[Bug 1958834] Re: jammy/linux-raspi: 5.15.0-1002.2 -proposed tracker
Launchpad Bug Tracker
1958834 at bugs.launchpad.net
Wed Feb 2 18:39:14 UTC 2022
This bug was fixed in the package linux-raspi - 5.15.0-1002.2
---------------
linux-raspi (5.15.0-1002.2) jammy; urgency=medium
* jammy/linux-raspi: 5.15.0-1002.2 -proposed tracker (LP: #1958834)
* Packaging resync (LP: #1786013)
- [Packaging] update Ubuntu.md
- debian/dkms-versions -- update from kernel-versions (main/master)
* Kernel fails to boot in ScalingStack (LP: #1959102)
- [Config] raspi: Set VIRTIO_PCI=m
- [Config] raspi: Set ACPI=y
* jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-24)
(LP: #1958854)
- brcmfmac: firmware: Fix crash in brcm_alt_fw_path
- ARM: dts: Remove VL805 USB node from CM4 dts
- mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
- pwm: raspberrypi-poe: Add option of being created by MFD or FW
- power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
- power: rpi-poe: Add option of being created by MFD or FW
- defconfigs: Add MFD_RASPBERRYPI_POE_HAT to Pi defconfigs.
- dtoverlays: Add option for PoE HAT to use Linux I2C instead of FW.
- drivers: bcm2835_unicam: Disable trigger mode operation
- arm: Remove spurious .fnend directive
- drm/vc4: Fix deadlock on DSI device attach error
- drm/vc4: dsi: Correct max divider to 255 (not 7)
- defconfig: Add BACKLIGHT_PWM to bcm2709 and bcmrpi defconfigs
- dtoverlays: Add pwm backlight option to vc4-kms-dpi-generic
- dtoverlays: Correct [h|v]sync_invert config in vc4-kms-dpi-generic
- ARM: dts: BCM2711 AON_INTR2 generates IRQ edges
- update rpi-display-overlay.dts pins for 5.10+
[ Ubuntu: 5.15.0-18.18 ]
* jammy/linux: 5.15.0-18.18 -proposed tracker (LP: #1958638)
* CVE-2021-4155
- xfs: map unwritten blocks in XFS_IOC_{ALLOC, FREE}SP just like fallocate
* CVE-2022-0185
- SAUCE: vfs: test that one given mount param is not larger than PAGE_SIZE
* [UBUNTU 20.04] KVM hardware diagnose data improvements for guest kernel -
kernel part (LP: #1953334)
- KVM: s390: add debug statement for diag 318 CPNC data
* OOB write on BPF_RINGBUF (LP: #1956585)
- SAUCE: bpf: prevent helper argument PTR_TO_ALLOC_MEM to have offset other
than 0
* Miscellaneous Ubuntu changes
- [Config] re-enable shiftfs
- [SAUCE] shiftfs: support kernel 5.15
- [Config] update toolchain versions
* Miscellaneous upstream changes
- vfs: fs_context: fix up param length parsing in legacy_parse_param
linux-raspi (5.15.0-1001.1) jammy; urgency=medium
* Missing overlays/README (LP: #1954757)
- SAUCE: Install overlays/README
* dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454)
- SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart2-5
* jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-14)
(LP: #1958146)
- clk: bcm-2835: Pick the closest clock rate
- clk: bcm-2835: Remove rounding up the dividers
- drm/vc4: hdmi: Set a default HSM rate
- drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
- drm/vc4: hdmi: Make sure the controller is powered in detect
- drm/vc4: hdmi: Make sure the controller is powered up during bind
- drm/vc4: hdmi: Rework the pre_crtc_configure error handling
- drm/vc4: hdmi: Split the CEC disable / enable functions in two
- drm/vc4: hdmi: Make sure the device is powered with CEC
- drm/vc4: hdmi: Warn if we access the controller while disabled
- drm/vc4: crtc: Make sure the HDMI controller is powered when disabling
- drm/vc4: crtc: Drop feed_txp from state
- drm/vc4: Fix non-blocking commit getting stuck forever
- drm/vc4: crtc: Copy assigned channel to the CRTC
- drm/vc4: hdmi: Add a spinlock to protect register access
- drm/vc4: hdmi: Use a mutex to prevent concurrent framework access
- drm/vc4: hdmi: Prevent access to crtc->state outside of KMS
- drm/vc4: hdmi: Check the device state in prepare()
- drm/vc4: hdmi: Introduce an output_enabled flag
- drm/vc4: hdmi: Introduce a scdc_enabled flag
- drm/vc4: hdmi: Remove the DDC probing for status detection
- drm/vc4: hdmi: Fix HPD GPIO detection
- drm/vc4: Make vc4_crtc_get_encoder public
- drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
- drm/vc4: crtc: Rework the encoder retrieval code (again)
- drm/vc4: crtc: Add some logging
- drm/vc4: Leverage the load tracker on the BCM2711
- drm/vc4: hdmi: Raise the maximum clock rate
- drm/vc4: hdmi: Enable the scrambler on reconnection
- drm/vc4: Increase the core clock based on HVS load
- drm/vc4: select PM
- drm/probe-helper: Create a HPD IRQ event helper for a single connector
- drm/vc4: hdmi: Actually check for the connector status in hotplug
- firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE
- drm/vc4: Remove conflicting framebuffers before callind bind_all
- drm/vc4: Notify the firmware when DRM is in charge
- arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65
- Revert "rtc: pcf8523: properly handle oscillator stop bit"
- Revert "staging: bcm2835-audio: Drop DT dependency"
- Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"
- Revert "mailbox: avoid timer start from callback"
- Revert "Bluetooth: Always request for user confirmation for Just Works (LE
SC)"
- Revert "Bluetooth: Always request for user confirmation for Just Works"
- smsx95xx: fix crimes against truesize
- smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
- Allow mac address to be set in smsc95xx
- cgroup: Disable cgroup "memory" by default
- Protect __release_resource against resources without parents
- irq-bcm2836: Avoid "Invalid trigger warning"
- irqchip: bcm2835: Add FIQ support
- irqchip: irq-bcm2835: Add 2836 FIQ support
- spi: spidev: Completely disable the spidev warning
- dmaengine: bcm2835: Load driver early and support legacy API
- rtc: Add SPI alias for pcf2123 driver
- watchdog: bcm2835: Support setting reboot partition
- reboot: Use power off rather than busy spinning when halt is requested
- bcm: Make RASPBERRYPI_POWER depend on PM
- Register the clocks early during the boot process, so that special/critical
clocks can get enabled early on in the boot process avoiding the risk of
disabling a clock, pll_divider or pll when a claiming driver fails to
install propperly - maybe it needs to defer.
- bcm2835-rng: Avoid initialising if already enabled
- clk-bcm2835: Mark used PLLs and dividers CRITICAL
- clk-bcm2835: Add claim-clocks property
- clk-bcm2835: Read max core clock from firmware
- sound: Demote deferral errors to INFO level
- Update vfpmodule.c
- i2c: bcm2835: Add debug support
- irqchip: irq-bcm2836: Remove regmap and syscon use
- lan78xx: Enable LEDs and auto-negotiation
- amba_pl011: Don't use DT aliases for numbering
- amba_pl011: Round input clock up
- amba_pl011: Insert mb() for correct FIFO handling
- amba_pl011: Add cts-event-workaround DT property
- tty: amba-pl011: Add un/throttle support
- tty: amba-pl011: Avoid rare write-when-full error
- pinctrl-bcm2835: Set base to 0 give expected gpio numbering
- Main bcm2708/bcm2709 linux port
- Add dwc_otg driver
- bcm2708 framebuffer driver
- Pulled in the multi frame buffer support from the Pi3 repo
- fbdev: add FBIOCOPYAREA ioctl
- Speed up console framebuffer imageblit function
- dmaengine: Add support for BCM2708
- MMC: added alternative MMC driver
- Adding bcm2835-sdhost driver, and an overlay to enable it
- vc_mem: Add vc_mem driver for querying firmware memory addresses
- Add /dev/gpiomem device for rootless user GPIO access
- Add SMI driver
- Add Chris Boot's i2c driver
- char: broadcom: Add vcio module
- firmware: bcm2835: Support ARCH_BCM270x
- BCM2708: Add core Device Tree support
- leds: Add the "input" trigger, for pwr_led
- Added Device IDs for August DVB-T 205
- Improve __copy_to_user and __copy_from_user performance
- gpio-poweroff: Allow it to work on Raspberry Pi
- mfd: Add Raspberry Pi Sense HAT core driver
- Add support for all the downstream rpi sound card drivers
- rpi_display: add backlight driver and overlay
- bcm2835-virtgpio: Virtual GPIO driver
- OF: DT-Overlay configfs interface
- brcm: adds support for BCM43341 wifi
- hci_h5: Don't send conf_req when ACTIVE
- config: Add default configs
- ARM64: Round-Robin dispatch IRQs between CPUs.
- ARM64: Force hardware emulation of deprecated instructions.
- cache: export clean and invalidate
- AXI performance monitor driver (#2222)
- ARM: bcm2835: Set Serial number and Revision
- dwc-otg: FIQ: Fix "bad mode in data abort handler"
- ARM: Activate FIQs to avoid __irq_startup warnings
- i2c-gpio: Also set bus numbers from reg property
- added capture_clear option to pps-gpio via dtoverlay (#2433)
- lan78xx: Read initial EEE status from DT
- hid: Reduce default mouse polling interval to 60Hz
- Add ability to export gpio used by gpio-poweroff
- firmware/raspberrypi: Notify firmware of a reboot
- irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
- of: configfs: Use of_overlay_fdt_apply API call
- net: lan78xx: Disable TCP Segmentation Offload (TSO)
- brcmfmac: Re-enable firmware roaming support
- lan78xx: Move enabling of EEE into PHY init code
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
- firmware: raspberrypi: Add backward compatible get_throttled
- sc16is7xx: Don't spin if no data received
- drivers: thermal: step_wise: add support for hysteresis
- drivers: thermal: step_wise: avoid throttling at hysteresis temperature
after dropping below it
- Update issue templates (#2736)
- net: lan78xx: Support auto-downshift to 100Mb/s
- firmware: raspberrypi: Report the fw variant during probe
- lan78xx: Debounce link events to minimize poll storm
- lan78xx: EEE support is now a PHY property
- bcm2835-dma: Add support for per-channel flags
- rtc: rv3028: Add backup switchover mode support
- lan78xx: use default alignment for rx buffers
- media: tc358743: Increase FIFO level to 374.
- media: tc358743: fix connected/active CSI-2 lane reporting
- media: tc358743: Add support for 972Mbit/s link freq.
- media: tc358743: Check I2C succeeded during probe.
- media: adv7180: Default to the first valid input
- media: adv7180: Add YPrPb support for ADV7282M
- media: videodev2: Add helper defines for printing FOURCCs
- dt-bindings: Document BCM283x CSI2/CCP2 receiver
- MAINTAINERS: Add entry for BCM2835 Unicam driver
- media: tc358743: Return an appropriate colorspace from tc358743_set_fmt
- staging: mmal-vchiq: Avoid use of bool in structures
- staging: mmal-vchiq: Add support for event callbacks.
- staging: vc04_services: Support sending data to MMAL ports
- media: videobuf2: Allow exporting of a struct dmabuf
- staging: mmal-vchiq: Fix client_component for 64 bit kernel
- clk: clk-bcm2835: Use %zd when printing size_t
- staging: mmal_vchiq: Add in the Bayer encoding formats
- staging: mmal-vchiq: Update mmal_parameters.h with recently defined params
- staging: mmal-vchiq: Free the event context for control ports
- staging: mmal-vchiq: Fix memory leak in error path
- w1: w1-gpio: Make GPIO an output for strong pullup
- arm: bcm2835: Fix FIQ early ioremap
- arm: bcm2835: DMA can only address 1GB
- hwrng: iproc-rng200: Add BCM2838 support
- bcmgenet: constrain max DMA burst length
- bcmgenet: Better coalescing parameter defaults
- net: genet: enable link energy detect powerdown for external PHYs
- spi: bcm2835: enable shared interrupt support
- clk-bcm2835: Don't wait for pllh lock
- soc: bcm: bcm2835-pm: Add support for 2711.
- clk: bcm2835: Add support for setting leaf clock rates while running.
- clk: bcm2835: Allow reparenting leaf clocks while they're running.
- usb: add plumbing for updating interrupt endpoint interval state
- xhci: implement xhci_fixup_endpoint for interval adjustments
- usbhid: call usb_fixup_endpoint after mangling intervals
- arm: bcm2835: Add bcm2838 compatible string.
- drm/v3d: Add support for 2711.
- drm/v3d: Skip MMU flush if the device is currently off.
- drm/v3d: Hook up the runtime PM ops.
- i2c: bcm2835: Set clock-stretch timeout to 35ms
- clk-bcm2835: Avoid null pointer exception
- drm/v3d: HACK: gut runtime pm for now.
- drm/v3d: Clock V3D down when not in use.
- drivers: char: add chardev for mmap'ing the RPiVid control registers
- hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
- Add HDMI1 facility to the driver.
- net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
- xhci: Use more event ring segment table entries
- configs: arm64/bcm2711: Enable V3D
- arch/arm: Add model string to cpuinfo
- arch/arm64: Add Revision, Serial, Model to cpuinfo
- media: dt-bindings: Add binding for the Sony IMX219 sensor
- v4l2: Add a Greyworld AWB mode.
- staging: bcm2835-camera: Add greyworld AWB mode
- drm/v3d: Delete pm_runtime support
- ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible
- Rename HDMI ALSA device names, check for enable state
- dt-bindings: Add binding for the Infineon IRS1125 sensor
- media: i2c: Add a driver for the Infineon IRS1125 depth sensor
- drm/v3d: Suppress all but the first MMU error
- drm/v3d: Plug dma_fence leak
- staging: vchiq_arm: Register vcsm-cma as a platform driver
- staging: vchiq_arm: Register bcm2835-codec as a platform driver
- net:phy:2711 Allow ethernet LED mode to be set via device tree
- v3d_drv: Handle missing clock more gracefully
- v3d_gem: Kick the clock so firmware knows we are using firmware clock
interface
- clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks
- clk-bcm2835: Disable v3d clock
- staging: vchiq_arm: Set up dma ranges on child devices
- staging: vchiq: Use the old dma controller for OF config on platform devices
- ARM: bcm: Backport BCM2711 support from upstream
- Initialise rpi-firmware before clk-bcm2835
- staging: vchiq_arm: Give vchiq children DT nodes
- pinctrl: bcm2835: Remove gpiochip on error
- drivers: char: vcio: Use common compat header
- video: fbdev: bcm2708_fb: Use common compat header
- of: overlay: Correct symbol path fixups
- dt-bindings: pci: Add DT docs for Brcmstb PCIe device
- bcmgenet: Disable skip_umac_reset by default
- drm/fourcc: Add packed 10bit YUV 4:2:0 format
- media: uapi: hevc: Add scaling matrix control
- media: uapi: hevc: Add segment address field
- media: videodev2.h: Add a format for column YUV4:2:0 modes
- media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
- staging: media: Add Raspberry Pi V4L2 H265 decoder
- dt-bindings: clock: Add a binding for the RPi Firmware clocks
- dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
- drm: Checking of the pitch is only valid for linear formats
- driver: char: rpivid: Remove legacy name support
- spi: Force CS_HIGH if GPIO descriptors are used
- driver: char: rpivid: Don't map more than wanted
- media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
- media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type.
- media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format
- media: bcm2835-unicam: Add support for mulitple device nodes.
- media: bcm2835-unicam: Add embedded data node.
- media: bcm2835-unicam: Use dummy buffer if none have been queued
- media: bcm2835-unicam: Disable event-related ioctls on metadata node
- media: bcm2835-unicam: Add support for the FRAME_SYNC event
- media: bcm2835-unicam: Re-fetch mbus code from subdev on a g_fmt call
- media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type
- media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver
- staging: vchiq: Load bcm2835_isp driver from vchiq
- bcm2835-dma: Add proper 40-bit DMA support
- media: bcm2835-unicam: Add support for VIDIOC_[S|G]_SELECTION
- media: bcm2835-unicam: Do not stop streaming in unicam_release
- media: bcm2835-unicam: Fix reference counting in unicam_open
- media: i2c: tc358743: Fix fallthrough warning
- media: bcm2835: unicam: Fix uninitialized warning
- video: bcm2708_fb: Disable FB if no displays found
- dt-bindings: media: i2c: Add IMX477 CMOS sensor binding
- media: bcm2835-unicam: Always service interrupts
- sc16is7xx: Fix for hardware flow control
- staging: vc04_services: mmal-vchiq: Update parameters list
- staging:vc04_services: bcm2835-camera: Request headers with I-frame
- media: bcm2835-unicam: Retain packing information on G_FMT
- zswap: Defer zswap initialisation
- media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
- snd_bcm2835: disable HDMI audio when vc4 is used (#3640)
- gpiolib: Don't prevent IRQ usage of output GPIOs
- PCI: brcmstb: Add DT property to control L1SS
- media: irs1125: Using i2c_transfer for ic2 reads
- media: irs1125: Refactoring and debug messages
- media: irs1125: Atomic access to imager reconfiguration
- media: irs1125: Keep HW in sync after imager reset
- staging: bcm2835-audio: Add missing MODULE_ALIAS
- brcmfmac: Prefer a ccode from OTP over nvram file
- drivers: media: Remove the downstream version of bcm2835-unicam
- media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
- media: bcm2835-unicam: Add support for get_mbus_config to set num lanes
- media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint
- media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
- media: i2c: imx290: Add support for 74.25MHz clock
- media: i2c: imx290: Correct range for V4L2_CID_GAIN to 0-238
- media: i2c: imx290: Convert HMAX setting into V4L2_CID_HBLANK
- media: i2c: imx290: Add support for V4L2_CID_VBLANK
- media: i2c: imx290: Add exposure control to the driver.
- media: i2c: imx290: Add H and V flip controls
- media: dt-bindings: media: i2c: Add mono version to IMX290 bindings
- media : i2c: imx290: Add support for the mono sensor variant.
- media: i2c: imx290: Switch set_hmax to use imx290_write_buffered_reg
- serial: 8250: bcm2835aux - defer if clock is zero
- media: Add a pixel format for MIPI packed 12bit luma only.
- media: Add a pixel format for MIPI packed 14bit luma only.
- media: bcm2835-unicam: Add support for 12bit mono packed format
- media: bcm2835-unicam: Add support for 14bit mono sources
- media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats
- bcm2835-dma: Add NO_WAIT_RESP flag
- media: i2c: imx290: Explicitly set v&h blank on mode change
- media: i2c: imx290: Add support for g_selection to report cropping
- media: i2c: imx290: Set the colorspace fields in the format
- media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps
- media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection
- media: bcm2835: unicam: Set VPU min clock freq to 250Mhz.
- dt-bindings: bcm2835-unicam: Update documentation with new clock params
- leds: Add the actpwr trigger
- bcm2835-dma: Advertise the full DMA range
- media: bcm2835: unicam: Select MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API
- staging: media: rpivid: Select MEDIA_CONTROLLER and
MEDIA_CONTROLLER_REQUEST_API
- media: bcm2835-unicam: Drop WARN on uing direct cache alias
- media: i2c: tc358743: Only allow supported pixel fmts in set_fmt
- dwc_otg: whitelist_table is now productlist_table
- include/firmware: Add enum for RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID
- media: i2c: Add driver for Sony IMX477 sensor
- media: i2c: imx477: Add support for adaptive frame control
- media: i2c: imx477: Return correct result on sensor id verification
- media: i2c: imx477: Parse and register properties
- media: bcm2835-unicam: Always service interrupts
- media: bcm2835: unicam: Fix uninitialized warning
- media: bcm2835-unicam: Fixup review comments from Hans.
- media: bcm2835-unicam: Retain packing information on G_FMT
- media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
- staging/fbtft: Add support for display variants
- brcmfmac: Increase power saving delay to 2s
- rpivid_h265: Fix width/height typo
- net: bcmgenet: Reset RBUF on first open
- char: Add broadcom char drivers back to build files
- dwc_otg: initialise sched_frame for periodic QHs that were parked
- staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
- staging: vc04_services: Add new vc-sm-cma driver
- staging: vchiq-mmal: Add support for 14bit Bayer
- staging: mmal-vchiq: Add monochrome image formats
- staging: mmal-vchiq: Use vc-sm-cma to support zero copy
- staging: vc04_services: Add a V4L2 M2M codec driver
- bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled
- uapi: bcm2835-isp: Add bcm2835-isp uapi header file
- staging: vc04_services: ISP: Add a more complex ISP processing component
- gpio: Add gpio-fsm driver
- staging: bcm2835-audio: Add disable-headphones flag
- rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
- dwc_otg: Minimise header and fix build warnings
- rpivid_h625: Fix build warnings
- bcm2708_fb: Fix a build warning
- watchdog: bcm2835: Ignore params after the partition number
- firmware: raspberrypi: Add support for tryonce reboot flag
- phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
- phy: broadcom: Add bcm54213pe configuration
- PCI: brcmstb: Restore initial fundamental reset
- Input: edt-ft5x06: Poll the device if no interrupt is configured.
- drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay.
- drm/panel/raspberrypi-ts: Insert delay before polling for startup state
- dt-bindings: Add compatible for BCM2711 DSI1
- media: bcm2835-unicam: Correctly handle error propagation for stream on
- media: bcm2835-unicam: Return early from stop_streaming() if stopped
- media: bcm2835-unicam: Clear clock state when stopping streaming
- PCI: brcmstb: Advertise MSI-X support
- net: lan78xx: Ack pending PHY ints when resetting
- media: i2c: imx477: Selection compliance fixes
- vc-sm-cma: fixed kbuild problem
- staging/vc04_services: Add additional unpacked raw formats
- staging/bcm2835-codec: Add the unpacked (16bpp) raw formats
- staging/bcm2835-codec: Log the number of excess supported formats
- staging/bcm2835-isp: Add the unpacked (16bpp) raw formats
- staging/bcm2835-isp: Log the number of excess supported formats
- bcm2835-dma: Avoid losing CS flags after interrupt
- arch/arm: Add __memset alias to memset_rpi.S
- bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags
- uapi: bcm2835-isp: Add colour denoise configuration
- staging: vc04_services: ISP: Add colour denoise control
- spi: bcm2835: Workaround/fix for zero-length transfers
- kbuild: Silence unavoidable dtc overlay warnings
- media: i2c: imx290: Replace V4L2_CID_GAIN with V4L2_CID_ANALOGUE_GAIN
- media: i2c: imx290: Fix number of controls in v4l2_ctrl_handler_init
- dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
- staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld
- bcm2835-isp: Allow formats with different colour spaces.
- staging: rpivid: Fix crash when CMA alloc fails
- media: i2c: imx477: Remove auto frame length adjusting
- media: i2c: imx477: Add very long exposure control to the driver
- media: i2c: imx290: Fix up exposure calcuations and ranges
- media: i2c: imx290: Handle exposure correctly when vblank changes
- media: i2c: imx477: Fix crop height for 2028x1080 mode
- media: i2c: imx477: Replace existing 1012x760 mode
- media: i2c: imx477: Remove internal v4l2_mbus_framefmt from the state
- media: i2c: imx477: Remove unused function parameter
- media: bcm2835-unicam: Fix bug in buffer swapping logic
- Assign crypto aliases to different AES implementation modules
- media/v4l2_m2m: In buffered mode run jobs if either port is streaming
- staging/bcm2835-codec: Correct logging of size_t to %zu
- staging/bcm2835-codec: Add support for pixel aspect ratio
- staging/bcm2835-codec: Implement additional g_selection calls for decode
- staging/bcm2835-codec: Add VC-1 support.
- hack: fixup bcm2835-unicam
- media: i2c: add ov9281 driver.
- media: i2c: ov9281: fix mclk issue when probe multiple camera.
- media: i2c: ov9281: add enum_frame_interval function for iq tool 2.2 and
hal3
- media: i2c: ov9281: Fixup for recent kernel releases, and remove custom code
- media: i2c: ov9281: Read chip ID via 2 reads
- media: i2c: ov9281: Add support for 8 bit readout
- media: ov9281: Add 1280x720 and 640x480 modes
- Fixed picture line bug in all ov9281 modes
- Added hflip and vflip controls to ov9281
- media: ov5647: Fix return codes from ov5647_write/ov5647_read functions.
- media: i2c: ov5647: Parse and register properties
- clk-raspberrypi: Also support HEVC clock
- rpivid: Request maximum hevc clock
- staging/bcm2835-camera: Add support for DMABUFs
- staging: fbtft: Add minipitft13 variant
- dwc-otg: fix clang -Wignored-attributes warning
- dwc-otg: fix clang -Wsometimes-uninitialized warning
- dwc-otg: fix clang -Wpointer-bool-conversion warning
- staging: vcsm-cma: Fix memory leak from not detaching dmabuf
- clk: Introduce a clock request API
- bcm2835-unicam: Switch to new clock api
- rpivid: Switch to new clock api
- rpivid: Only clk_request_done once
- dwc_otg: fix an undeclared variable
- drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep
- clk: requests: Ignore if the pointer is null
- clk: requests: Dereference the request pointer after the check
- staging/bcm2835-codec: Fix support for levels 4.1 and 4.2
- staging/bcm2835-codec: Set the colourspace appropriately for RGB formats
- staging/bcm2835-codec: Pass corrupt frame flag.
- staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2
- staging/bcm2835-codec: Do not update crop from S_FMT after res change
- staging/bcm2835-isp: Fix compiler warning
- gpio-poweroff: Remember the old poweroff handler
- media: i2c: ov5647: Correct pixel array offset
- media: i2c: ov5647: Correct minimum VBLANK value
- media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
- media: rpivid: Remove the need to have num_entry_points set
- media: rpivid: Convert to MPLANE
- media: rpivid: Add an enable count to irq claim Qs
- RFC: media: Add media_request_{pin,unpin} API
- media: rpivid: Add a Pass0 to accumulate slices and rework job finish
- media: rpivid: Map cmd buffer directly
- media: rpivid: Improve values returned when setting output format
- media: rpivid: Improve stream_on/off conformance & clock setup
- media: rpivid: Improve SPS/PPS error handling/validation
- bcm2835: Allow compressed frames to set sizeimage (#4386)
- media: i2c: imx477: Fix for long exposure limit calculations
- clk: bcm2835: Pass DT node to rpi_firmware_get
- bcm2835-pcm.c: Support multichannel audio
- bcm2835-pcm: Fix up multichannel pcm audio
- media: i2c: imx290: Support 60fps in 2 lane operation
- media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
- media: i2c: imx290: Fix clock setup register assignments
- media: rpivid: Fix H265 aux ent reuse of the same slot
- media: i2c: ov9281: Remove override of subdev name
- staging: vc04_services: isp: Set the YUV420/YVU420 format stride to 64 bytes
- Documentation: devicetree: Add documentation for imx378 sensor
- media: i2c: imx477: Extend driver to support imx378 sensor
- dt-bindings: clk: raspberrypi: Remove unused property
- dt-bindings: display: vc4: Add phandle to the firmware
- bcm2711_thermal: Don't clamp temperature at zero
- media: bcm2835-unicam: Forward input status from subdevice
- media: v4l2-subdev: add subdev-wide state struct
- drm/vc4: Adopt the dma configuration from the HVS or V3D component
- Support RPi DPI interface in mode6 for 18-bit color
- drm/vc4: Add support for DRM_FORMAT_P030 to vc4 planes
- drm/vc4: Add support for YUV color encodings and ranges
- drm/vc4: Add FKMS as an acceptable node for dma ranges.
- drm/vc4: A present but empty dmas disables audio
- drm/vc4: Add debugfs node that dumps the current display lists
- drm/vc4: Add all the HDMI registers into the debugfs dumps
- drm/vc4: Add the 2711 HVS as a suitable DMA node
- vc4_hdmi: Report that 3d/stereo is allowed
- vc4: Clear unused infoframe packet RAM registers
- drm/vc4: Change the default DPI format to being 18bpp, not 24.
- vc4/drm: Avoid full hdmi audio fifo writes
- vc4/drm: Fix source offsets with DRM_FORMAT_P030
- vc4/drm: vc4_plane: Remove subpixel positioning check
- vc4/kms: vc4_plane: Support 2020 colourspace for yuv planes
- drm/vc4: hdmi: Convert to the new clock request API
- drm/vc4: Correct pixel order for DSI0
- drm/vc4: Register dsi0 as the correct vc4 encoder type
- drm/vc4: Fix dsi0 interrupt support.
- drm/vc4: Add correct stop condition to vc4_dsi_encoder_disable iteration
- drm/atomic: Don't fixup modes that haven't been reset
- drm/vc4: Allow DBLCLK modes even if horz timing is odd.
- clk: Always clamp the rounded rate
- drm/vc4: Increase the core clock based on HVS load
- drm/vc4: hdmi: Simplify the connector state retrieval
- drm/vc4: Fix timings for interlaced modes
- dwc_otg: Update NetBSD usb.h header licence
- drm/vc4: Fix margin calculations for the right/bottom edges
- drm/vc4: Fix timings for VEC modes
- drm/vc4: Refactor VEC TV mode setting
- drm/vc4: Fix definition of PAL-M mode
- drm/vc4: Add support for more analog TV standards
- drm/vc4: Allow setting the TV norm via module parameter
- drm/vc4: Refactor mode checking logic
- drm/vc4: Add firmware-kms mode
- media: i2c: imx477: Fix framerates for 1332x990 mode
- SQUASH: fbmem: Use fallthrough keyword
- ASoC: bcm: Compiler warnings in audioinjector-octo
- media: i2c: tc358743: Fix compiler warning
- ASoC: bcm: Add chipdip-dac driver
- drm/vc4: hdmi: Unregister codec device on unbind
- media: i2c: imx290: Add fwnode properties controls
- media: i2c: ov9281: Add fwnode properties controls
- media: i2c: ov7251: Add fwnode properties controls
- media: v4l2: Remove v4l2-ctrls.c
- media: v4l2: Add HEVC_SCALING_MATRIX attribute to v4l2-ctrl-*
- media: rpivid: Update to compile with new hevc decode params
- media: v4l2: Add Greyworld AWB control name
- videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
- v4l2-ctrls: add support for dynamically allocated arrays.
- media: rpivid: Make slice ctrl dynamic
- media: rpivid: Only create aux entries for H265 if needed
- usb: xhci: workaround for bogus SET_DEQ_PENDING endpoint state
- media: i2c: imx477: Allow control of on-sensor DPC
- sound/usb: add device quirks for A4Tech FHD 1080p webcams
- sound/usb: call usb_autopm_get_interface() for devices that should not
- brcmfmac: Try product-specific clm_blob names first
- staging: vchiq_arm: Add 36-bit address support
- staging: vchiq_arm: children inherit DMA config
- staging: vchiq_arm: Usa a DMA pool for small bulks
- drm/vc4: Reset HDMI MISC_CONTROL register.
- drm/vc4: Release workaround buffer and DMA in error paths and unbind
- drm/vc4: Correct DSI divider calculations
- drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
- drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
- drm/panel/raspberrypi-touchscreen: Handle I2C errors.
- drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
- Input: edt-ft54x6: Clean up timer and workqueue on remove
- regulator: rpi-panel: Register with a unique backlight name
- regulator: rpi-panel: Handle I2C errors/timing to the Atmel
- regulator: rpi-panel: Serialise operations.
- regulator: rpi-panel: Ensure the backlight is off during probe.
- regulator: rpi-panel: Convert to drive lines directly
- regulator: rpi-panel: Add GPIO control for panel and touch resets
- staging/bcm2835-codec: Change the default codec res to 32x32
- staging/vchiq-mmal: Add buffer flags for interlaced video
- staging/vchiq-mmal: Add parameters for interlaced video support
- staging/bcm2835-codec: Add support for decoding interlaced streams
- staging/bcm2835-codec: Correct ENUM_FRAMESIZES stepsize to 2
- staging/bcm2835-codec: Return buffers to QUEUED not ERROR state
- staging/bcm2835_codec: Log MMAL flags in hex
- staging: bcm2835-codec: Allow custom specified strides/bytesperline.
- staging/vchiq-mmal: Add the deinterlace image effects enums
- staging/bcm2835_codec: Add support for image_fx to deinterlace
- staging/bcm2835-v4l2_codec: Fix for encode selection API
- Add Raspberry Pi PoE+ HAT support
- configs: Add CAN_PEAK_USB=m
- ARM: dts: Restore downstream dtbs to Makefile
- media: rpivid: Avoid returning EINVAL to a G_FMT ioctl
- net: phy: lan87xx: Allow more time for link detect
- media: rpivid: Remove unused ctx state variable and defines
- media: rpivid: Ensure IRQs have completed before uniniting context
- staging: bcm2835-codec: Allow decode res changed before STREAMON(CAPTURE)
- staging/bcm2835-codec: Do not send buffers to the VPU unless streaming
- staging/mmal-vchiq: Rationalise included headers
- staging: bcm2835-codec: Format changed should trigger drain
- staging: bcm2835-codec: Signal the firmware to stop on all changes
- staging/mmal-vchiq: Add module parameter to enable logging.
- staging: bcm2835-codec: Queue flushed buffers instead of completing
- staging: mmal-vchiq: Reset buffers_with_vpu on port_enable
- staging: bcm2835_codec: Correct flushing code for refcounting
- staging: bcm2835-codec: Ensure all ctrls are set on streamon
- staging: bcm2835-codec: Add support for H&V Flips to ISP
- overlays: add support for the MLX90640 thermal camera
- overlays: Add generic mcp2515 overlay
- regulator: rpi-panel: Remove get_brightness hook
- bcm2835_smi_dev: Fix handling of word-odd lengths
- Revert "mmc: sdhci-iproc: Fix vmmc regulators on iProc"
- mmc: sdhci-iproc: Fix vmmc regulators (pre-bcm2711)
- dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
- media: i2c: Add driver for IMX519 sensor
- media: i2c: imx519: Advertise embedded data node on media pad 1
- configs: Add CONFIG_VIDEO_IMX519=m
- overlays: Add imx519-overlay.dts
- dtoverlays: Add overlay for ST7735R (160x128) TinyDRM driver
- dwc_otg: pay attention to qh->interval when rescheduling periodic queues
- Hifiberry DAC+ADCPro DT overlay: add optional headphone amp
- Hifiberry DAC+ADCPro: adding optional headphone amp control
- Add module for 8111h chip used in various CM4 boards
- drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller
- rtc: pcf85063: Always clear EXT_TEST from set_time
- char: vcio: Rewrite as a firmware node child
- ARM: dts: Make vcio a child of the firmware node
- ARM: dts: bcm2835_audio missing firmware reference
- ARM: dts: Delete vestigial vcsm node
- config: Enable FSFS_FS_SECURITY
- gpio: bcm-virt: Fix the get() method
- configs: Add CONFIG_FB_SIMPLE to bcmrpi3_defconfig
- media: i2c: imx219: Sensor should report RAW color space
- media: i2c: imx290: Sensor should report RAW color space
- media: i2c: imx477: Sensor should report RAW color space
- media: i2c: imx519: Sensor should report RAW color space
- media: i2c: ov5647: Sensor should report RAW color space
- media: i2c: ov9281: Sensor should report RAW color space
- vc04_services: isp: Report input node as wanting full range RAW color space
- media/bcm2835-unicam: Parse pad numbers correctly
- media/bcm2835-unicam: Add support for configuration via MC API
- ARM: dts: vc4-kms-v3d: Always disable firmware HDMI
- staging/bcm2835-camera: Add support for H264_MIN_QP, H264_MAX_QP
- staging/bcm2835-camera: Add support for MPEG_VIDEO_FORCE_KEY_FRAME
- ARM: dts: Add Pi Zero 2 support
- clk-raspberrypi: Support VEC clock
- dt: Move VEC clock to clk-raspberrypi
- clk-bcm2835: Remove VEC clock support
- drm/vc4: Add support for gamma on BCM2711
- drm/vc4: Add debugfs node that dumps the vc5 gamma PWL entries
- drm/vc4: hvs: Force modeset on gamma lut change
- media: i2c: imx477: Add vsync trigger_mode parameter
- drm/vc4: Relax VEC modeline requirements and add progressive mode support
- drm/vc4: Make VEC progressive modes readily accessible
- bcm2835-v4l2-codec: Remove advertised support of VP8
- ARM: dts: Rename Zero 2 W DT files
- brcmfmac: Don't promote INFO logging to ERR
- dtoverlays: Update all image sensor overlays for Media Controller option
- ARM: dt: Add DT nodes for the WLAN interfaces
- brcmfmac: Read alternative firmware names from DT
- ARM: dts: Provide WLAN firmware names for Zero 2 W
- drm: Check whether the gamma lut has changed before updating
- brcmfmac: Protect against reprobing
- drm/vc4: kms: Fix return code check
- drm/vc4: kms: Move clock request to our HVS state
- overlays: Add fbtft overlay
- configs: Regenerate defconfigs
- configs: Add NTFS3 support
- configs: Add kernel SMB3 server support
- config: Set TCA8418 to module
- overlays: Additional parameters for gpio-poweroff
- configs: Add TCA6416 driver module
- drm: Fix double free from checking if gamma lut has been updated
- drm/vc4: Enable gamma block only when required.
- drm/vc4: Only add gamma properties once.
- dtoverlays: Remove i2c0mux and i20if status from edt-ft5406.dtsi
- drm/vc4: Validate the size of the gamma_lut
- drm/vc4: Don't try disabling SCDC on Pi0-3.
- enable several virtual devices for hosting virtual machines
- configs: add CONFIG_HID_PLAYSTATION=m and CONFIG_PLAYSTATION_FF=y
- configs: add LEDS_PWM=y
- configs: Add USB gadget support (for Zero 2 W)
- media: i2c: ov5647: Support HFLIP and VFLIP
- drivers: bcm2835_isp: Allow multiple users for the ISP driver.
- drivers: bcm2835_isp: Fix div by 0 bug.
- Pass V4L2_CID_MPEG_VIDEO_H264_MIN_QP/MAX_QP to bcm2835-v4l2-codec
- ARM: dts: Update rpi-400 and cm4 dts to match 4-b
- spi: spidev: Restore loading from Device Tree
- drm/vc4: Add support for composite syncs to vc4_dpi
- drm/vc4: Ensure vc4_hdmi doesn't use 2711 HPD registers on Pi0-3
- ARM: dts: gpio-ranges property is now required
- input: edt-ft5x06: Handle unreliable TOUCH_UP events
- dtoverlays: Use edt-ft5506 for 10 points, instead of edt-ft5x06
- staging/bcm2835-codec: bytesperline for YUV420/YVU420 needs to be 64
- media: rpivid: remove min_buffers_needed from src queue
- staging/bcm2835-codec: Allow a different stride alignment per role
- drivers: bcm2835_unicam: Add logging message when a frame is dropped.
- regulator/rpi-panel-attiny: Don't read the LCD power status
- regulator/rpi-panel-attiny: Use two transactions for I2C read
- input: edt-ft5x06: Only look at the number of points reported
- drm/vc4: Move HDMI reset to pm_resume
- clk: bcm: rpi: Add the BCM283x pixel clock.
- dt: bcm283x: Change BCM283x HDMI to use firmware clock driver
- Revert "Revert "overlays: vc4-kms-v3d: Change composite handling""
- drm/panel-simple: Populate bpc when using panel-dpi
- drm/panel-simple: When using panel-dpi, update desc
- drm/panel-simple: Allow the bus format to be read from DT for panel-dpi
- drm/vc4: dpi: Add option for inverting pixel clock and output enable
- drm/vc4: dpi: Ensure a default format is selected
- dt: bcm270x: Add GPIO defines for RGB565 DPI output modes
- dtoverlays: Add a generic DPI panel overlay for KMS
- xhci: quirks: add link TRB quirk for VL805
- xhci: correct room_on_ring() for cases where there is a single segment
- media: imx219: Advertise embedded data node on media pad 1
- vc4/drm: Ignore vc4_hdmi->output_enabled for allowing audio (#4759)
- ARM: dts: Create bcm2711-rpi-cm4s.dts (#4761)
- xhci: refactor out TRBS_PER_SEGMENT define in runtime code
- usb: xhci: add VLI_TRB_CACHE_BUG quirk
- drm/vc4: Fix build without DRM_VC4_HDMI_CEC
- dt: Create static regulators and clocks for camera nodes
- dtoverlays: Convert the camera sensor overlays to use the new regs and clks.
- media: i2c: ov5647: Add support for regulator control.
- dtoverlays: Convert ov5647 to use the regulator framework
- media: i2c: ov7251: Make the enable GPIO optional.
- ARM: dts: bcm2711-cm4s Correct i2c0mux to use 0/1 and 28/29 & 2 regulators
- dtoverlays: Add option to select camera as on CAM0 of CM
- ASoC:ma120x0p: Increase maximum sample rate to 192KHz
- staging/bcm2835-isp: Fix cleanup after init fail
- drm/vc4: kms: Take old state core clock rate into account
- drm/vc4: hvs: Store channel in variable
- drm/vc4: hvs: Remove dlist setup duplication
- drm/vc4: hvs: Move the dlist setup to its own function
- drm/vc4: hvs: Ignore atomic_flush if we're disabled
- drm/vc4: plane: Use dlist offset instead of pointer
- drm/vc4: hvs: Create a shadow dlist
- drm/vc4: Skip writes to disabled packet RAM
- drm/edid: Don't clear YUV422 if using deep color
- drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
- drm/vc4: hdmi: Add full range RGB helper
- drm/vc4: hdmi: Use full range helper in csc functions
- drm/vc4: hdmi: Move XBAR setup to csc_setup
- drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
- drm/vc4: hdmi: Define colorspace matrices
- drm/vc4: hdmi: Change CSC callback prototype
- drm/vc4: hdmi: Move clock validation to its own function
- drm/vc4: hdmi: Move clock calculation into its own function
- drm/vc4: hdmi: Take the sink maximum TMDS clock into account
- drm/vc4: hdmi: Take bpp into account for the scrambler
- drm/vc4: hdmi: Always try to have the highest bpc
- drm/vc4: hdmi: Support HDMI YUV output
- media: v4l2-ctrls: Add V4L2_CID_NOTIFY_GAINS control
- media: v4l2-ctrls: Document V4L2_CID_NOTIFY_GAINS control
- Extending ili9881c driver support for nwe080 panel
- Enable ili9881 panel and pwm backlight driver by default
- Add panel overlay for CutiePi
- dtoverlays: Enable cam1_clock when using tc358743 or irs1125
- uapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BASE to same as 5.10
- drm/vc4: hdmi: Fix HDMI monitor detection in polled mode
- drm/vc4: hdmi: Fix no video output on DVI monitors
- drm/vc4: Correct interrupt enable bits on hvs4
- staging/bcm2835-codec: Fix typo
- media: i2c: ov9281: Increase diff between VTS and max exposure
- bcm2835-v4l2-isp: Add missing lock initialization
- configs: Enable Azoteq IQS550/572/525
- overlays: Add overlay for Azoteq IQS550
- dtoverlays: Add backlight-gpio parameter to vc4-kms-dpi-generic
- configs: add CONFIG_LEDS_TRIGGER_PATTERN=m
- drm/vc4: Fix interrupt masking for HVS5.
- drm/vc4: Add alpha_blend_mode property to each plane.
- arm: Fix custom rpi __memset32 and __memset64
- overlays: Add vl805 overlay
- arm: Fix annoying .eh_frame section warnings
- drm/vc4: Disable Gamma control on HVS5 due to issues writing the table
- drm/vc4: hdmi: Fix clock value used for validating hdmi modes
- [Config] raspi: updateconfigs after rebase to rpi-5.15.y (2022-01-14)
* Miscellaneous Ubuntu changes
- [Packaging] raspi: Initial import of debian.raspi from impish:linux-raspi
(5.13.0-1014.16)
- [Packaging] raspi: Initial version of linux-raspi for Jammy
- SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart0
- SAUCE: arm: dts: Add 'brcm,bcm2835-gpio' compatible for gpio
- SAUCE: Revert "cgroup: Disable cgroup "memory" by default"
[ Ubuntu: 5.15.0-17.17 ]
* jammy/linux: 5.15.0-17.17 -proposed tracker (LP: #1957809)
linux-raspi (5.15.0-1000.0) jammy; urgency=medium
* Initial version of linux-raspi for Jammy.
-- Juerg Haefliger <juergh at canonical.com> Fri, 28 Jan 2022 14:42:07
+0100
** Changed in: linux-raspi (Ubuntu Jammy)
Status: New => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2021-4155
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2022-0185
--
You received this bug notification because you are a member of Ubuntu
Package Archive Administrators, which is a bug assignee.
https://bugs.launchpad.net/bugs/1958834
Title:
jammy/linux-raspi: 5.15.0-1002.2 -proposed tracker
To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1958834/+subscriptions
More information about the ubuntu-archive
mailing list