Re: Festplatte prüfen

[Tiri]

Ich habe folgende Meldungen erhalten, nachdem ich mit meine Festplatte
geprüft habe.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED 
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always      
-       0
  3 Spin_Up_Time            0x0027   186   183   021    Pre-fail  Always      
-       1658
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always      
-       3530
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always      
-       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always      
-       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always      
-       3838
 10 Spin_Retry_Count        0x0032   100   100   051    Old_age   Always      
-       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always      
-       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always      
-       3510
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always      
-       51
193 Load_Cycle_Count        0x0032   164   164   000    Old_age   Always      
-       108136
194 Temperature_Celsius     0x0022   096   083   000    Old_age   Always      
-       51
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always      
-       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always      
-       1
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline     
-       1
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always      
-       0
200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline     
-       1

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours) 
LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      3835        
4402652
# 2  Extended offline    Completed: read failure       90%      3835        
4402652
# 3  Extended offline    Completed: read failure       90%      3835        
4402652
# 4  Short offline       Completed: read failure       90%      3835        
4402652
# 5  Extended offline    Completed: read failure       90%      3831        
4402652
# 6  Extended offline    Completed: read failure       90%      3722        
4402652
# 7  Conveyance offline  Completed without error       00%         0        
-

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Kann mir bitte jemand bei der Analyse helfen? 



--
View this message in context: http://ubuntu.5.n6.nabble.com/Festplatte-prufen-tp988928p5013179.html
Sent from the ubuntu-de mailing list archive at Nabble.com.