L'activité de mon disque dur m'inquiète !
Lami René
lami at webestrie.com
Mar 4 Déc 19:19:29 UTC 2007
Sun Wukong (ML Ubuntu-fr) a écrit :
> Le 03.12.2007 18:11,, le perspicace Lami René s'exprimait en ces termes:
>
>> De mémoire, je l'ai produit en suivant une recommandation trouvée sur le
>> Web pour s'assurer que le pare-feu soit activé, malgré la séquence de
>> démarrage habituellement désordonné (semble-t-il) de Linux Kubuntu, le
>> pare-feu serait lancé avant que la connexion soit établie avec la carte
>> réseau.
>>
> Peut-être, mais ce fichier ne doit pas être relancé régulièrement : une
> fois seulement au lancement de la session, dans le fichier .profile par
> exemple. Un meilleur admin que moi, c'est facile ;-) , pourra conseiller
> un endroit plus propice.
> Mais sûrement pas dans la crontab, toutes les 2 minutes…
>
Bonjour Sun Wukong,
Merci bien pour votre aide !
Je suis d'accord avec vous. J'ai retiré le lancement de firestarter de
la crontab avec gcrontab et il n'y a plus rien dans le contab, c'était
le seul lancement qu'il y avait.
J'ai regardé le contenu du fichier « .profile », dois-je y recopier le
contenu du fichier de « .start_firestarter », ou ajouté une simple ligne
dans le « .profile » pour lancer « .start_firestarter » ? Quelle serait
cette ligne à ajouter ?
> Pour éditer la crontab: euh... google ubuntu crontab, 2ème résultat ;-)
> http://doc.ubuntu-fr.org/cron
>
Merci d'avoir pris le temps pour cette recherche, cela est très apprécié !
>> Comme vous pensez que le problème est là, j'ai suivi votre
>> recommandation et j'ai renommé le fichier en .start_firestarterr, un r
>> de plus à la fin du nom et j'ai redémarré l'ordinateur.
>>
> Mais le processus cron ira toujours chercher sur le disque toutes les 2
> minutes un fichier .start_firestarter… Il faut quand même supprimer
> cette entrée dans la crontab
>
>> J'ai toujours la lumière des activités de disque dur qui clignote au 2 à
>> 4 secondes, même actuellement. J'ai comme programme de lancé une konsole
>> avec la commande tail -f /var/log/syslog, un Konqueror et Thunderbird
>> pour la rédaction du présent courriel.
>>
> Si tu veux mesurer ce genre de choses, il faut fermer tous ces
> programmes. TB va chercher le courrier régulièrement sur les serveurs,
> Konqueror peut rafraichir une page web régulièrement… Tout ça fausse ou
> complique l'analyse.
>
Dans Thunderbird, j'avais 4 comptes qui étaient vérifier toutes les 5
minutes, je viens de changer cela pour 30 minutes. Selon vous, quel
serait l'intervalle idéal pour la vérification du courriel ?
>> Je suis prêt a suivre vos instructions pour modifier la crontable.
>> Comment procéder ?
>>
> voir + haut
>
>> Je profite de l'occasion pour recopier ici les (WW) warning, (EE) error,
>> Il n'y à pas d'autre message d'erreur dans ce fichier de log.
>>
> aucune influence
>
Ok, merci !
Comme une autre personne me l'a suggéré :
> je dis une grosse connerie, mais en essayant en désactiver la gestion
> de l'ACPI par un acpi=off noapic nolapic dans les options du kernel au
> démarrage pour éliminer les erreur de gestion de l'énergie, qu'est-ce
> que ça donne pour les HD ?
J'ai cherché dans la configuration du système et j'ai trouvé dans «
System Services », « acpid », que j'ai arrêté et décoché pour son
lancement au démarrage du système. J'ai redémarré l'ordinateur, mais
cela ne semble ne rien changer.
Le problème reste toujours entier !
>> J'ai noté des [fail] dans la console F1 au lancement du système, mais je
>> n'ai pas eu le temps de bien les voir et de bien les notés. Dans quel
>> fichier pourrais-je trouver la trace des messages du déroulement du
>> lancement du système ?
>>
> dans la console :
> rene at ubuntu:~$ dmesg
Je ne sais pas comment utiliser ces information, mais voici ce que donne
la commande dmesg :
[ 0.000000] Linux version 2.6.22-14-generic (buildd at palmer) (gcc
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun
Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dfb00000)
[ 0.000000] Built 1 zonelists. Total pages: 130033
[ 0.000000] Kernel command line: root=/dev/sda3 ro locale=fr_FR
acpi=off noapic nolapic
[ 0.000000] mapped APIC to ffffd000 (0140c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 937.874 MHz processor.
[ 129.725227] Console: colour VGA+ 80x25
[ 129.727269] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 129.728402] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 129.771676] Memory: 508172k/524224k available (2015k kernel code,
15492k reserved, 916k data, 364k init, 0k highmem)
[ 129.771758] virtual kernel memory layout:
[ 129.771761] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 129.771764] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 129.771767] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 129.771771] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 129.771774] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 129.771777] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 129.771780] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 129.772144] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 129.772311] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 129.852334] Calibrating delay using timer specific routine.. 1877.24
BogoMIPS (lpj=3754493)
[ 129.852476] Security Framework v1.0.0 initialized
[ 129.852536] SELinux: Disabled at boot.
[ 129.852612] Mount-cache hash table entries: 512
[ 129.852898] CPU: After generic identify, caps: 0387f9ff 00000000
00000000 00000000 00000000 00000000 00000000
[ 129.852921] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 129.853006] CPU: L2 cache: 256K
[ 129.853055] CPU serial number disabled.
[ 129.853104] CPU: After all inits, caps: 0383f9ff 00000000 00000000
00000040 00000000 00000000 00000000
[ 129.853126] Compat vDSO mapped to ffffe000.
[ 129.853198] Checking 'hlt' instruction... OK.
[ 129.868557] SMP alternatives: switching to UP code
[ 129.868928] Freeing SMP alternatives: 11k freed
[ 129.869557] Early unpacking initramfs... done
[ 130.580551] CPU0: Intel Pentium III (Coppermine) stepping 0a
[ 130.580714] SMP motherboard not detected.
[ 130.580763] Local APIC not detected. Using dummy APIC emulation.
[ 130.580903] Brought up 1 CPUs
[ 130.581238] Booting paravirtualized kernel on bare hardware
[ 130.581404] Time: 14:01:32 Date: 11/04/107
[ 130.581515] NET: Registered protocol family 16
[ 130.581814] EISA bus registered
[ 130.606016] PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=2
[ 130.606068] PCI: Using configuration type 1
[ 130.606116] Setting up standard PCI resources
[ 130.610446] ACPI: Interpreter disabled.
[ 130.610505] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 130.610569] pnp: PnP ACPI: disabled
[ 130.610622] PnPBIOS: Scanning system for PnP BIOS support...
[ 130.610937] PnPBIOS: Found PnP BIOS installation structure at 0xc00fba80
[ 130.610990] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbab0, dseg
0xf0000
[ 130.613092] PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver
[ 130.613280] PCI: Probing PCI hardware
[ 130.613340] PCI: Probing PCI hardware (bus 00)
[ 130.613635] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 130.613690] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 130.614445] PCI: Transparent bridge - 0000:00:1e.0
[ 130.616148] PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
[ 130.616232] PCI: setting IRQ 5 as level-triggered
[ 130.616238] PCI: Found IRQ 5 for device 0000:00:1f.3
[ 130.616304] PCI: Sharing IRQ 5 with 0000:00:1f.5
[ 130.616366] PCI: Sharing IRQ 5 with 0000:02:05.0
[ 130.630981] NET: Registered protocol family 8
[ 130.631030] NET: Registered protocol family 20
[ 130.631272] pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 130.631328] pnp: 00:08: iomem range 0xffb00000-0xffb7ffff could not
be reserved
[ 130.631388] pnp: 00:08: iomem range 0xfff00000-0xffffffff could not
be reserved
[ 130.631447] pnp: 00:08: iomem range 0xe0000-0xeffff has been reserved
[ 130.631506] pnp: 00:09: iomem range 0xf0000-0xf3fff could not be reserved
[ 130.631559] pnp: 00:09: iomem range 0xf4000-0xf7fff could not be reserved
[ 130.631611] pnp: 00:09: iomem range 0xf8000-0xfffff could not be reserved
[ 130.631663] pnp: 00:09: iomem range 0xcc800-0xcffff has been reserved
[ 130.631723] pnp: 00:0d: ioport range 0x3f0-0x3f1 has been reserved
[ 130.631785] Time: tsc clocksource has been installed.
[ 130.632555] PCI: Bridge: 0000:00:01.0
[ 130.632608] IO window: disabled.
[ 130.632659] MEM window: dc000000-ddffffff
[ 130.632709] PREFETCH window: d0000000-d7ffffff
[ 130.632762] PCI: Bridge: 0000:00:1e.0
[ 130.632811] IO window: c000-cfff
[ 130.632862] MEM window: de000000-dfffffff
[ 130.632912] PREFETCH window: 30000000-300fffff
[ 130.632981] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 130.633011] NET: Registered protocol family 2
[ 130.659861] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 130.660037] TCP established hash table entries: 16384 (order: 5,
196608 bytes)
[ 130.660707] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 130.661294] TCP: Hash tables configured (established 16384 bind 16384)
[ 130.661351] TCP reno registered
[ 130.672081] checking if image is initramfs... it is
[ 132.012780] Freeing initrd memory: 7118k freed
[ 132.013607] audit: initializing netlink socket (disabled)
[ 132.013691] audit(1196776892.864:1): initialized
[ 132.018654] VFS: Disk quotas dquot_6.5.1
[ 132.018916] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 132.019347] io scheduler noop registered
[ 132.019401] io scheduler anticipatory registered
[ 132.019449] io scheduler deadline registered
[ 132.019543] io scheduler cfq registered (default)
[ 132.019659] Boot video device is 0000:01:00.0
[ 132.019983] isapnp: Scanning for PnP cards...
[ 132.373621] isapnp: No Plug & Play device found
[ 132.440767] Real Time Clock Driver v1.12ac
[ 132.440969] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 132.441143] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 132.441558] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 132.443038] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 132.443675] 00:12: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 132.445376] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 132.445951] input: Macintosh mouse button emulation as
/class/input/input0
[ 132.446200] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 132.448709] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 132.448771] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 132.449216] mice: PS/2 mouse device common for all mice
[ 132.449499] EISA: Probing bus 0 at eisa.0
[ 132.449574] Cannot allocate resource for EISA slot 4
[ 132.449624] Cannot allocate resource for EISA slot 5
[ 132.449685] EISA: Detected 0 cards.
[ 132.449940] TCP cubic registered
[ 132.450018] NET: Registered protocol family 1
[ 132.450120] Using IPI No-Shortcut mode
[ 132.450366] Magic number: 3:781:29
[ 132.450453] hash matches device ttydc
[ 132.451709] Freeing unused kernel memory: 364k freed
[ 132.478516] input: AT Translated Set 2 keyboard as /class/input/input1
[ 132.883822] AppArmor: AppArmor
initialized<5>audit(1196776893.864:2): type=1505 info="AppArmor
initialized" pid=1110
[ 132.904958] fuse init (API version 7.8)
[ 132.919704] Failure registering capabilities with primary security
module.
[ 132.983936] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 134.296197] usbcore: registered new interface driver usbfs
[ 134.296306] usbcore: registered new interface driver hub
[ 134.296412] usbcore: registered new device driver usb
[ 134.299602] USB Universal Host Controller Interface driver v3.0
[ 134.299800] PCI: setting IRQ 11 as level-triggered
[ 134.299807] PCI: Found IRQ 11 for device 0000:00:1f.2
[ 134.299886] PCI: Sharing IRQ 11 with 0000:02:03.0
[ 134.299955] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 134.299963] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 134.300225] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned
bus number 1
[ 134.300318] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
[ 134.300642] usb usb1: configuration #1 chosen from 1 choice
[ 134.300747] hub 1-0:1.0: USB hub found
[ 134.300807] hub 1-0:1.0: 2 ports detected
[ 134.401277] PCI: Found IRQ 11 for device 0000:00:1f.4
[ 134.401387] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 134.401395] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 134.401490] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned
bus number 2
[ 134.401577] uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000d400
[ 134.401855] usb usb2: configuration #1 chosen from 1 choice
[ 134.401968] hub 2-0:1.0: USB hub found
[ 134.402031] hub 2-0:1.0: 2 ports detected
[ 134.448487] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 134.541714] SCSI subsystem initialized
[ 134.562188] libata version 2.21 loaded.
[ 134.568214] ata_piix 0000:00:1f.1: version 2.11
[ 134.568336] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 134.568563] scsi0 : ata_piix
[ 134.568717] scsi1 : ata_piix
[ 134.568819] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x0001f000 irq 14
[ 134.568915] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376
bmdma 0x0001f008 irq 15
[ 134.598863] PCI: Found IRQ 11 for device 0000:02:04.0
[ 137.868024] scsi2 : AdvanSys SCSI 3.3K: PCI Ultra: IO 0xC400-0xC40F,
IRQ 0xB
[ 137.885127] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 137.885193] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 137.922916] ata1.00: ATA-7: ST3250620A, 3.AAE, max UDMA/100
[ 137.922980] ata1.00: 488397168 sectors, multi 16: LBA48
[ 137.989416] ata1.00: configured for UDMA/100
[ 138.248801] Floppy drive(s): fd0 is 1.44M
[ 138.335684] FDC 0 is a post-1991 82077
[ 138.462301] ata2.00: ATAPI: HL-DT-ST GCE-8520B, 1.00, max UDMA/33
[ 138.462374] ata2.01: ATAPI: SONY DVD RW DRU-830A, SS23, max UDMA/66
[ 138.462433] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 138.626191] ata2.00: configured for UDMA/33
[ 138.797918] ata2.01: configured for UDMA/33
[ 138.798014] scsi: waiting for bus probes to complete ...
[ 139.738139] scsi 0:0:0:0: Direct-Access ATA ST3250620A
3.AA PQ: 0 ANSI: 5
[ 139.739364] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8520B
1.00 PQ: 0 ANSI: 5
[ 139.741075] scsi 1:0:1:0: CD-ROM SONY DVD RW DRU-830A
SS23 PQ: 0 ANSI: 5
[ 139.749076] PCI: Found IRQ 11 for device 0000:02:02.0
[ 139.749195] ohci_hcd 0000:02:02.0: OHCI Host Controller
[ 139.749868] ohci_hcd 0000:02:02.0: new USB bus registered, assigned
bus number 3
[ 139.749960] ohci_hcd 0000:02:02.0: irq 11, io mem 0xdf001000
[ 139.797049] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors
(250059 MB)
[ 139.797227] sd 0:0:0:0: [sda] Write Protect is off
[ 139.797279] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 139.797318] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 139.797518] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors
(250059 MB)
[ 139.797587] sd 0:0:0:0: [sda] Write Protect is off
[ 139.797637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 139.797673] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 139.797736] sda:<6>usb usb3: configuration #1 chosen from 1 choice
[ 139.807317] hub 3-0:1.0: USB hub found
[ 139.807383] hub 3-0:1.0: 2 ports detected
[ 139.816651] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 139.861826] sd 0:0:0:0: [sda] Attached SCSI disk
[ 139.873055] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 139.873161] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 139.873247] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 139.909424] PCI: Found IRQ 5 for device 0000:02:05.0
[ 139.909499] PCI: Sharing IRQ 5 with 0000:00:1f.3
[ 139.909554] PCI: Sharing IRQ 5 with 0000:00:1f.5
[ 139.913689] eth0: VIA Rhine II at 0x1c800, 00:50:ba:21:4b:40, IRQ 5.
[ 139.914658] eth0: MII PHY found at address 8, status 0x782d
advertising 01e1 Link 45e1.
[ 139.967729] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 139.967798] Uniform CD-ROM driver Revision: 3.20
[ 139.968573] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 139.986758] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 139.987378] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 140.429551] kjournald starting. Commit interval 5 seconds
[ 140.429631] EXT3-fs: mounted filesystem with ordered data mode.
[ 151.111867] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 151.245834] Netfilter messages via NETLINK v0.30.
[ 151.262077] nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
[ 157.072554] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 157.077458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 157.919675] Linux agpgart interface v0.102 (c) Dave Jones
[ 157.924658] agpgart: Detected an Intel i815 Chipset.
[ 157.928873] agpgart: AGP aperture is 64M @ 0xd8000000
[ 158.884560] intel_rng: FWH not detected
[ 158.964243] iTCO_vendor_support: vendor-support=0
[ 158.967362] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 159.194278] input: PS2++ Logitech Wheel Mouse as /class/input/input2
[ 159.197399] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled
by hardware
[ 159.197469] iTCO_wdt: No card detected
[ 159.266519] input: PC Speaker as /class/input/input3
[ 159.814385] nvidia: module license 'NVIDIA' taints kernel.
[ 160.665329] parport_pc 00:10: reported by Plug and Play BIOS
[ 160.665449] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 160.670842] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9639
Mon Apr 16 20:20:06 PDT 2007
[ 160.807291] parport0: Printer, Hewlett-Packard HP LaserJet 1100
[ 162.018594] PCI: Found IRQ 5 for device 0000:00:1f.5
[ 162.018671] PCI: Sharing IRQ 5 with 0000:00:1f.3
[ 162.018741] PCI: Sharing IRQ 5 with 0000:02:05.0
[ 162.018814] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 162.340305] intel8x0_measure_ac97_clock: measured 54416 usecs
[ 162.340369] intel8x0: clocking to 48000
[ 163.744907] lp0: using parport0 (interrupt-driven).
[ 164.064170] joydev: Unknown parameter `##'
[ 164.080031] ns558: Unknown parameter `##'
[ 164.109758] sidewinder: Unknown parameter `##'
[ 164.248367] Adding 1076344k swap on /dev/sda2. Priority:-1 extents:1
across:1076344k
[ 164.450112] EXT3 FS on sda3, internal journal
[ 165.149977] kjournald starting. Commit interval 5 seconds
[ 165.150277] EXT3 FS on sda5, internal journal
[ 165.150288] EXT3-fs: mounted filesystem with ordered data mode.
[ 168.524585] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 168.881525] PPP generic driver version 2.4.2
[ 168.959691] NET: Registered protocol family 17
[ 169.049333] NET: Registered protocol family 10
[ 169.049606] lo: Disabled Privacy Extensions
[ 169.401274] NET: Registered protocol family 24
[ 174.877347] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 174.877507] acpi_cpufreq: Unknown symbol
acpi_processor_unregister_performance
[ 174.877931] acpi_cpufreq: Unknown symbol
acpi_processor_preregister_performance
[ 174.878133] acpi_cpufreq: Unknown symbol
acpi_processor_register_performance
[ 177.829474] ppdev: user-space parallel port driver
[ 178.286060] audit(1196794939.634:3): type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=6126 profile="/usr/sbin/cupsd"
[ 179.123916] eth0: no IPv6 routers present
[ 180.149708] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 184.871217] Failure registering capabilities with primary security
module.
[ 186.713172] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 186.713418] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 186.713613] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 222.313165] Inbound IN=ppp0 OUT= MAC= SRC=24.64.186.164
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=39258 PROTO=UDP
SPT=8038 DPT=1026 LEN=492
[ 222.322936] Inbound IN=ppp0 OUT= MAC= SRC=24.64.186.164
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=39260 PROTO=UDP
SPT=8038 DPT=1028 LEN=492
[ 251.517431] Inbound IN=ppp0 OUT= MAC= SRC=190.84.36.199
DST=205.205.251.201 LEN=101 TOS=0x00 PREC=0x00 TTL=113 ID=37299
PROTO=UDP SPT=6346 DPT=28647 LEN=81
[ 562.810328] Inbound IN=ppp0 OUT= MAC= SRC=64.246.249.114
DST=205.205.251.201 LEN=101 TOS=0x00 PREC=0x00 TTL=114 ID=42787
PROTO=UDP SPT=14745 DPT=28647 LEN=81
[ 641.106439] Inbound IN=ppp0 OUT= MAC= SRC=17.123.95.190
DST=205.205.251.201 LEN=388 TOS=0x00 PREC=0x00 TTL=53 ID=48788 PROTO=UDP
SPT=30830 DPT=1026 LEN=368
[ 735.302314] Inbound IN=ppp0 OUT= MAC= SRC=194.54.236.6
DST=205.205.251.201 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=3482 DF
PROTO=TCP SPT=62229 DPT=28647 WINDOW=8192 RES=0x00 SYN URGP=0
[ 738.280499] Inbound IN=ppp0 OUT= MAC= SRC=194.54.236.6
DST=205.205.251.201 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=3580 DF
PROTO=TCP SPT=62229 DPT=28647 WINDOW=8192 RES=0x00 SYN URGP=0
[ 740.330693] Inbound IN=ppp0 OUT= MAC= SRC=24.64.90.185
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=22853 PROTO=UDP
SPT=19656 DPT=1026 LEN=492
[ 740.340706] Inbound IN=ppp0 OUT= MAC= SRC=24.64.90.185
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=22854 PROTO=UDP
SPT=19656 DPT=1027 LEN=492
[ 740.350786] Inbound IN=ppp0 OUT= MAC= SRC=24.64.90.185
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=22855 PROTO=UDP
SPT=19656 DPT=1028 LEN=492
[ 744.300189] Inbound IN=ppp0 OUT= MAC= SRC=194.54.236.6
DST=205.205.251.201 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=3826 DF
PROTO=TCP SPT=62229 DPT=28647 WINDOW=8192 RES=0x00 SYN URGP=0
[ 758.460211] Inbound IN=ppp0 OUT= MAC= SRC=24.64.71.40
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=34438 PROTO=UDP
SPT=16332 DPT=1026 LEN=492
[ 758.469954] Inbound IN=ppp0 OUT= MAC= SRC=24.64.71.40
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=34439 PROTO=UDP
SPT=16332 DPT=1027 LEN=492
[ 774.867692] Inbound IN=ppp0 OUT= MAC= SRC=24.64.34.232
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=54885 PROTO=UDP
SPT=2852 DPT=1027 LEN=492
[ 774.877417] Inbound IN=ppp0 OUT= MAC= SRC=24.64.34.232
DST=205.205.251.201 LEN=512 TOS=0x00 PREC=0x00 TTL=67 ID=54886 PROTO=UDP
SPT=2852 DPT=1028 LEN=492
[ 784.636279] Inbound IN=ppp0 OUT= MAC= SRC=64.246.249.114
DST=205.205.251.201 LEN=101 TOS=0x00 PREC=0x00 TTL=114 ID=63174
PROTO=UDP SPT=14745 DPT=28647 LEN=81
[ 859.428796] Inbound IN=ppp0 OUT= MAC= SRC=24.85.39.90
DST=205.205.251.201 LEN=101 TOS=0x00 PREC=0x00 TTL=116 ID=47669
PROTO=UDP SPT=16103 DPT=28647 LEN=81
rene at PIII800:~$
Qu'est-ce qui cloche dans cette liste et comment corriger cela ?
Merci d'avance pour tous les efforts que vous déployez pour m'aider !
L'ami René
Plus d'informations sur la liste de diffusion ubuntu-fr