[Bug 1324992] Re: freeipmi patch for HP moonshot ARM cartridges with I2c

[dann frazier]

OK, turns out it was a firmware setting that Manoj was missing in the
previous comment.

On a system with the correct setting, this is what freeipmi shows w/o my branch:
root at ubuntu:/home/ubuntu# bmc-info --no-probing --driver-type=SSIF --driver-address=0x10 --driver-device=/dev/i2c-2 --get-device-id
ipmi_cmd_get_device_id: internal system error

And this is with my branch:
root at ubuntu:/home/ubuntu# bmc-info --no-probing --driver-type=SSIF --driver-address=0x10 --driver-device=/dev/i2c-2
Device ID             : 20
Device Revision       : 0
Device SDRs           : supported
Firmware Revision     : 1.30
Device Available      : yes (normal operation)
IPMI Version          : 2.0
Sensor Device         : supported
SDR Repository Device : unsupported
SEL Device            : supported
FRU Inventory Device  : supported
IPMB Event Receiver   : unsupported
IPMB Event Generator  : supported
Bridge                : unsupported
Chassis Device        : supported
Manufacturer ID       : Hewlett-Packard (11)
Product ID            : 8449

System Firmware Version       :
System Name                   : ProLiant m800 Server Cartridge
Primary Operating System Name :
Operating System Name         :

Channel Information
Channel Number       : 0
Medium Type          : IPMB (I2C)
Protocol Type        : IPMB-1.0
Active Session Count : 0
Session Support      : session-less
Vendor ID            : Intelligent Platform Management Interface forum (7154)

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to freeipmi in Ubuntu.
https://bugs.launchpad.net/bugs/1324992

Title:
  freeipmi patch for HP moonshot ARM cartridges with I2c

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/freeipmi/+bug/1324992/+subscriptions