[ubuntu-in] OT: Unable to access the internet even though the BSNL WLL connection is working

[Ramnarayan.K]

Hi Moz,

Good for you and Congrats

So much for Airtone Not working ?? maybe it does not work on Wincedows
hence the rush in BSNL to change the instruments

**
As Mir says can you either make a how to and post it somewhere , or
just mail it to the list, it will be good to have.

The whole how to from start to finish will be good,

thanks
ram


On Sat, Mar 22, 2008 at 3:22 PM, Moz <listmoz at gmail.com> wrote:
> On 3/22/08, Ramnarayan. K <ramnarayan.k at gmail.com> wrote:
>  > Hi Moz,
>  >
>  >
>  > On 3/22/08, Moz <listmoz at gmail.com> wrote:
>  >
>  > > I need to connect to the internet using BSNL CDMA WLL fixed wireless
>  > > phone (it is a Airtone 800-1x-III phone instrument) using Gutsy 7.10.
>  > > Can you send me your wvdial.conf file? Or other config advise to help
>  > > me connect?
>  >
>  > The BSNL -FWT phone that does work is the Huawei ETS 2288. As far as i
>  > know the Airtone 800-1x-III , sadly, *does not work*. However,
>  > depending on where you are the BSNL will change the phone instrument
>  > to a model that works.
>
>   Hi, a few hours ago I sent a mail to mailing list to request on info
>  on how to connect gutsy 7.10 to internet using BSNL CDMA WLL fixed
>  wireless telephone (instrument Airtone 800-1x-III). I just finished
>  configuration and connected to the internet, and here are my config
>  files:
>
>  moz at t64c:~$ cat /etc/resolv.conf
>  nameserver 218.248.240.208
>  nameserver 218.248.240.135
>  moz at t64c:~$
>  moz at t64c:~$ cat /etc/wvdial.conf
>
>  [Dialer Defaults]
>  Init1 = ATZ
>  # Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>  Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>  Init3 = at+crm=1;+cmux=1;+cps=33;+cta=0
>  Modem Type = Analog Modem
>  Baud = 115200
>  New PPPD = yes
>  Modem = /dev/ttyUSB0
>  ISDN = 0
>  Phone = #777
>  Password=cdma
>  Username=cdma
>
>
>  Regards
>
>  Moz
>