Problemas Controladora Conceptronic Serial ata & ide > combo card

[spoolk kloops]

Hola que tal, llevo 4 dias con el Kubuntu , y en esos 4 dias no he
encontrado la forma de hacer funcionar la controladora "Conceptronic Serial
ata & ide combo card".

Se supone que lleva un Chipset Via.

La instalación del Kubuntu no la detectó y probé con la instalación de Suse
10 y tampoco la detectó.

Me podriais echar una mano?.

Os adjunto la salida del dmesg.

Muchas gracias de antemano.
un saludo.

 Disabled by ACPI PNP
[4294670.096000] PCI: Using ACPI for IRQ routing
[4294670.096000] PCI: If a device doesn't work, try "pci=routeirq".  If it
helps
, post a report
[4294670.102000] audit: initializing netlink socket (disabled)
[4294670.102000] audit: initialized
[4294670.102000] highmem bounce pool size: 64 pages
[4294670.102000] VFS: Disk quotas dquot_6.5.1
[4294670.102000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.102000] devfs: 2004-01-31 Richard Gooch (rgooch en atnf.csiro.au)
[4294670.102000] devfs: boot_options: 0x0
[4294670.102000] Initializing Cryptographic API
[4294670.102000] isapnp: Scanning for PnP cards...
[4294670.454000] isapnp: No Plug & Play device found
[4294670.468000] PNP: PS/2 controller doesn't have AUX irq; using default
0xc
[4294670.468000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294670.468000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.468000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.468000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ
shari
ng enabled
[4294670.468000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.470000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.470000] io scheduler noop registered
[4294670.470000] io scheduler anticipatory registered
[4294670.470000] io scheduler deadline registered
[4294670.470000] io scheduler cfq registered
[4294670.471000] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 bl
ocksize
[4294670.471000] EISA: Probing bus 0 at eisa.0
[4294670.471000] EISA: Detected 0 cards.
[4294670.471000] NET: Registered protocol family 2
[4294670.480000] IP: routing cache hash table of 16384 buckets, 128Kbytes
[4294670.480000] TCP established hash table entries: 524288 (order: 10,
4194304
bytes)
[4294670.488000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.489000] TCP: Hash tables configured (established 524288 bind 65536)
[4294670.489000] NET: Registered protocol family 8
[4294670.489000] NET: Registered protocol family 20
[4294670.489000] ACPI wakeup devices:
[4294670.489000] PCI0 PS2K UAR1 AC97 USB1 USB2 USB3 USB4 EHCI VUSB ILAN
[4294670.489000] ACPI: (supports S0 S1 S3 S4 S5)
[4294670.489000] Freeing unused kernel memory: 224k freed
[4294670.506000] vga16fb: initializing
[4294670.506000] vga16fb: mapped to 0xc00a0000
[4294670.900000] Console: switching to colour frame buffer device 80x30
[4294670.900000] fb0: VGA16 VGA frame buffer device
[4294670.918000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294672.176000] Capability LSM initialized
[4294672.187000] NET: Registered protocol family 1
[4294672.202000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.202000] ide: Assuming 33MHz system bus speed for PIO modes;
override wi
th idebus=xx
[4294672.202000] ACPI: bus type ide registered
[4294672.210000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[4294672.210000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low)
-> I
RQ 20
[4294672.210000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4
[4294672.210000] VP_IDE: chipset revision 6
[4294672.210000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.210000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on
pci0000:0
0:0f.1
[4294672.210000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA,
hdb:
DMA
[4294672.210000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA,
hdd:
DMA
[4294672.210000] Probing IDE interface ide0...
[4294672.594000] hda: ST3160021A, ATA DISK drive
[4294672.849000] hdb: ST3120022A, ATA DISK drive
[4294672.901000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294672.901000] Probing IDE interface ide1...
[4294673.693000] hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
[4294674.407000] hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
[4294674.460000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.460000] Probing IDE interface ide2...
[4294674.973000] Probing IDE interface ide3...
[4294675.485000] Probing IDE interface ide4...
[4294675.997000] Probing IDE interface ide5...
[4294676.512000] hda: max request size: 1024KiB
[4294676.513000] hda: 312581808 sectors (160041 MB) w/2048KiB Cache,
CHS=19457/2
55/63, UDMA(100)
[4294676.513000] hda: cache flushes supported
[4294676.513000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
[4294676.544000] hdb: max request size: 1024KiB
[4294676.545000] hdb: 234441648 sectors (120034 MB) w/2048KiB Cache,
CHS=16383/2
55/63, UDMA(100)
[4294676.545000] hdb: cache flushes supported
[4294676.545000]  /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
[4294676.564000] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB
Cache
[4294676.564000] Uniform CD-ROM driver Revision: 3.20
[4294676.576000] hdd: ATAPI 52X DVD-ROM drive, 256kB Cache
[4294677.111000] SCSI subsystem initialized
[4294677.113000] libata version 1.11 loaded.
[4294677.114000] sata_via version 1.1
[4294677.114000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low)
-> I
RQ 17
[4294677.114000] PCI: Via IRQ fixup for 0000:00:0d.0, from 10 to 1
[4294677.114000] sata_via(0000:00:0d.0): routed to hard irq line 1
[4294677.114000] ata1: SATA max UDMA/133 cmd 0xBC00 ctl 0xBC0A bmdma 0xAC00
irq
17
[4294677.114000] ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xB80A bmdma 0xAC08
irq
17
[4294677.315000] ata1: no device found (phy stat 00000000)
[4294677.315000] scsi0 : sata_via
[4294677.516000] ata2: no device found (phy stat 00000000)
[4294677.516000] scsi1 : sata_via
[4294677.516000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low)
-> I
RQ 20
[4294677.516000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 4
[4294677.517000] sata_via(0000:00:0f.0): routed to hard irq line 4
[4294677.517000] ata3: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00
irq
20
[4294677.517000] ata4: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08
irq
20
[4294677.718000] ata3: no device found (phy stat 00000000)
[4294677.718000] scsi2 : sata_via
[4294677.919000] ata4: no device found (phy stat 00000000)
[4294677.919000] scsi3 : sata_via
[4294677.941000] usbcore: registered new driver usbfs
[4294677.941000] usbcore: registered new driver hub
[4294677.942000] USB Universal Host Controller Interface driver v2.2
[4294677.942000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low)
-> I
RQ 21
[4294677.942000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
[4294677.942000] uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx
UHCI US
B 1.1 Controller
[4294678.004000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
num
ber 1
[4294678.004000] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
[4294678.004000] hub 1-0:1.0: USB hub found
[4294678.004000] hub 1-0:1.0: 2 ports detected
[4294678.007000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low)
-> I
RQ 21
[4294678.007000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
[4294678.007000] uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx
UHCI US
B 1.1 Controller (#2)
[4294678.069000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
num
ber 2
[4294678.069000] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
[4294678.069000] hub 2-0:1.0: USB hub found
[4294678.069000] hub 2-0:1.0: 2 ports detected
[4294678.072000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low)
-> I
RQ 21
[4294678.072000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
[4294678.072000] uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx
UHCI US
B 1.1 Controller (#3)
[4294678.134000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
num
ber 3
[4294678.134000] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
[4294678.134000] hub 3-0:1.0: USB hub found
[4294678.134000] hub 3-0:1.0: 2 ports detected
[4294678.137000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low)
-> I
RQ 21
[4294678.137000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
[4294678.137000] uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx
UHCI US
B 1.1 Controller (#4)
[4294678.199000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
num
ber 4
[4294678.199000] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
[4294678.199000] hub 4-0:1.0: USB hub found
[4294678.199000] hub 4-0:1.0: 2 ports detected
[4294678.228000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low)
-> I
RQ 21
[4294678.228000] ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
[4294678.228000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
num
ber 5
[4294678.228000] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
[4294678.228000] ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00,
driver 1
0 Dec 2004
[4294678.228000] hub 5-0:1.0: USB hub found
[4294678.228000] hub 5-0:1.0: 8 ports detected
[4294678.269000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by
Donald Be
cker
[4294678.269000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low)
-> I
RQ 23
[4294678.269000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 7
[4294678.269000] eth0: VIA Rhine II at 0x1d400, 00:0b:6a:a2:59:df, IRQ 23.
[4294678.269000] eth0: MII PHY found at address 1, status 0x786d advertising
05e
1 Link 41e1.
[4294679.341000] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[4294679.624000] usb 3-2: new low speed USB device using uhci_hcd and
address 2
[4294681.042000] usbcore: registered new driver hiddev
[4294681.062000] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on
usb-0000
:00:10.1-1
[4294681.062000] usbhid: probe of 3-2:1.0 failed with error -5
[4294681.062000] usbcore: registered new driver usbhid
[4294681.062000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294681.775000] ACPI: CPU0 (power states: C1[C1])
[4294681.775000] ACPI: Processor [CPU1] (supports 16 throttling states)
[4294682.150000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel en r
edhat.com
[4294682.189000] cdrom: open failed.
[4294682.757000] Attempting manual resume
[4294682.781000] swsusp: Suspend partition has wrong signature?
[4294682.814000] kjournald starting.  Commit interval 5 seconds
[4294682.814000] EXT3-fs: mounted filesystem with ordered data mode.
[4294684.098000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294688.477000] Adding 4763640k swap on /dev/mapper/Ubuntu-swap_1.
Priority:-1
 extents:1
[4294688.900000] EXT3 FS on dm-0, internal journal
[4294694.651000] parport: PnPBIOS parport detected.
[4294694.651000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTA
TE,COMPAT,EPP,ECP,DMA]
[4294694.740000] lp0: using parport0 (interrupt-driven).
[4294694.778000] mice: PS/2 mouse device common for all mice
[4294694.805000] Linux agpgart interface v0.101 (c) Dave Jones
[4294694.846000] nvidia: module license 'NVIDIA' taints kernel.
[4294694.895000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low)
-> I
RQ 16
[4294694.895000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module
1.0-7667
Fri Jun 17 07:01:04 PDT 2005
[4294699.596000] cdrom: open failed.
[4294700.989000] kjournald starting.  Commit interval 5 seconds
[4294700.989000] EXT3 FS on hdb1, internal journal
[4294700.989000] EXT3-fs: mounted filesystem with ordered data mode.
[4294700.997000] NTFS driver 2.1.22 [Flags: R/O MODULE].
[4294701.033000] NTFS volume version 3.1.
[4294701.074000] NTFS volume version 3.1.
[4294701.108000] NTFS volume version 3.1.
[4294703.373000] agpgart: Detected VIA PT880 chipset
[4294703.400000] agpgart: AGP aperture is 128M @ 0xf0000000
[4294703.687000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294703.701000] shpchp: shpc_init : shpc_cap_offset == 0
[4294703.701000] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[4294703.794000] Linux video capture interface: v1.00
[4294703.850000] bttv: driver version 0.9.15 loaded
[4294703.850000] bttv: using 8 buffers with 2080k (520 pages) each for
capture
[4294703.855000] bttv: Bt8xx card found (0).
[4294703.855000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low)
-> I
RQ 16
[4294703.855000] bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 16, latency:
64, mm
io: 0xefffe000
[4294703.855000] bttv0: detected: AVerMedia TVPhone98 [card=41], PCI
subsystem I
D is 1461:0003
[4294703.855000] bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
[4294703.855000] bttv0: gpio: en=00000000, out=00000000 in=00d4fff3 [init]
[4294703.971000] bttv0: Avermedia eeprom[0x4811]: tuner=5 radio:yes remote
contr
ol:yes
[4294703.971000] bttv0: using tuner=5
[4294703.971000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294703.973000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294703.976000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294703.987000] tvaudio: TV audio decoder + audio/video mux driver
[4294703.987000] tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda98
55,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
[4294704.026000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[4294704.046000] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
[4294704.046000] tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and
compati
bles))
[4294704.092000] bttv0: registered device video0
[4294704.093000] bttv0: registered device vbi0
[4294704.094000] bttv0: registered device radio0
[4294704.094000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294704.138000] bttv0: add subdevice "remote0"
[4294704.277000] bt878: AUDIO driver version 0.0.0 loaded
[4294704.282000] bt878: Bt878 AUDIO function found (0).
[4294704.282000] ACPI: PCI Interrupt 0000:00:0c.1[A] -> GSI 16 (level, low)
-> I
RQ 16
[4294704.282000] bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 16, latency: 64,
memo
ry: 0xeffff000
[4294705.013000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294705.013000]          Please try dxs_support=5 option
[4294705.013000]          and report if it works on your machine.
[4294705.013000]          For more details, read ALSA-Configuration.txt.
[4294705.013000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low)
-> I
RQ 22
[4294705.013000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6
[4294705.013000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294707.826000] Real Time Clock Driver v1.12
[4294707.911000] input: PC Speaker
[4294708.037000] FDC 0 is a post-1991 82077
[4294708.356000] ts: Compaq touchscreen protocol output
[4294709.723000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[4294711.116000] NET: Registered protocol family 10
[4294711.116000] Disabled Privacy Extensions on device c02eb280(lo)
[4294711.116000] IPv6 over IPv4 tunneling driver
[4294713.263000] ACPI: Power Button (FF) [PWRF]
[4294713.263000] ACPI: Power Button (CM) [PWRB]
[4294713.364000] ibm_acpi: ec object not found
[4294720.159000] apm: BIOS not found.
[4294721.554000] Bluetooth: Core ver 2.7
[4294721.554000] NET: Registered protocol family 31
[4294721.554000] Bluetooth: HCI device and connection manager initialized
[4294721.554000] Bluetooth: HCI socket layer initialized
[4294721.620000] Bluetooth: L2CAP ver 2.7
[4294721.620000] Bluetooth: L2CAP socket layer initialized
[4294721.665000] Bluetooth: RFCOMM ver 1.5
[4294721.665000] Bluetooth: RFCOMM socket layer initialized
[4294721.665000] Bluetooth: RFCOMM TTY layer initialized
[4294721.825000] eth0: no IPv6 routers present
[4294723.237000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294723.237000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294723.237000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294723.913000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294723.913000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294723.913000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-es/attachments/20060429/572229a7/attachment-0001.htm