[Ubuntu-BR] help com webcam

[Joao Paulo]

Boa tarde,

estou a uns 3 dias tentando fazer uma webcam USB creative, modelo 
PD0040, mais não consigo de jeito nenhum..

seguem meus logs..

jpbotelho em jpb0x:~/downloads/spca5xx-20060501$ lsmod | grep spca
spca5xx               678608  0
videodev                9728  2 spca5xx,ov51x
usbcore               130304  5 spca5xx,ov51x,ehci_hcd,ohci_hcd


jpbotelho em jpb0x:/proc/bus/usb/002$ cat /proc/bus/usb/devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.17-10-386 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:03.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05a9 ProdID=0518 Rev= 1.09
S:  Manufacturer=OmniVision Technologies, Inc.
S:  Product=USB Camera
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS= 129 Ivl=1ms
I:  If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS= 257 Ivl=1ms
I:  If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS= 385 Ivl=1ms
I:  If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS= 513 Ivl=1ms
I:  If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS= 641 Ivl=1ms
I:  If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS= 769 Ivl=1ms
I:  If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov51x
E:  Ad=81(I) Atr=01(Isoc) MxPS= 897 Ivl=1ms

jpbotelho em jpb0x:/proc/bus/usb/002$ lsusb
Bus 004 Device 001: ID 0000:0000 
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 003: ID 05a9:0518 OmniVision Technologies, Inc. OV518 WebCam
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 



Até ai parece que esta tudo OK de drivers, mais quando vou iniciar algum 
programa de cam recebo mensagens que não consegue achar o /dev/video0

jpbotelho em jpb0x:/proc/bus/usb/002$ webcam
reading config file: /home/jpbotelho/.webcamrc
v4l2: open /dev/video0: Function not implemented
v4l2: open /dev/video0: Function not implemented
v4l: open /dev/video0: Function not implemented
no grabber device available
jpbotelho em jpb0x:/proc/bus/usb/002$

jpbotelho em jpb0x:/proc/bus/usb/002$ gqcam
/dev/video: Function not implemented

e ja testei o camorama tmb e nada..

alguem me da um help.. juro que não foi falta de pesquisa antes de 
mandar o email pra lista..

valeu