[Ubuntu-ni] distribución del ancho de banda
Antonio Esgueva Martinez
aesguevam en gmail.com
Vie Ago 8 21:50:38 BST 2008
Guillermo Belli escribió:
> Los procesadores celeron siempre han sido una version "castrada" del
> equivalente Pentium, en este caso seria el Pentium D (que es de las
> ultimas versiones que salieron del Pentium 4). En Pentium 4 nunca fue
> muy buen procesador, y los Celeron son mucho peor.
>
> Los procesadores Intel con soporte para 64bits anteriores a los Core2,
> (Pentium D, Celeron D, etc.) agregaron una version modificada del set
> de instrucciones de AMD64 (tambien llamado x86-64), y solo tenia fines
> de marketing, porque daban como 40% menor rendimiento corriendo
> software de 64bits, comparado al mismo de 32bits. con los Core2 ya se
> puede ver un incremento en el desempeño pasando de software de 32bits
> a 64bits, pero la diferencia aún es menor que en los procesadores AMD.
>
> En cuanto a lo de la tarjeta madre, pues estoy de acuerdo con vos, no
> son muy buenas. AsRock es una división de Asus, oriendata a otro
> segmento de mercado. Imaginate que usaron otro nombre para no ensuciar
> el se Asus :P
>
> En todo caso, a pesar del bajo rendimiento y soporte pobre para 64bits
> que ofrecen el Celeron D, no debería darte problemas de
> compatibilidad, y no tiene porque darte error al momento de compilar
> algo. Deberías buscar la causa del problema, a lo mejor memoria
> defectuosa? Pasale el memtest+ y dejalo toda la noche para verificar.
> También podría ser sobrecalentamiento del procesador.
>
> Qué modelo es tu tarjeta madre? Que chipset tiene? Podría ser mal
> soporte en linux para tu chipset (controlador de disco, controlador de
> video, controlador de red, etc.).
>
> Saludos.
>
> 2008/8/5 Antonio Esgueva Martinez <aesguevam en gmail.com>:
>
>> Tengo un problema. Cuando la computadora esta descargando algo del
>> internet (actualizando el update, descargando archivos boinc), y otro
>> programa (firefox) quiere hacer uso de este, aparece como que no hay
>> conexión.
>> La verdad es que en mi antigua máquina no tenía este problema. Una amd
>> duron 1300, con 640 Mb en ram y un disco de 30 Gb. Y que si pasaron
>> distribuciones por ella (Suse, Ubuntu desde la 5.10 hasta 7.10)
>> Ahora uso una celeron D 1.96 Mhz, con 512 Mb en ram, disco de 80 GB, y
>> con las supervendidas en nicaragua tarjetas madre Asrock, que para ser
>> sincero no me convencen.
>> Hay muchas cosas que no tengo claras con esta compu. Aún siendo mas
>> poderosa que mi antigua computadora, no le llega ni a los talones en
>> velocidad de ejecución de programas y en estabilidad, con ninguna de las
>> arquitecturas, ya que le he instalado Suse 10.1 64 bits, Ubuntu 7.10 64
>> bits, Ubuntu 7.10 32 bits, y finalmente Ubuntu 8.04 32 bits. Si es mas
>> rápida en procesamiento por ejemplo ejecutando el boinc, o pasando
>> canciones en la consola, quemando dvds.
>>
>> Los problemas se los achaco al procesador (Intel Celeron D) que ni es de
>> 64 ni es de 32. Y mi teoría loca es que como los programas ya vienen
>> compilados en máquinas "estándar"; hay conflictos con estos
>> procesadores ni chicha ni limonada.
>>
>> También digo esto por que quise instalar el Linux From Scratch, y no
>> pude compilarlo.
>>
>> Bueno no los aburro, cualquier idea por donde buscar me responden
>>
>>
>> --
>> Ubuntu-ni mailing list
>> Ubuntu-ni en lists.ubuntu.com
>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-ni
>>
>>
>
>
>
>
La tarjeta es una Asrock 775i65G
http://www.asrock.com/mb/overview.la.asp?Model=775i65G&s=775
No he realizado el memtest ya que tarda demasiado
Mando la salida de dmesg >> dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd en terranova) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC
2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001df40000 (usable)
[ 0.000000] BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffbc0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 122688) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 122688
[ 0.000000] HighMem 122688 -> 122688
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 122688
[ 0.000000] On node 0 totalpages: 122688
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 926 pages used for memmap
[ 0.000000] Normal zone: 117666 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FAAA0 checksum 0
[ 0.000000] ACPI: RSDP 000FAAA0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1DF40000, 0030 (r1 A M I OEMRSDT 12000505
MSFT 97)
[ 0.000000] ACPI: FACP 1DF40200, 0081 (r2 A M I OEMFACP 12000505
MSFT 97)
[ 0.000000] ACPI: DSDT 1DF40370, 3AD4 (r1 7i6GV 7i6GV190 190
INTL 2002026)
[ 0.000000] ACPI: FACS 1DF50000, 0040
[ 0.000000] ACPI: APIC 1DF40300, 006C (r1 A M I OEMAPIC 12000505
MSFT 97)
[ 0.000000] ACPI: OEMB 1DF50040, 003F (r1 A M I OEMBIOS 12000505
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1e000000:e0e00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000e6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000
- 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 121730
[ 0.000000] Kernel command line:
root=UUID=16a445ce-35c9-435a-8a61-f07e2ef0f3b7 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2796.436 MHz processor.
[ 9.509687] Console: colour VGA+ 80x25
[ 9.509691] console [tty0] enabled
[ 9.509906] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 9.510139] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 9.518058] Memory: 474500k/490752k available (2177k kernel code,
15700k reserved, 1006k data, 368k init, 0k highmem)
[ 9.518067] virtual kernel memory layout:
[ 9.518068] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 9.518069] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.518070] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
[ 9.518071] lowmem : 0xc0000000 - 0xddf40000 ( 479 MB)
[ 9.518072] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 9.518073] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 9.518074] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 9.518078] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 9.518115] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 9.598099] Calibrating delay using timer specific routine.. 5597.71
BogoMIPS (lpj=11195432)
[ 9.598124] Security Framework initialized
[ 9.598129] SELinux: Disabled at boot.
[ 9.598143] AppArmor: AppArmor initialized
[ 9.598148] Failure registering capabilities with primary security
module.
[ 9.598158] Mount-cache hash table entries: 512
[ 9.598286] Initializing cgroup subsys ns
[ 9.598293] Initializing cgroup subsys cpuacct
[ 9.598306] CPU: After generic identify, caps: bfebfbff 20000000
00000000 00000000 0000651d 00000000 00000000 00000000
[ 9.598316] monitor/mwait feature present.
[ 9.598318] using mwait in idle threads.
[ 9.598325] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 9.598328] CPU: L2 cache: 256K
[ 9.598330] CPU: Hyper-Threading is disabled
[ 9.598333] CPU: After all inits, caps: bfebfbff 20000000 00000000
0000b180 0000651d 00000000 00000000 00000000
[ 9.598344] Compat vDSO mapped to ffffe000.
[ 9.598361] Checking 'hlt' instruction... OK.
[ 9.614576] SMP alternatives: switching to UP code
[ 9.616565] Freeing SMP alternatives: 11k freed
[ 9.616715] Early unpacking initramfs... done
[ 9.935611] ACPI: Core revision 20070126
[ 9.935675] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 9.937825] CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
[ 9.937868] Total of 1 processors activated (5597.71 BogoMIPS).
[ 9.938047] ENABLING IO-APIC IRQs
[ 9.938226] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.085943] Brought up 1 CPUs
[ 10.085967] CPU0 attaching sched-domain:
[ 10.085971] domain 0: span 01
[ 10.085973] groups: 01
[ 10.086211] net_namespace: 64 bytes
[ 10.086221] Booting paravirtualized kernel on bare hardware
[ 10.086864] Time: 7:27:37 Date: 08/07/08
[ 10.086897] NET: Registered protocol family 16
[ 10.087212] EISA bus registered
[ 10.087245] ACPI: bus type pci registered
[ 10.087427] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 10.087430] PCI: Using configuration type 1
[ 10.087441] Setting up standard PCI resources
[ 10.098567] ACPI: EC: Look up EC in DSDT
[ 10.102561] ACPI: Interpreter enabled
[ 10.102566] ACPI: (supports S0 S1 S3 S4 S5)
[ 10.102587] ACPI: Using IOAPIC for interrupt routing
[ 10.110901] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.111506] Force enabled HPET at base address 0xfed00000
[ 10.111514] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 10.111518] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 10.111847] PCI: Transparent bridge - 0000:00:1e.0
[ 10.111877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.112004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 10.114217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 10.114338] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 10.114449] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 10.114559] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 10.114668] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 10.114779] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 10.114890] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 10.115001] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 10.115197] ACPI Warning (tbutils-0217): Incorrect checksum in table
[OEMB] - 32, should be 25 [20070126]
[ 10.115204] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.115265] pnp: PnP ACPI init
[ 10.115278] ACPI: bus type pnp registered
[ 10.120865] pnp: PnP ACPI: found 14 devices
[ 10.120870] ACPI: ACPI bus type pnp unregistered
[ 10.120875] PnPBIOS: Disabled by ACPI PNP
[ 10.121258] PCI: Using ACPI for IRQ routing
[ 10.121263] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 10.133897] NET: Registered protocol family 8
[ 10.133900] NET: Registered protocol family 20
[ 10.134055] hpet clockevent registered
[ 10.134061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.134066] hpet0: 3 64-bit timers, 14318180 Hz
[ 10.135114] AppArmor: AppArmor Filesystem Enabled
[ 10.137861] Time: tsc clocksource has been installed.
[ 10.145936] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 10.145940] system 00:07: ioport range 0x800-0x87f has been reserved
[ 10.145943] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 10.145948] system 00:07: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 10.145951] system 00:07: iomem range 0xffb00000-0xffbfffff could not
be reserved
[ 10.145957] system 00:08: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 10.145960] system 00:08: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 10.145969] system 00:0c: ioport range 0x680-0x6ff has been reserved
[ 10.145972] system 00:0c: ioport range 0x295-0x296 has been reserved
[ 10.145979] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 10.145982] system 00:0d: iomem range 0xc0000-0xdffff could not be
reserved
[ 10.145985] system 00:0d: iomem range 0xe0000-0xfffff could not be
reserved
[ 10.145988] system 00:0d: iomem range 0x100000-0x1dffffff could not
be reserved
[ 10.145991] system 00:0d: iomem range 0xfff00000-0xffffffff could not
be reserved
[ 10.176607] PCI: Bridge: 0000:00:1e.0
[ 10.176613] IO window: b000-bfff
[ 10.176619] MEM window: fe500000-fe5fffff
[ 10.176623] PREFETCH window: disabled.
[ 10.176638] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.176653] NET: Registered protocol family 2
[ 10.213913] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 10.214178] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 10.214260] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 10.214340] TCP: Hash tables configured (established 16384 bind 16384)
[ 10.214343] TCP reno registered
[ 10.226011] checking if image is initramfs... it is
[ 10.637635] Switched to high resolution mode on CPU 0
[ 10.846368] Freeing initrd memory: 7323k freed
[ 10.847236] audit: initializing netlink socket (disabled)
[ 10.847252] audit(1218094057.224:1): initialized
[ 10.849860] VFS: Disk quotas dquot_6.5.1
[ 10.849971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.850168] io scheduler noop registered
[ 10.850171] io scheduler anticipatory registered
[ 10.850173] io scheduler deadline registered
[ 10.850192] io scheduler cfq registered (default)
[ 10.850207] Boot video device is 0000:00:02.0
[ 10.850682] isapnp: Scanning for PnP cards...
[ 11.202495] isapnp: No Plug & Play device found
[ 11.276740] Real Time Clock Driver v1.12ac
[ 11.276867] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 11.277023] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.278601] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.279765] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 11.279864] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 11.280017] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 11.282708] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.282714] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.285491] mice: PS/2 mouse device common for all mice
[ 11.285682] EISA: Probing bus 0 at eisa.0
[ 11.285720] EISA: Detected 0 cards.
[ 11.285724] cpuidle: using governor ladder
[ 11.285727] cpuidle: using governor menu
[ 11.285820] NET: Registered protocol family 1
[ 11.285853] Using IPI No-Shortcut mode
[ 11.285887] registered taskstats version 1
[ 11.285978] Magic number: 4:204:470
[ 11.286112] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 11.286114] EDD information not available.
[ 11.286412] Freeing unused kernel memory: 368k freed
[ 11.313278] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 12.567867] fuse init (API version 7.9)
[ 12.593901] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 12.593930] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 12.593944] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 12.593956] ACPI Exception (processor_core-0816): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 13.246801] usbcore: registered new interface driver usbfs
[ 13.246832] usbcore: registered new interface driver hub
[ 13.256246] usbcore: registered new device driver usb
[ 13.268201] USB Universal Host Controller Interface driver v3.0
[ 13.268283] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 13.268296] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 13.268300] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.268619] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 13.268656] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
[ 13.268826] usb usb1: configuration #1 chosen from 1 choice
[ 13.268857] hub 1-0:1.0: USB hub found
[ 13.268866] hub 1-0:1.0: 2 ports detected
[ 13.316204] 8139too Fast Ethernet driver 0.9.28
[ 13.338551] SCSI subsystem initialized
[ 13.372262] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 17
[ 13.372277] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 13.372282] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.372324] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 13.372355] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e000
[ 13.372489] usb usb2: configuration #1 chosen from 1 choice
[ 13.372519] hub 2-0:1.0: USB hub found
[ 13.372527] hub 2-0:1.0: 2 ports detected
[ 13.392097] libata version 3.00 loaded.
[ 13.464231] Floppy drive(s): fd0 is 1.44M
[ 13.476195] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 13.476210] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 13.476215] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 13.476255] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 13.476286] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 13.476420] usb usb3: configuration #1 chosen from 1 choice
[ 13.476455] hub 3-0:1.0: USB hub found
[ 13.476463] hub 3-0:1.0: 2 ports detected
[ 13.487859] FDC 0 is a post-1991 82077
[ 13.580167] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level,
low) -> IRQ 16
[ 13.580183] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 13.580187] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 13.580224] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 13.580250] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
[ 13.580398] usb usb4: configuration #1 chosen from 1 choice
[ 13.580431] hub 4-0:1.0: USB hub found
[ 13.580438] hub 4-0:1.0: 2 ports detected
[ 13.684263] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level,
low) -> IRQ 19
[ 13.684283] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 13.684287] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.684335] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 13.688251] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.688259] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 13.688271] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe77bc00
[ 13.703931] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 13.704070] usb usb5: configuration #1 chosen from 1 choice
[ 13.704101] hub 5-0:1.0: USB hub found
[ 13.704110] hub 5-0:1.0: 8 ports detected
[ 13.808258] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 22 (level,
low) -> IRQ 20
[ 13.808938] eth0: RealTek RTL8139 at 0xb800, 00:13:8f:94:b7:d4, IRQ 20
[ 13.808941] eth0: Identified 8139 chip type 'RTL-8101'
[ 13.812173] ata_piix 0000:00:1f.1: version 2.12
[ 13.812194] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 18
[ 13.812237] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 13.815393] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 13.816922] scsi0 : ata_piix
[ 13.818325] scsi1 : ata_piix
[ 13.819887] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 13.819891] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 14.148180] ata1.00: ATA-7: SAMSUNG SP0842N, BH100-35, max UDMA/100
[ 14.148186] ata1.00: 156301488 sectors, multi 16: LBA48
[ 14.148215] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-H10A, JL02, max UDMA/33
[ 14.180050] ata1.00: configured for UDMA/100
[ 14.351787] ata1.01: configured for UDMA/33
[ 14.507670] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0842N
BH10 PQ: 0 ANSI: 5
[ 14.511867] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H10A
JL02 PQ: 0 ANSI: 5
[ 14.533305] Driver 'sd' needs updating - please use bus_type methods
[ 14.533412] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 14.533429] sd 0:0:0:0: [sda] Write Protect is off
[ 14.533432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.533456] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 14.533517] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors
(80026 MB)
[ 14.533531] sd 0:0:0:0: [sda] Write Protect is off
[ 14.533534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.533556] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 14.533562] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 14.542907] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 14.578197] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.586532] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.586559] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 14.600585] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 14.600593] Uniform CD-ROM driver Revision: 3.20
[ 14.600660] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 14.945122] Attempting manual resume
[ 14.945127] swsusp: Resume From Partition 8:1
[ 14.945129] PM: Checking swsusp image.
[ 14.945362] PM: Resume from disk failed.
[ 14.979747] kjournald starting. Commit interval 5 seconds
[ 14.979767] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.211830] Linux agpgart interface v0.102
[ 21.289533] agpgart: Detected an Intel 865 Chipset.
[ 21.289777] agpgart: Detected 32636K stolen memory.
[ 21.383784] agpgart: AGP aperture is 128M @ 0xf0000000
[ 21.603637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.663702] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.882018] input: Power Button (FF) as /devices/virtual/input/input2
[ 21.891592] ACPI: Power Button (FF) [PWRF]
[ 21.891853] input: Power Button (CM) as /devices/virtual/input/input3
[ 21.907430] ACPI: Power Button (CM) [PWRB]
[ 23.268258] intel_rng: FWH not detected
[ 23.370395] iTCO_vendor_support: vendor-support=0
[ 23.398652] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 23.398835] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1,
TCOBASE=0x0860)
[ 23.398906] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 23.600523] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 24.703501] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level,
low) -> IRQ 21
[ 24.703532] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 25.025700] intel8x0_measure_ac97_clock: measured 55720 usecs
[ 25.025705] intel8x0: clocking to 48000
[ 25.065194] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
[ 25.099027] parport_pc 00:06: reported by Plug and Play ACPI
[ 25.099133] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 26.514747] lp0: using parport0 (interrupt-driven).
[ 26.574102] Adding 995988k swap on /dev/sda1. Priority:-1 extents:1
across:995988k
[ 27.138478] EXT3 FS on sda2, internal journal
[ 27.858882] kjournald starting. Commit interval 5 seconds
[ 27.859093] EXT3 FS on sda5, internal journal
[ 27.859099] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.318262] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.164790] No dock devices found.
[ 29.816390] NET: Registered protocol family 10
[ 29.816999] lo: Disabled Privacy Extensions
[ 29.982094] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 29.982102] apm: overridden by ACPI.
[ 30.221058] ppdev: user-space parallel port driver
[ 30.844053] audit(1218115677.443:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4875 profile="/usr/sbin/cupsd" namespace="default"
[ 36.729077] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 36.951983] Bluetooth: Core ver 2.11
[ 36.952783] NET: Registered protocol family 31
[ 36.952789] Bluetooth: HCI device and connection manager initialized
[ 36.952793] Bluetooth: HCI socket layer initialized
[ 37.054934] Bluetooth: L2CAP ver 2.9
[ 37.054940] Bluetooth: L2CAP socket layer initialized
[ 37.198774] Bluetooth: RFCOMM socket layer initialized
[ 37.198796] Bluetooth: RFCOMM TTY layer initialized
[ 37.198798] Bluetooth: RFCOMM ver 1.8
[ 39.845867] [drm] Initialized drm 1.1.0 20060810
[ 39.868339] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 39.868352] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 39.868453] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 39.949531] NET: Registered protocol family 17
[ 51.810964] eth0: no IPv6 routers present
La salida del lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated
Graphics Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Más información sobre la lista de distribución Ubuntu-ni