se me corta la señal de internet
Willians López
willians_lopez en yahoo.com.ar
Jue Jun 5 17:21:55 BST 2008
Hola a Todos:
Hace días que vengo experimentando problemas con mi señal de internet,
ayer después de mucho crei lograr que funcione y nuevamente hoy tengo
problemas y es solo con el ubuntu...
Me recomendaron que cuando vuelva a tener este problema haga un dmesg
desde consola para ver si hay algun error y así lo hice ahora, pero
sinceramente no entiendo mucha de la información, así que la copio por
si alguien tuviera la pericia y el tiempo suficiente para explicarme si
algo va mal o tengo que ir buscando el problema por otro lado.
Desde ya muchas gracias.
Willians
Esto es lo que salio en el DMESG:
0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-17-generic (buildd en palmer) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC
2008 (Ubuntu 2.6.24-17.31-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000efc0000 (usable)
[ 0.000000] BIOS-e820: 000000000efc0000 - 000000000efce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000efce000 - 000000000eff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000eff0000 - 000000000f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 239MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 61376) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 61376
[ 0.000000] HighMem 61376 -> 61376
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 61376
[ 0.000000] On node 0 totalpages: 61376
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 447 pages used for memmap
[ 0.000000] Normal zone: 56833 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8A90 checksum 0
[ 0.000000] ACPI: RSDP 000F8A90, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 0EFC0000, 0030 (r1 A M I OEMRSDT 7000513
MSFT 97)
[ 0.000000] ACPI: FACP 0EFC0200, 0084 (r2 A M I OEMFACP 7000513
MSFT 97)
[ 0.000000] ACPI: DSDT 0EFC03F0, 37D0 (r1 M86 M861 1
INTL 2002026)
[ 0.000000] ACPI: FACS 0EFCE000, 0040
[ 0.000000] ACPI: APIC 0EFC0390, 0054 (r1 A M I OEMAPIC 7000513
MSFT 97)
[ 0.000000] ACPI: OEMB 0EFCE040, 0046 (r1 A M I AMI_OEM 7000513
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 10000000 (gap:
0f000000:f0780000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000e7000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e7000
- 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 60897
[ 0.000000] Kernel command line:
root=UUID=cd415ec6-7220-4f61-9b03-0f9765977a3e ro quiet splash xforcevesa
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1599.952 MHz processor.
[ 21.367057] Console: colour VGA+ 80x25
[ 21.367062] console [tty0] enabled
[ 21.367213] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 21.367327] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 21.372108] Memory: 231428k/245504k available (2176k kernel code,
13548k reserved, 1007k data, 368k init, 0k highmem)
[ 21.372117] virtual kernel memory layout:
[ 21.372119] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 21.372120] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.372121] vmalloc : 0xcf800000 - 0xff7fe000 ( 767 MB)
[ 21.372123] lowmem : 0xc0000000 - 0xcefc0000 ( 239 MB)
[ 21.372124] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 21.372126] .data : 0xc0320134 - 0xc041bdc4 (1007 kB)
[ 21.372127] .text : 0xc0100000 - 0xc0320134 (2176 kB)
[ 21.372131] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 21.372162] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 21.452194] Calibrating delay using timer specific routine.. 3204.10
BogoMIPS (lpj=6408209)
[ 21.452217] Security Framework initialized
[ 21.452222] SELinux: Disabled at boot.
[ 21.452236] AppArmor: AppArmor initialized
[ 21.452240] Failure registering capabilities with primary security
module.
[ 21.452249] Mount-cache hash table entries: 512
[ 21.452350] Initializing cgroup subsys ns
[ 21.452354] Initializing cgroup subsys cpuacct
[ 21.452364] CPU: After generic identify, caps: 078bfbff e3d3fbff
00000000 00000000 00000001 00000000 00000001 00000000
[ 21.452373] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 21.452376] CPU: L2 Cache: 256K (64 bytes/line)
[ 21.452378] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000
00000410 00000001 00000000 00000001 00000000
[ 21.452388] Compat vDSO mapped to ffffe000.
[ 21.452398] Checking 'hlt' instruction... OK.
[ 21.468473] SMP alternatives: switching to UP code
[ 21.469693] Freeing SMP alternatives: 11k freed
[ 21.469824] Early unpacking initramfs... done
[ 21.844138] ACPI: Core revision 20070126
[ 21.844208] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 21.846013] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[ 21.846036] Total of 1 processors activated (3204.10 BogoMIPS).
[ 21.846509] ENABLING IO-APIC IRQs
[ 21.846831] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 21.992265] Brought up 1 CPUs
[ 21.992320] CPU0 attaching sched-domain:
[ 21.992322] domain 0: span 01
[ 21.992324] groups: 01
[ 21.992499] net_namespace: 64 bytes
[ 21.992505] Booting paravirtualized kernel on bare hardware
[ 21.993020] Time: 8:07:36 Date: 06/05/08
[ 21.993045] NET: Registered protocol family 16
[ 21.993232] EISA bus registered
[ 21.993266] ACPI: bus type pci registered
[ 21.994015] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 21.994018] PCI: Using configuration type 1
[ 21.994020] Setting up standard PCI resources
[ 21.999619] ACPI: EC: Look up EC in DSDT
[ 22.004701] ACPI: Interpreter enabled
[ 22.004704] ACPI: (supports S0 S1 S3 S4 S5)
[ 22.004718] ACPI: Using IOAPIC for interrupt routing
[ 22.013957] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.014908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.015095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 22.026665] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 22.026770] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 22.026872] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 22.026974] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 22.027076] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 22.027179] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 22.027281] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 22.027383] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 22.027494] ACPI Warning (tbutils-0217): Incorrect checksum in table
[OEMB] - 06, should be F9 [20070126]
[ 22.027501] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.027532] pnp: PnP ACPI init
[ 22.027540] ACPI: bus type pnp registered
[ 22.033574] pnp: PnP ACPI: found 13 devices
[ 22.033578] ACPI: ACPI bus type pnp unregistered
[ 22.033582] PnPBIOS: Disabled by ACPI PNP
[ 22.033801] PCI: Using ACPI for IRQ routing
[ 22.033804] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 22.044240] NET: Registered protocol family 8
[ 22.044243] NET: Registered protocol family 20
[ 22.044311] AppArmor: AppArmor Filesystem Enabled
[ 22.048222] Time: tsc clocksource has been installed.
[ 22.056266] system 00:09: ioport range 0x290-0x297 has been reserved
[ 22.056269] system 00:09: ioport range 0xc02-0xc05 has been reserved
[ 22.056272] system 00:09: ioport range 0x3e0-0x3e7 has been reserved
[ 22.056275] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 22.056278] system 00:09: ioport range 0x800-0x87f has been reserved
[ 22.056281] system 00:09: ioport range 0x400-0x41f has been reserved
[ 22.056285] system 00:09: iomem range 0xfff80000-0xffffffff could not
be reserved
[ 22.056292] system 00:0a: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 22.056296] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 22.056303] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 22.056306] system 00:0c: iomem range 0x0-0x0 could not be reserved
[ 22.056309] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
[ 22.056312] system 00:0c: iomem range 0x100000-0xfffffff could not be
reserved
[ 22.056315] system 00:0c: iomem range 0x0-0x0 could not be reserved
[ 22.086730] PCI: Bridge: 0000:00:01.0
[ 22.086732] IO window: disabled.
[ 22.086737] MEM window: fca00000-feafffff
[ 22.086741] PREFETCH window: f4900000-fc8fffff
[ 22.086760] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 22.086773] NET: Registered protocol family 2
[ 22.124305] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 22.124536] TCP established hash table entries: 8192 (order: 4, 65536
bytes)
[ 22.124595] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 22.124649] TCP: Hash tables configured (established 8192 bind 8192)
[ 22.124652] TCP reno registered
[ 22.136348] checking if image is initramfs... it is
[ 22.588247] Switched to high resolution mode on CPU 0
[ 22.863773] Freeing initrd memory: 7284k freed
[ 22.864407] audit: initializing netlink socket (disabled)
[ 22.864418] audit(1212653256.388:1): initialized
[ 22.866362] VFS: Disk quotas dquot_6.5.1
[ 22.866436] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.866570] io scheduler noop registered
[ 22.866572] io scheduler anticipatory registered
[ 22.866574] io scheduler deadline registered
[ 22.866586] io scheduler cfq registered (default)
[ 22.866600] PCI: VIA PCI bridge detected. Disabling DAC.
[ 22.866671] Boot video device is 0000:01:00.0
[ 22.866938] isapnp: Scanning for PnP cards...
[ 23.220904] isapnp: No Plug & Play device found
[ 23.250519] Real Time Clock Driver v1.12ac
[ 23.250616] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 23.250728] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.251375] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.252127] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 23.252198] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 23.252295] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 23.252688] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.252693] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.256373] mice: PS/2 mouse device common for all mice
[ 23.256498] EISA: Probing bus 0 at eisa.0
[ 23.256534] EISA: Detected 0 cards.
[ 23.256537] cpuidle: using governor ladder
[ 23.256539] cpuidle: using governor menu
[ 23.256633] NET: Registered protocol family 1
[ 23.256660] Using IPI No-Shortcut mode
[ 23.256692] registered taskstats version 1
[ 23.256790] Magic number: 12:285:118
[ 23.256964] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 23.256966] EDD information not available.
[ 23.257233] Freeing unused kernel memory: 368k freed
[ 23.284132] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 24.511481] fuse init (API version 7.9)
[ 24.533337] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 25.209591] SCSI subsystem initialized
[ 25.275911] libata version 3.00 loaded.
[ 25.288031] usbcore: registered new interface driver usbfs
[ 25.288053] usbcore: registered new interface driver hub
[ 25.296068] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level,
low) -> IRQ 16
[ 25.296129] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 25.315838] usbcore: registered new device driver usb
[ 25.342254] pata_via 0000:00:0f.0: version 0.3.3
[ 25.342278] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level,
low) -> IRQ 16
[ 25.359947] scsi0 : pata_via
[ 25.367988] USB Universal Host Controller Interface driver v3.0
[ 25.382194] scsi1 : pata_via
[ 25.384055] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 25.384059] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 25.416885] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 25.516067] Floppy drive(s): fd0 is 1.44M
[ 25.535818] FDC 0 is a post-1991 82077
[ 25.712383] ata1.00: ATA-7: SAMSUNG SP0802N, TK200-04, max UDMA/100
[ 25.712388] ata1.00: 156368016 sectors, multi 16: LBA48
[ 25.712410] ata1.01: ATAPI: HL-DT-ST GCE-8527B, 1.04, max UDMA/33
[ 25.720248] ata1.00: configured for UDMA/100
[ 25.908136] ata1.01: configured for UDMA/33
[ 26.075248] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0802N
TK20 PQ: 0 ANSI: 5
[ 26.075615] scsi 0:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8527B
1.04 PQ: 0 ANSI: 5
[ 26.075826] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level,
low) -> IRQ 17
[ 26.075838] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 26.076108] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 26.076140] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 26.076284] usb usb1: configuration #1 chosen from 1 choice
[ 26.076307] hub 1-0:1.0: USB hub found
[ 26.076313] hub 1-0:1.0: 2 ports detected
[ 26.135206] Driver 'sd' needs updating - please use bus_type methods
[ 26.135297] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors
(80060 MB)
[ 26.135312] sd 0:0:0:0: [sda] Write Protect is off
[ 26.135315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.135334] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 26.135384] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors
(80060 MB)
[ 26.135394] sd 0:0:0:0: [sda] Write Protect is off
[ 26.135397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.135414] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 26.135418] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 26.158393] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 26.158398] ata1.00: BMDMA stat 0x64
[ 26.158405] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 26.158407] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 26.158410] ata1.00: status: { DRDY ERR }
[ 26.158412] ata1.00: error: { ICRC ABRT }
[ 26.158434] ata1: soft resetting link
[ 26.179975] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level,
low) -> IRQ 17
[ 26.179985] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 26.180008] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 26.180031] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 26.180139] usb usb2: configuration #1 chosen from 1 choice
[ 26.180161] hub 2-0:1.0: USB hub found
[ 26.180166] hub 2-0:1.0: 2 ports detected
[ 26.283973] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level,
low) -> IRQ 17
[ 26.283986] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 26.284009] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[ 26.284032] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 26.284142] usb usb3: configuration #1 chosen from 1 choice
[ 26.284169] hub 3-0:1.0: USB hub found
[ 26.284174] hub 3-0:1.0: 2 ports detected
[ 26.387953] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level,
low) -> IRQ 17
[ 26.387966] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 26.387990] uhci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[ 26.388012] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000ec00
[ 26.388130] usb usb4: configuration #1 chosen from 1 choice
[ 26.388153] hub 4-0:1.0: USB hub found
[ 26.388158] hub 4-0:1.0: 2 ports detected
[ 26.492299] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level,
low) -> IRQ 17
[ 26.492315] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 26.492360] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
bus number 5
[ 26.492400] ehci_hcd 0000:00:10.4: irq 17, io mem 0xfebff400
[ 26.494370] ata1.00: configured for UDMA/100
[ 26.503873] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 26.503997] usb usb5: configuration #1 chosen from 1 choice
[ 26.504021] hub 5-0:1.0: USB hub found
[ 26.504028] hub 5-0:1.0: 8 ports detected
[ 26.608038] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level,
low) -> IRQ 18
[ 26.612220] eth0: VIA Rhine II at 0xfebffc00, 00:14:2a:1d:67:1e, IRQ 18.
[ 26.612930] eth0: MII PHY found at address 1, status 0x786d
advertising 05e1 Link 45e1.
[ 26.680047] ata1.01: configured for UDMA/33
[ 26.680064] ata1: EH complete
[ 26.683747] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 26.683751] ata1.00: BMDMA stat 0x64
[ 26.683758] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 26.683760] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 26.683763] ata1.00: status: { DRDY ERR }
[ 26.683765] ata1.00: error: { ICRC ABRT }
[ 26.683787] ata1: soft resetting link
[ 27.020097] ata1.00: configured for UDMA/100
[ 27.208000] ata1.01: configured for UDMA/33
[ 27.208016] ata1: EH complete
[ 27.217441] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 27.217444] ata1.00: BMDMA stat 0x64
[ 27.217451] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 27.217452] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 27.217456] ata1.00: status: { DRDY ERR }
[ 27.217458] ata1.00: error: { ICRC ABRT }
[ 27.217479] ata1: soft resetting link
[ 27.552052] ata1.00: configured for UDMA/100
[ 27.739955] ata1.01: configured for UDMA/33
[ 27.739971] ata1: EH complete
[ 27.742798] ata1.00: limiting speed to UDMA/66:PIO4
[ 27.742802] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 27.742805] ata1.00: BMDMA stat 0x64
[ 27.742811] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 27.742813] res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask
0x10 (ATA bus error)
[ 27.742816] ata1.00: status: { DRDY ERR }
[ 27.742818] ata1.00: error: { ICRC ABRT }
[ 27.742839] ata1: soft resetting link
[ 28.076033] ata1.00: configured for UDMA/66
[ 28.263908] ata1.01: configured for UDMA/33
[ 28.263923] ata1: EH complete
[ 28.267953] sda1 sda2 sda3
[ 28.308165] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.308278] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors
(80060 MB)
[ 28.308986] sd 0:0:0:0: [sda] Write Protect is off
[ 28.308991] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.314574] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 28.314660] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.314678] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 28.315632] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors
(80060 MB)
[ 28.316156] sd 0:0:0:0: [sda] Write Protect is off
[ 28.316161] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.318639] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 28.318645] Uniform CD-ROM driver Revision: 3.20
[ 28.318702] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 28.318792] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 28.736455] Attempting manual resume
[ 28.736459] swsusp: Resume From Partition 8:3
[ 28.736462] PM: Checking swsusp image.
[ 28.741912] PM: Resume from disk failed.
[ 28.772589] kjournald starting. Commit interval 5 seconds
[ 28.772603] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.306762] Linux agpgart interface v0.102
[ 39.336139] agpgart: Detected AGP bridge 0
[ 39.338377] agpgart: AGP aperture is 64M @ 0xd0000000
[ 39.390769] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.435453] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 40.162771] input: Power Button (FF) as /devices/virtual/input/input2
[ 40.174679] ACPI: Power Button (FF) [PWRF]
[ 40.174783] input: Sleep Button (CM) as /devices/virtual/input/input3
[ 40.190664] ACPI: Sleep Button (CM) [SLPB]
[ 40.190751] input: Power Button (CM) as /devices/virtual/input/input4
[ 40.206666] ACPI: Power Button (CM) [PWRB]
[ 40.700659] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level,
low) -> IRQ 19
[ 40.700800] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 41.175457] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 41.215779] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level,
low) -> IRQ 19
[ 41.218562] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 41.883041] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 42.540163] parport_pc 00:08: reported by Plug and Play ACPI
[ 42.540213] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 42.813477] NET: Registered protocol family 10
[ 42.813706] lo: Disabled Privacy Extensions
[ 43.395505] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input6
[ 45.042513] lp0: using parport0 (interrupt-driven).
[ 45.100716] Adding 1036184k swap on /dev/sda3. Priority:-1 extents:1
across:1036184k
[ 45.659976] EXT3 FS on sda2, internal journal
[ 47.274100] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 47.703441] No dock devices found.
[ 48.136874] powernow-k8: Power state transitions not supported
[ 48.925841] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 48.925847] apm: overridden by ACPI.
[ 49.044475] ppdev: user-space parallel port driver
[ 49.236146] audit(1212667683.311:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4869 profile="/usr/sbin/cupsd" namespace="default"
[ 51.316641] Bluetooth: Core ver 2.11
[ 51.317244] NET: Registered protocol family 31
[ 51.317249] Bluetooth: HCI device and connection manager initialized
[ 51.317254] Bluetooth: HCI socket layer initialized
[ 51.365713] Bluetooth: L2CAP ver 2.9
[ 51.365719] Bluetooth: L2CAP socket layer initialized
[ 51.436773] Bluetooth: RFCOMM socket layer initialized
[ 51.437006] Bluetooth: RFCOMM TTY layer initialized
[ 51.437009] Bluetooth: RFCOMM ver 1.8
[ 53.265504] eth0: no IPv6 routers present
[ 9884.644920] DMA write timed out
[12523.778984] DMA write timed out
[13633.682283] DMA write timed out
Más información sobre la lista de distribución ubuntu-es