Re: Multi install with existing MAAS starts all services except for “IP Pending” on Glance Simplestreams Image Sync
Mike McCracken
mike.mccracken at canonical.com
Wed Jul 29 16:35:24 UTC 2015
Can you share what goes wrong when you tried --series vivid ?
It's always supported specifying whatever you like there, so it should
work, and if something complained, that's a bug.
Thanks,
-mike
On Wed, Jul 29, 2015 at 9:20 AM, Jeff McLamb <mclamb at gmail.com> wrote:
> It seems as though vivid is not a valid --series name in my version of
> openstack-installer 0.99.19
>
> I can run it with trusty just fine, but I suspect that that will lead
> to the same issue where glance is installed as vivid and the rest are
> installed as trusty?
>
> Thanks,
>
> Jeff
>
>
> On Wed, Jul 29, 2015 at 11:48 AM, Mike McCracken
> <mike.mccracken at canonical.com> wrote:
> > If you're able, I think the easiest way is to tear it down and re-deploy.
> > Anything else would be a lot of manual steps. Juju has some upgrade
> > capabilities, but the openstack installer pre-dates them, and so you'd
> have
> > to hand-edit some config files, etc.
> >
> > -mike
> >
> > On Wed, Jul 29, 2015 at 8:44 AM, Jeff McLamb <mclamb at gmail.com> wrote:
> >>
> >> Cool, thanks for the tip, Mike.
> >>
> >> Yes the host is vivid running juju 1.24.3-vivid-amd64
> >>
> >> Given my current state, should I kill the environment and start again,
> >> or is there a way I can deploy or update what's currently there
> >> without having to start over?
> >>
> >> Thanks,
> >>
> >> Jeff
> >>
> >>
> >> On Wed, Jul 29, 2015 at 11:39 AM, Mike McCracken
> >> <mike.mccracken at canonical.com> wrote:
> >> > Hi Jeff, so it looks like you're running vivid on the host, is that
> >> > right?
> >> > Your point that the sync charm is the only one deployed as vivid is a
> >> > good
> >> > catch - while this should still work, it might be causing problems for
> >> > juju's local provider.
> >> > I will fix the deploy code for the sync charm to use the same series
> as
> >> > the
> >> > other charms, but one thing you can try in the meantime is use
> --series
> >> > vivid to just deploy the whole thing as vivid.
> >> > This has been tested and should work.
> >> >
> >> > -mike
> >> >
> >> > On Wed, Jul 29, 2015 at 8:25 AM, Jeff McLamb <mclamb at gmail.com>
> wrote:
> >> >>
> >> >> Hey Adam, Mike -
> >> >>
> >> >> The environment is up, but the container that should contain
> >> >> glance-simplestreams is not up at all. Here is the lxc-ls output from
> >> >> the node that contains all of the infrastructure containers:
> >> >>
> >> >> ubuntu at cooperative-crowd:~$ sudo lxc-ls --fancy
> >> >> NAME STATE IPV4 IPV6 AUTOSTART
> >> >> ----------------------------------------------------------------
> >> >> juju-machine-3-lxc-0 RUNNING 192.168.1.17 - YES
> >> >> juju-machine-3-lxc-1 RUNNING 192.168.1.18 - YES
> >> >> juju-machine-3-lxc-2 RUNNING 192.168.1.19 - YES
> >> >> juju-machine-3-lxc-3 RUNNING 192.168.1.20 - YES
> >> >> juju-machine-3-lxc-4 RUNNING 192.168.1.21 - YES
> >> >> juju-machine-3-lxc-6 RUNNING 192.168.1.22 - YES
> >> >> juju-machine-3-lxc-7 RUNNING 192.168.1.23 - YES
> >> >> juju-trusty-lxc-template STOPPED - - NO
> >> >> juju-vivid-lxc-template STOPPED - - NO
> >> >> ubuntu at cooperative-crowd:~$
> >> >>
> >> >> As you can see, the lxc-5 machine that should be running is not.
> >> >>
> >> >> When I look at openstack-status all of the services have a green
> >> >> checkmark and are [started] except for Glance Simplestreams which is
> >> >> in the [pending] stage.
> >> >>
> >> >> In the place of an IP address it says IP Pending and "waiting for
> >> >> initial status".
> >> >>
> >> >> I was wondering if I was running out of IP addresses in that range on
> >> >> the MAAS DHCP server, but there are only 8 containers and there are
> >> >> plenty of addresses left in that range.
> >> >>
> >> >> Here is the output of juju status where it is revealed that:
> >> >>
> >> >> 3/lxc/5:
> >> >> agent-state-info: 'failed to retrieve the template to clone:
> >> >> template container
> >> >> "juju-vivid-lxc-template" did not stop'
> >> >> instance-id: pending
> >> >> series: vivid
> >> >>
> >> >> For some reason this is the only container that it tries to install
> >> >> using the vivid series. All other containers use trusty.
> >> >>
> >> >> Here is the full juju status output:
> >> >>
> >> >> http://paste.ubuntu.com/11960193/
> >> >>
> >> >> Thanks!
> >> >>
> >> >> Jeff
> >> >>
> >> >> On Wed, Jul 29, 2015 at 11:15 AM, Adam Stokes
> >> >> <adam.stokes at canonical.com>
> >> >> wrote:
> >> >> > Jeff,
> >> >> >
> >> >> > Is the environment still up? Can you `juju ssh
> >> >> > glance-simplestreams-sync/0`
> >> >> > and grab the unit logs from `/var/log/juju/`.
> >> >> >
> >> >> > CCing Mike for further investigation into that service
> >> >> >
> >> >> > On Wed, Jul 29, 2015 at 10:25 AM, Jeff McLamb <mclamb at gmail.com>
> >> >> > wrote:
> >> >> >>
> >> >> >> Hey Adam -
> >> >> >>
> >> >> >> Sure, here it is:
> >> >> >>
> >> >> >> http://paste.ubuntu.com/11959888/
> >> >> >>
> >> >> >> Thanks!
> >> >> >>
> >> >> >> Jeff
> >> >> >>
> >> >> >>
> >> >> >> On Wed, Jul 29, 2015 at 10:07 AM, Adam Stokes
> >> >> >> <adam.stokes at canonical.com>
> >> >> >> wrote:
> >> >> >> > Hey Jeff,
> >> >> >> >
> >> >> >> > Can you paste.ubuntu.com your ~/.cloud-install/commands.log?
> >> >>
> >> >> >>
> >> >> >> >
> >> >> >> > On Wed, Jul 29, 2015 at 1:38 AM, Jeff McLamb <mclamb at gmail.com>
> >>
> >> >> >> > wrote:
> >> >> >> >>
> >> >> >> >> Hello -
> >> >> >> >>
> >> >> >> >> Due to Adam’s suggestion in a previous thread about Autopilot
> not
> >> >> >> >> working properly with a proxy running (e.g. masa-proxy) on the
> >> >> >> >> MAAS
> >> >> >> >> server, I killed the environment and started over with the
> Multi
> >> >> >> >> option.
> >> >> >> >>
> >> >> >> >> Interesting aside: you must openstack-install -k and
> >> >> >> >> openstack-install
> >> >> >> >> -u or otherwise remove ~/.cloud-install entirely because if you
> >> >> >> >> just
> >> >> >> >> do a -k and do not remove the landscape related files, it will
> >> >> >> >> still
> >> >> >> >> try to install an Autopilot-based setup even if you choose
> Multi.
> >> >> >> >>
> >> >> >> >> Anyway, the Multi install progressed well, bootstrapping juju
> >> >> >> >> with
> >> >> >> >> the
> >> >> >> >> VM node, followed by deploying services across 3 other physical
> >> >> >> >> nodes
> >> >> >> >> that are all big RAM and big core.
> >> >> >> >>
> >> >> >> >> One physical node was chosen as dedicated compute, one as
> >> >> >> >> dedicated
> >> >> >> >> Neutron, and the third was chosen for infrastructure, deploying
> >> >> >> >> what
> >> >> >> >> should be 8 containers.
> >> >> >> >>
> >> >> >> >> In the openstack-status view I see that all services have
> >> >> >> >> “started”
> >> >> >> >> except for the Glance - Simplestreams Image Sync service which
> is
> >> >> >> >> to
> >> >> >> >> be deployed as Container 5 on the infrastructure machine
> (Machine
> >> >> >> >> 3
> >> >> >> >> in
> >> >> >> >> my case). It is stuck in “IP Pending” state.
> >> >> >> >>
> >> >> >> >> I have rebooted the infrastructure node and all lxc containers
> >> >> >> >> came
> >> >> >> >> back up, except a lxc-ls —fancy does not show the existence of
> >> >> >> >> juju-machine-3-lxc-5. It does have STOPPED
> >> >> >> >> juju-trusty-lxc-template
> >> >> >> >> and juju-vivid-lxc-template. The vivid one was actually RUNNING
> >> >> >> >> before
> >> >> >> >> I rebooted the system, but now it is STOPPED.
> >> >> >> >>
> >> >> >> >> I can get to the horizon dashboard GUI but I cannot login with
> a
> >> >> >> >> “An
> >> >> >> >> error occurred authenticating. Please try again later.”
> >> >> >> >>
> >> >> >> >> Any ideas how to get that last service running so I can
> hopefully
> >> >> >> >> log
> >> >> >> >> into the horizon GUI for the first time?
> >> >> >> >>
> >> >> >> >> Thanks,
> >> >> >> >>
> >> >> >> >> Jeff
> >> >> >> >>
> >> >> >> >> --
> >> >> >> >> ubuntu-openstack-installer mailing list
> >> >> >> >> ubuntu-openstack-installer at lists.ubuntu.com
> >> >> >> >> Modify settings or unsubscribe at:
> >> >> >> >>
> >> >> >> >>
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-openstack-installer
> >> >> >> >
> >> >> >> >
> >> >> >
> >> >> >
> >> >
> >> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-openstack-installer/attachments/20150729/e45d0bde/attachment-0001.html>
More information about the ubuntu-openstack-installer
mailing list