] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) ->
> IRQ 17
> [ 5.256970] ehci_hcd 0000:00:12.2: setting latency timer to 64
> [ 5.256973] ehci_hcd 0000:00:12.2: EHCI Host Controller
> [ 5.257030] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
> number 1
> [ 5.257090] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
> workaround
> [ 5.257110] ehci_hcd 0000:00:12.2: debug port 1
> [ 5.257129] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2409500
> [ 5.268076] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
> [ 5.268153] usb usb1: configuration #1 chosen from 1 choice
> [ 5.268180] hub 1-0:1.0: USB hub found
> [ 5.268188] hub 1-0:1.0: 6 ports detected
> [ 5.268369] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) ->
> IRQ 19
> [ 5.268382] ehci_hcd 0000:00:13.2: setting latency timer to 64
> [ 5.268385] ehci_hcd 0000:00:13.2: EHCI Host Controller
> [ 5.268428] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
> number 2
> [ 5.268486] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
> workaround
> [ 5.268518] ehci_hcd 0000:00:13.2: debug port 1
> [ 5.268536] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2409400
> [ 5.280077] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
> [ 5.280136] usb usb2: configuration #1 chosen from 1 choice
> [ 5.280158] hub 2-0:1.0: USB hub found
> [ 5.280165] hub 2-0:1.0: 6 ports detected
> [ 5.280291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 5.280341] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 5.280352] ohci_hcd 0000:00:12.0: setting latency timer to 64
> [ 5.280356] ohci_hcd 0000:00:12.0: OHCI Host Controller
> [ 5.280395] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
> number 3
> [ 5.280457] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2408000
> [ 5.340197] usb usb3: configuration #1 chosen from 1 choice
> [ 5.340221] hub 3-0:1.0: USB hub found
> [ 5.340230] hub 3-0:1.0: 3 ports detected
> [ 5.340343] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 5.340355] ohci_hcd 0000:00:12.1: setting latency timer to 64
> [ 5.340358] ohci_hcd 0000:00:12.1: OHCI Host Controller
> [ 5.340399] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus
> number 4
> [ 5.340452] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2407000
> [ 5.396107] usb usb4: configuration #1 chosen from 1 choice
> [ 5.396129] hub 4-0:1.0: USB hub found
> [ 5.396172] hub 4-0:1.0: 3 ports detected
> [ 5.396291] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 5.396302] ohci_hcd 0000:00:13.0: setting latency timer to 64
> [ 5.396306] ohci_hcd 0000:00:13.0: OHCI Host Controller
> [ 5.396348] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
> number 5
> [ 5.396406] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2406000
> [ 5.452102] usb usb5: configuration #1 chosen from 1 choice
> [ 5.452124] hub 5-0:1.0: USB hub found
> [ 5.452167] hub 5-0:1.0: 3 ports detected
> [ 5.452287] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [ 5.452299] ohci_hcd 0000:00:13.1: setting latency timer to 64
> [ 5.452303] ohci_hcd 0000:00:13.1: OHCI Host Controller
> [ 5.452349] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
> number 6
> [ 5.452397] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2405000
> [ 5.508104] usb usb6: configuration #1 chosen from 1 choice
> [ 5.508127] hub 6-0:1.0: USB hub found
> [ 5.508171] hub 6-0:1.0: 3 ports detected
> [ 5.508286] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) ->
> IRQ 18
> [ 5.508297] ohci_hcd 0000:00:14.5: setting latency timer to 64
> [ 5.508301] ohci_hcd 0000:00:14.5: OHCI Host Controller
> [ 5.508341] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus
> number 7
> [ 5.508395] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd2404000
> [ 5.564102] usb usb7: configuration #1 chosen from 1 choice
> [ 5.564125] hub 7-0:1.0: USB hub found
> [ 5.564168] hub 7-0:1.0: 2 ports detected
> [ 5.564283] uhci_hcd: USB Universal Host Controller Interface driver
> [ 5.564365] usbcore: registered new interface driver libusual
> [ 5.564396] usbcore: registered new interface driver usbserial
> [ 5.564406] USB Serial support registered for generic
> [ 5.580071] usb 1-4: new high speed USB device using ehci_hcd and
> address 2
> [ 5.962689] usb 1-4: configuration #1 chosen from 1 choice
> [ 6.132103] usb 2-2: new high speed USB device using ehci_hcd and
> address 3
> [ 6.299031] usb 2-2: configuration #1 chosen from 1 choice
> [ 6.676164] usb 5-1: new low speed USB device using ohci_hcd and address
> 2
> [ 6.846717] usb 5-1: configuration #1 chosen from 1 choice
> [ 7.116058] usb 6-1: new full speed USB device using ohci_hcd and
> address 2
> [ 7.298103] usb 6-1: configuration #1 chosen from 1 choice
> [ 7.436163] usb 7-1: new full speed USB device using ohci_hcd and
> address 2
> [ 7.601070] usb 7-1: configuration #1 chosen from 1 choice
> [ 7.736164] usb 7-2: new full speed USB device using ohci_hcd and
> address 3
> [ 7.903052] usb 7-2: configuration #1 chosen from 1 choice
> [ 7.905252] usbcore: registered new interface driver usbserial_generic
> [ 7.905254] usbserial: USB Serial Driver core
> [ 7.905297] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
> 0x60,0x64 irq 1,12
> [ 7.926866] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 7.926873] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 7.928583] mice: PS/2 mouse device common for all mice
> [ 7.948616] rtc_cmos 00:05: RTC can wake from S4
> [ 7.948651] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> [ 7.948681] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
> [ 7.948753] device-mapper: uevent: version 1.0.3
> [ 7.948924] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
> dm-devel en redhat.com
> [ 7.949289] device-mapper: multipath: version 1.0.5 loaded
> [ 7.949292] device-mapper: multipath round-robin: version 1.0.0 loaded
> [ 7.949576] EISA: Probing bus 0 at eisa.0
> [ 7.949585] Cannot allocate resource for EISA slot 1
> [ 7.949587] Cannot allocate resource for EISA slot 2
> [ 7.949589] Cannot allocate resource for EISA slot 3
> [ 7.949591] Cannot allocate resource for EISA slot 4
> [ 7.949593] Cannot allocate resource for EISA slot 5
> [ 7.949595] Cannot allocate resource for EISA slot 6
> [ 7.949606] EISA: Detected 0 cards.
> [ 7.949790] cpuidle: using governor ladder
> [ 7.949792] cpuidle: using governor menu
> [ 7.950286] TCP cubic registered
> [ 7.950381] NET: Registered protocol family 10
> [ 7.950794] lo: Disabled Privacy Extensions
> [ 7.951093] NET: Registered protocol family 17
> [ 7.951110] Bluetooth: L2CAP ver 2.11
> [ 7.951112] Bluetooth: L2CAP socket layer initialized
> [ 7.951115] Bluetooth: SCO (Voice Link) ver 0.6
> [ 7.951117] Bluetooth: SCO socket layer initialized
> [ 7.951216] Bluetooth: RFCOMM socket layer initialized
> [ 7.951223] Bluetooth: RFCOMM TTY layer initialized
> [ 7.951225] Bluetooth: RFCOMM ver 1.10
> [ 7.951287] powernow-k8: Found 1 AMD Turion(tm) X2 Dual-Core Mobile
> RM-70 processors (2 cpu cores) (version 2.20.00)
> [ 7.951367] powernow-k8: 0 : pstate 0 (2000 MHz)
> [ 7.951373] powernow-k8: 1 : pstate 1 (1000 MHz)
> [ 7.951377] powernow-k8: 2 : pstate 2 (500 MHz)
> [ 7.952732] Using IPI No-Shortcut mode
> [ 7.952814] registered taskstats version 1
> [ 7.952971] Magic number: 13:342:337
> [ 7.953009] tty tty58: hash matches
> [ 7.953121] rtc_cmos 00:05: setting system clock to 2009-06-05 16:18:23
> UTC (1244218703)
> [ 7.953124] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 7.953126] EDD information not available.
> [ 7.953549] Freeing unused kernel memory: 532k freed
> [ 7.953805] Write protecting the kernel text: 4128k
> [ 7.953897] Write protecting the kernel read-only data: 1532k
> [ 7.977402] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input5
> [ 8.224579] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 8.224601] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
> 18
> [ 8.224620] r8169 0000:09:00.0: setting latency timer to 64
> [ 8.224715] r8169 0000:09:00.0: irq 2299 for MSI/MSI-X
> [ 8.225314] eth0: RTL8168c/8111c at 0xf7c78000, 00:1e:68:e6:ed:b0, XID
> 3c4000c0 IRQ 2299
> [ 8.291821] usbcore: registered new interface driver hiddev
> [ 8.295910] input: Microsoft Microsoft 3-Button Mouse with IntelliEye?
> as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input6
> [ 8.316255] generic-usb 0003:045E:007D.0001: input,hidraw0: USB HID
> v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on
> usb-0000:00:13.0-1/input0
> [ 8.316319] usbcore: registered new interface driver usbhid
> [ 8.316323] usbhid: v2.6:USB HID core driver
> [ 8.527085] PM: Starting manual resume from disk
> [ 8.527089] PM: Resume from partition 8:5
> [ 8.527091] PM: Checking hibernation image.
> [ 8.527279] PM: Resume from disk failed.
> [ 8.575331] kjournald starting. Commit interval 5 seconds
> [ 8.575344] EXT3-fs: mounted filesystem with ordered data mode.
> [ 13.920050] udev: starting version 141
> [ 14.039446] ieee80211_crypt: registered algorithm 'NULL'
> [ 14.044005] wl: module license '' taints kernel.
> [ 14.046206] wl 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 14.046216] wl 0000:08:00.0: setting latency timer to 64
> [ 14.069406] ieee80211_crypt: registered algorithm 'TKIP'
> [ 14.070757] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.79.10
> [ 14.087924] acpi device:05: registered as cooling_device2
> [ 14.088294] input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
> [ 14.098592] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602
> ss_vid 0 ss_did 0
> [ 14.098597] shpchp 0000:00:01.0: Cannot reserve MMIO region
> [ 14.098672] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 14.112725] ACPI: Video Device [VGA] (multi-head: yes rom: no post:
> no)
> [ 14.128649] Linux agpgart interface v0.103
> [ 14.140104] Bluetooth: Generic Bluetooth USB driver ver 0.3
> [ 14.140251] usbcore: registered new interface driver btusb
> [ 14.234151] [fglrx] Maximum main memory to use for locked dma buffers:
> 2628 MBytes.
> [ 14.234180] [fglrx] vendor: 1002 device: 9612 count: 1
> [ 14.234465] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
> [ 14.234485] pci 0000:01:05.0: power state changed by ACPI to D0
> [ 14.234496] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 14.234502] pci 0000:01:05.0: setting latency timer to 64
> [ 14.235174] [fglrx] Driver built-in PAT support is enabled successfully
> [ 14.235277] [fglrx] module loaded - fglrx 8.60.40 [Mar 14 2009] with 1
> minors
> [ 14.261906] input: PC Speaker as /devices/platform/pcspkr/input/input8
> [ 14.296881] input: Wacom ISDv4 93 as
> /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input9
> [ 14.325800] input: Wacom ISDv4 93 as
> /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input10
> [ 14.348695] usbcore: registered new interface driver wacom
> [ 14.348754] wacom: v1.49-pc-1:USB Wacom Graphire and Wacom Intuos tablet
> driver
> [ 14.361795] Linux video capture interface: v2.00
> [ 14.362831] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
> revision 0
> [ 14.405773] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a104)
> [ 14.408104] input: HP Webcam as
> /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11
> [ 14.417318] usbcore: registered new interface driver uvcvideo
> [ 14.417377] USB Video Class driver (v0.1.0)
> [ 14.450678] synaptics was reset on resume, see synaptics_resume_reset if
> you have trouble on resume
> [ 14.613970] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 14.614224] HDA Intel 0000:00:14.2: setting latency timer to 64
> [ 15.006649] lp: driver loaded but no devices found
> [ 15.140880] Adding 8305564k swap on /dev/sda5. Priority:-1 extents:1
> across:8305564k
> [ 15.475735] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps:
> 0xa04711/0xa00000
> [ 15.544619] input: SynPS/2 Synaptics TouchPad as
> /devices/platform/i8042/serio1/input/input12
> [ 15.683929] EXT3 FS on sda1, internal journal
> [ 16.791403] type=1505 audit(1244218712.334:2): operation="profile_load"
> name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2298
> [ 16.844876] type=1505 audit(1244218712.390:3): operation="profile_load"
> name="/sbin/dhclient-script" name2="default" pid=2302
> [ 16.845024] type=1505 audit(1244218712.390:4): operation="profile_load"
> name="/sbin/dhclient3" name2="default" pid=2302
> [ 16.845076] type=1505 audit(1244218712.390:5): operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default"
> pid=2302
> [ 16.845123] type=1505 audit(1244218712.390:6): operation="profile_load"
> name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2302
> [ 16.998528] type=1505 audit(1244218712.543:7): operation="profile_load"
> name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2307
> [ 16.998733] type=1505 audit(1244218712.543:8): operation="profile_load"
> name="/usr/sbin/cupsd" name2="default" pid=2307
> [ 17.030143] type=1505 audit(1244218712.575:9): operation="profile_load"
> name="/usr/sbin/tcpdump" name2="default" pid=2311
> [ 22.226575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 22.226579] Bluetooth: BNEP filters: protocol multicast
> [ 22.239170] Bridge firewalling registered
> [ 23.908544] ppdev: user-space parallel port driver
> [ 26.114077] [fglrx] GART Table is not in FRAME_BUFFER range
> [ 26.119235] fglrx_pci 0000:01:05.0: irq 2298 for MSI/MSI-X
> [ 26.130891] [fglrx] Firegl kernel thread PID: 3395
> [ 26.141884] APIC error on CPU0: 00(08)
> [ 26.141889] APIC error on CPU1: 00(08)
> [ 26.167126] [fglrx] Gart USWC size:1320 M.
> [ 26.167130] [fglrx] Gart cacheable size:60 M.
> [ 26.167137] [fglrx] Reserved FB block: Shared offset:0, size:1000000
> [ 26.167141] [fglrx] Reserved FB block: Unshared offset:13ffb000,
> size:5000
> [ 27.456438] r8169: eth0: link down
> [ 27.456661] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 32.304036] eth1: no IPv6 routers present
> [ 47.980824] CPU0 attaching NULL sched-domain.
> [ 47.980832] CPU1 attaching NULL sched-domain.
> [ 47.981648] CPU0 attaching sched-domain:
> [ 47.981651] domain 0: span 0-1 level CPU
> [ 47.981654] groups: 0 1
> [ 47.981660] CPU1 attaching sched-domain:
> [ 47.981662] domain 0: span 0-1 level CPU
> [ 47.981664] groups: 1 0
>
>
>>
>> --
>> Marco Antonio de Hoyos
>> 15-5157-2322 // 4268-1557
>> Claypole - Pcia. de Bs. As.- Argentina
>> ICQ#92702911 / jabber: mhoyos en jabber.org
>> ----------------------------------------------------------
>> http://tecnicoslinux.com.ar |-| http://trekkingfotos.com.ar
>>
>> --
>> Ubuntu-ar lista de correo
>> Ubuntu-ar en lists.ubuntu.com
>> Modifica tus opciones o desuscribite en:
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ar
>> Siempre leer, comprender y aplicar nuestra etiqueta:
>> https://wiki.ubuntu.com/ArgentinaTeam/EtiquetaML
>>
>>
> Marco,
Investigando en el link que me enviaste, al tirar /sudo modprobe
usb_storage/, en unos segundos detecta la tarjeta al tenerla puesta, y
funciona de maravillas, pero como puedo hacer para que me la detecté
automaticamente sin tener que tirar comandos. Estoy mas que conforme, que
ahora por lo menos con la terminal tengo el asunto solucionado.
AgustÃn
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-ar/attachments/20090605/77003d5d/attachment-0001.htm
More information about the Ubuntu-ar
mailing list