connexion internet au démarrage (dhcp + free) test sur ma machine
Philbur
philbur at worldcom.ch
Sam 9 Sep 14:36:18 UTC 2006
Pas de quoi .
un truc encore..des fois ça marche ,deconnecter le modem (prise
secteur) attendre 30 secondes ..et rebrancher !!!
sinon tiens moi au courant le pb m'interesse.
Philbur
Nicolas Geraud a écrit :
> merci d'avoir passé du temps pour moi ;)
>
>
> Le 09/09/06, *Philbur* <philbur at worldcom.ch
> <mailto:philbur at worldcom.ch>> a écrit :
>
>
>
> Cette configuration fonctionne sur mes 2 machines ...? c'est p
> être un
> pb matériel, carte ou routeur . Essaye de refaire toute la
> configuration
> sinon , changer la carte
>
> Philbur
>
>
>
> Nicolas Geraud a écrit :
> > *IP freebox* 192.168. .
> >
> > *DHCP activé* Oui Non
> >
> > *Debut DHCP* 192.168. .
> > *Fin DHCP* 192.168. .
> >
> > *Ip DMZ* 192.168. .
> > *Ip du Freeplayer* 192.168. .
> >
> > *Réponse au ping*
> > *Proxy WOL (Wake On Lan) activé*
> >
> >
> > *Redirections de ports:*
> > Port Protocole Destination Port
> > 192.168. .
> > 192.168. .
> > 192.168. .
> > 192.168. .
> > 192.168. .
> > 192.168. .
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > *Baux DHCP permanents:*
> > IP Adresse MAC
> > 192.168. adresse mac de mon pc
> > 192.168. adresse mac de mon serveur
> > 192.168. adresse mac de ma xbox
> >
> >
> >
> > Le 07/09/06, *Philbur* <philbur at worldcom.ch
> <mailto:philbur at worldcom.ch>
> > <mailto: philbur at worldcom.ch <mailto:philbur at worldcom.ch>>> a
> écrit :
> >
> >
> >
> > Pas sûr !
> >
> > question: peux - tu verifier la configuration du DHCP DU
> ROUTEUR ?
> >
> > il faut entrer dans le routeur
> >
> > Philbur
> >
> > Nicolas Geraud a écrit :
> > > Salut,
> > > j'avais déjà donné quelques infos, les revoici
> > >
> > > Je viens de booter, j'ai pas de réseau voici les commandes :
> > >
> > > 21:10 mulot at bunty ~% cat /etc/network/interfaces
> > > auto lo
> > > iface lo inet loopback
> > >
> > > auto eth0
> > > iface eth0 inet dhcp
> > >
> > > 21:10 mulot at bunty ~% ifconfig
> > > eth0 Lien encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
> > > adr inet6: fe80::211:2fff:feba:5c56/64 Scope:Lien
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
> > > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 lg file transmission:1000
> > > Octets reçus:0 ( 0.0 b) Octets transmis:468
> (468.0 b)
> > > Interruption:185 Adresse de base:0xc000
> > >
> > > lo Lien encap:Boucle locale
> > > inet adr:127.0.0.1 <http://127.0.0.1> <
> http://127.0.0.1> <
> > http://127.0.0.1> Masque:255.0.0.0 <http://255.0.0.0>
> <http://255.0.0.0 >
> > > <http://255.0.0.0>
> > > adr inet6: ::1/128 Scope:Hôte
> > > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > > Packets reçus:624 erreurs:0 :0 overruns:0 frame:0
> > > TX packets:624 errors:0 dropped:0 overruns:0
> carrier:0
> > > collisions:0 lg file transmission:0
> > > Octets reçus:241805 ( 236.1 KiB) Octets
> transmis:241805
> > > (236.1 KiB)
> > >
> > >
> > > Donc pour corriger tout ca je fais ce qui suit :
> > >
> > > 21:10 mulot at bunty ~% sudo ifdown eth0
> > > Password:
> > > Internet Systems Consortium DHCP Client V3.0.3
> > > Copyright 2004-2005 Internet Systems Consortium.
> > > All rights reserved.
> > > For info, please visit http://www.isc.org/products/DHCP
> > >
> > > Listening on LPF/eth0/XX:XX:XX:XX:XX:XX
> > > Sending on LPF/eth0/XX:XX:XX:XX:XX:XX
> > > Sending on Socket/fallback
> > > DHCPRELEASE on eth0 to 192.168.0.254
> <http://192.168.0.254> <http://192.168.0.254>
> > <http://192.168.0.254 <http://192.168.0.254
> <http://192.168.0.254>>> port 67
> > >
> > > 21:11 mulot at bunty ~% sudo ifup eth0
> > > Internet Systems Consortium DHCP Client V3.0.3
> > > Copyright 2004-2005 Internet Systems Consortium.
> > > All rights reserved.
> > > For info, please visit http://www.isc.org/products/DHCP
> > > <http://www.isc.org/products/DHCP
> <http://www.isc.org/products/DHCP>>
> > >
> > > Listening on LPF/eth0/XX:XX:XX:XX:XX:XX
> > > Sending on LPF/eth0/XX:XX:XX:XX:XX:XX
> > > Sending on Socket/fallback
> > > DHCPDISCOVER on eth0 to 255.255.255.255
> <http://255.255.255.255> <http://255.255.255.255>
> > <http://255.255.255.255 < http://255.255.255.255>> port
> > > 67 interval 6
> > > DHCPOFFER from 192.168.0.254 <http://192.168.0.254>
> <http://192.168.0.254>
> > < http://192.168.0.254>
> > > DHCPREQUEST on eth0 to 255.255.255.255
> <http://255.255.255.255> <http://255.255.255.255>
> > <http://255.255.255.255> port 67
> > > DHCPACK from 192.168.0.254 <http://192.168.0.254>
> <http://192.168.0.254 >
> > <http://192.168.0.254 <http://192.168.0.254>>
> > > bound to 192.168.0.1 <http://192.168.0.1> <
> http://192.168.0.1> <http://192.168.0.1>
> > -- renewal in 374600 seconds.
> > >
> > > 21:11 mulot at bunty ~% ifconfig
> > > eth0 Lien encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
> > > inet adr:192.168.0.1 <http://192.168.0.1>
> <http://192.168.0.1>
> > <http://192.168.0.1>
> > > Bcast: 192.168.0.255 <http://192.168.0.255>
> <http://192.168.0.255> <
> > http://192.168.0.255> Masque: 255.255.255.0
> <http://255.255.255.0> <http://255.255.255.0>
> > > <http://255.255.255.0>
> > > adr inet6: fe80::211:2fff:feba:5c56/64 Scope:Lien
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > Packets reçus:80 erreurs:0 :0 overruns:0 frame:0
> > > TX packets:104 errors:0 dropped:0 overruns:0
> carrier:0
> > > collisions:0 lg file transmission:1000
> > > Octets reçus:15188 (14.8 KiB) Octets transmis:11638
> > (11.3 KiB)
> > > Interruption:185 Adresse de base:0xc000
> > >
> > > lo Lien encap:Boucle locale
> > > inet adr: 127.0.0.1 <http://127.0.0.1>
> <http://127.0.0.1>
> > < http://127.0.0.1> Masque:255.0.0.0 <http://255.0.0.0>
> <http://255.0.0.0>
> > > <http://255.0.0.0>
> > > adr inet6: ::1/128 Scope:Hôte
> > > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > > Packets reçus:1038 erreurs:0 :0 overruns:0 frame:0
> > > TX packets:1038 errors:0 dropped:0 overruns:0
> carrier:0
> > > collisions:0 lg file transmission:0
> > > Octets reçus:404477 (394.9 KiB) Octets
> transmis:404477
> > > (394.9 KiB)
> > >
> > >
> > > Voilou, tout m'a pourtant l'air correctement configuré ...
> > >
> > >
> > > Le 06/09/06, *Philbur* < philbur at worldcom.ch
> <mailto:philbur at worldcom.ch>
> > <mailto:philbur at worldcom.ch <mailto:philbur at worldcom.ch> >
> > > <mailto:philbur at worldcom.ch <mailto:philbur at worldcom.ch>
> <mailto:philbur at worldcom.ch <mailto:philbur at worldcom.ch>>>> a écrit :
> > >
> > >
> > >
> > >
> > > suite
> > > exemple
> > >
> > >
> > > 1.1. Ethernet
> > > La plus grande partie de la configuration
> d'ethernet est
> > > dans un seul fichier :
> > > /etc/network/interfaces. Si vous n'avez pas de
> > > périphérique ethernet, seule l'interface
> > > de boucle locale sera dans ce fichier, qui
> ressemblera à
> > > ceci :
> > > # This file describes the network interfaces
> > available on
> > > your system
> > > # and how to activate them. For more
> information, see
> > > interfaces(5).
> > > # The loopback network interface
> > >
> > > auto lo
> > > iface lo inet loopback
> > > address 127.0.0.1 <http://127.0.0.1>
> <http://127.0.0.1> <http://127.0.0.1>
> > > netmask 255.0.0.0 <http://255.0.0.0>
> <http://255.0.0.0> < http://255.0.0.0>
> > > * Si vous n'avez qu'un périphérique, eth0, qu'il
> > obtient sa
> > > configuration depuis un serveur
> > > DHCP et qu'il doit être activé au démarrage,
> > seulement 2
> > > lignes supplémentaires sont
> > > nécessaires :*
> > > *
> > > auto eth0
> > > iface eth0 inet dhcp*
> > >
> > > La première ligne précise que le périphérique
> doit être
> > > automatiquement activé au
> > > démarrage. La deuxième ligne précise que cette
> interface
> > > (« iface ») eth0 doit avoir un
> > > adressage IPv4 (remplacer « inet » par « inet6 »
> > pour un
> > > périphérique IPv6) et qu'elle
> > > doit être configurée automatiquement par DHCP. En
> > > supposant que votre réseau et
> > > votre serveur DHCP sont correctement configurés,
> > vous ne
> > > devriez pas avoir besoin de
> > > configuration supplémentaire. Le serveur DHCP
> > fournira la
> > > passerelle par défaut (via la
> > > comande route), l'adresse IP du périphérique
> (via la
> > > commande ifconfig), et les serveurs
> > > DNS (dans le fichier /etc/resolv.conf).
> > >
> > >
> > > Philbur
> > >
> > >
> > >
> > >
> > > Nicolas Geraud a écrit :
> > >> Pardon pour le retard de ma reponse, bcp de boulot.
> > >>
> > >> Francois> Hello, étant en DHCP, je n'ai aucune ip a
> > préciser, c a
> > >> ma machine de lancer une requete en broadcast pour
> > recuperer son ip
> > >>
> > >> Philbur> ces infos concernent le wifi et je suis en
> > filaire. J'ai
> > >> regarde tout de mm mais je ne vois rien ressemblant a mon
> > soucis.
> > >>
> > >> Sinon je viens de constater, en lancant l'outil graphique
> > >> network-admin, que le périphérique par défaut de la
> passerelle
> > >> est vide lorsque ma connexion ne fonctionne pas.
> > >> J'ai tenté de selectionner eth0 ds la combo mais ca n'a
> > rien changé.
> > >> Un petit coup de ifdown/ifup, je relance
> network-admin, et
> > la je
> > >> vois bien eth0 selectionné ds la combo.
> > >>
> > >> Savez comment fixer ca?
> > >>
> > >> merci
> > >>
> > >>
> > >> Le 31/08/06, *Philbur* < philbur at worldcom.ch
> <mailto:philbur at worldcom.ch>
> > <mailto:philbur at worldcom.ch <mailto:philbur at worldcom.ch>>
> > >> <mailto:philbur at worldcom.ch
> <mailto:philbur at worldcom.ch> <mailto: philbur at worldcom.ch
> <mailto:philbur at worldcom.ch>>> >
> > a écrit :
> > >>
> > >> RE HELP ! <
> https://help.ubuntu.com/community/WIfiDocs/
> <https://help.ubuntu.com/community/WIfiDocs/>>
> > >>
> > >> Philbur
> > >>
> > >> Nicolas Geraud a écrit :
> > >> > Bonjour à tous.
> > >> >
> > >> > Depuis peu j'ai reconfiguré ma freebox pour qu'elle
> > fasse
> > >> office de
> > >> > serveur DHCP tout en donnant une association IP
> fixe
> > / @ mac aux
> > >> > machines de mon sous-réseau.
> > >> >
> > >> > Mais depuis ce changement, lors de la majorité
> de mes
> > boots,
> > >> je n'ai
> > >> > pas de réseau (mais eth0 est bien monté).
> > >> >
> > >> > je dois donc faire un petit coup de :
> > >> > $> sudo ifdown eth0
> > >> > $> sudo ifup eth0
> > >> >
> > >> >
> > >> > quelqu'un aurait il une piste?
> > >> >
> > >> > Pour info :
> > >> >
> > >> > ~% cat /etc/network/interfaces
> > >> > auto lo
> > >> > iface lo inet loopback
> > >> >
> > >> > auto eth0
> > >> > iface eth0 inet dhcp
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > merci
> > >>
> > >>
> > >
> > >
> >
> >
>
>
Plus d'informations sur la liste de diffusion ubuntu-fr