munin-node 3ware

[ML] Michael Windelen ml at fam-windelen.de
Fr Jun 11 09:23:15 BST 2010


Hallo Liste,

mich ärgert gerade munin-node.

Nach dem upgrade von 8.04 LTS auf 10.04 LTS wird mir kein smartwert mehr
für zwei Platten an einem RAID-Controller ausgegeben...

# munin-run smart_twa0-1

Current_Pending_Sector.value U
Load_Cycle_Count.value U
Offline_Uncorrectable.value U
Power_Cycle_Count.value U
Power_Off_Retract_Count.value U
Power_On_Hours.value U
Raw_Read_Error_Rate.value U
Reallocated_Event_Count.value U
Reallocated_Sector_Ct.value U
Seek_Error_Rate.value U
Seek_Time_Performance.value U
Spin_Retry_Count.value U
Spin_Up_Time.value U
Start_Stop_Count.value U
Temperature_Celsius.value U
Throughput_Performance.value U
UDMA_CRC_Error_Count.value U
smartctl_exit_status.value U


# env /etc/munin/plugins/smart_twa0-1
Current_Pending_Sector.value U
Load_Cycle_Count.value U
Offline_Uncorrectable.value U
Power_Cycle_Count.value U
Power_Off_Retract_Count.value U
Power_On_Hours.value U
Raw_Read_Error_Rate.value U
Reallocated_Event_Count.value U
Reallocated_Sector_Ct.value U
Seek_Error_Rate.value U
Seek_Time_Performance.value U
Spin_Retry_Count.value U
Spin_Up_Time.value U
Start_Stop_Count.value U
Temperature_Celsius.value U
Throughput_Performance.value U
UDMA_CRC_Error_Count.value U
smartctl_exit_status.value U

Ein env smartargs="-d 3ware,1" /etc/munin/plugins/smart_twa0-1

liefert jedoch Werte...

Power_Off_Retract_Count.value 100
Power_Cycle_Count.value 100
Current_Pending_Sector.value 100
Start_Stop_Count.value 100
Offline_Uncorrectable.value 100
Seek_Time_Performance.value 134
Seek_Error_Rate.value 100
Load_Cycle_Count.value 100
Reallocated_Event_Count.value 100
UDMA_CRC_Error_Count.value 200
Reallocated_Sector_Ct.value 100
Power_On_Hours.value 098
Spin_Up_Time.value 123
Spin_Retry_Count.value 100
Temperature_Celsius.value 171
Throughput_Performance.value 130
Raw_Read_Error_Rate.value 100
smartctl_exit_status.value 0

Was läuft da schief?

In der smart_ steht:

[smart_twa0-1]
  user root
  env.smartargs -H -l error -d 3ware,1
  env.ignorestandby True


-- 
Grüße
Michael
-
Bitte kein Cc an mich, ich lese die Liste.