Build failed in Jenkins: sru_kernel-oneiric_lts_hwe-server_amd64-kvm-virtual #2
Jenkins Notification
devnull at canonical.com
Sun Sep 16 00:12:23 UTC 2012
See <http://10.189.74.2:8080/job/sru_kernel-oneiric_lts_hwe-server_amd64-kvm-virtual/2/>
------------------------------------------
[...truncated 1061 lines...]
control.ubuntu.natty
ecryptfs.py
ecryptfs.tar.bz2
run_one.patch
Selected control file: control.ubuntu.lucid
Determining correct control file for test: qrt
Selecting from these available control files:
control
qrt.py
qrt.tar.bz2
snapshot-qrt
Selected control file: control
Determining correct control file for test: stress
Selecting from these available control files:
stress.py
control
stress-1.0.4.tar.gz
Selected control file: control
Determining correct control file for test: xfstests
Selecting from these available control files:
xfstests.tar.bz2
common_rc.patch
control.ubuntu
generate.py
control
control.debug
xfstests.py
xfstests_228_text.patch
xfstests_103_text.patch
xfstests_change_e4defrag_location.patch
Selected control file: control.ubuntu
*** INFO ***
No dependencies found for test "atargs".
*** INFO ***
No dependencies found for test "atargs".
*** INFO ***
No dependencies found for test "stress".
args = {'UBUNTU_SCRATCH_PARTITION': '/dev/sdb2', 'UBUNTU_SCRATCH_DEVICE': '/dev/sdb1'}
Reading package lists...
Building dependency tree...
Reading state information...
libglib2.0-dev is already the newest version.
intltool is already the newest version.
keyutils is already the newest version.
libkeyutils-dev is already the newest version.
libpam0g-dev is already the newest version.
libnss3-dev is already the newest version.
libtool is already the newest version.
acl is already the newest version.
xfsprogs is already the newest version.
btrfs-tools is already the newest version.
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-35-server linux-headers-2.6.32-41-server
linux-headers-2.6.32-33-server linux-headers-2.6.32-33
linux-headers-2.6.32-35 linux-headers-2.6.32-41 linux-headers-2.6.32-38
ssl-cert linux-headers-2.6.32-38-server
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
libcap2-bin is already the newest version.
gcc-multilib is already the newest version.
gdb is already the newest version.
gawk is already the newest version.
execstack is already the newest version.
exim4 is already the newest version.
libcap-dev is already the newest version.
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-35-server linux-headers-2.6.32-41-server
linux-headers-2.6.32-33-server linux-headers-2.6.32-33
linux-headers-2.6.32-35 linux-headers-2.6.32-41 linux-headers-2.6.32-38
ssl-cert linux-headers-2.6.32-38-server
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
uuid-dev is already the newest version.
xfslibs-dev is already the newest version.
xfsdump is already the newest version.
autoconf is already the newest version.
kpartx is already the newest version.
libtool is already the newest version.
python-xattr is already the newest version.
libacl1-dev is already the newest version.
libaio-dev is already the newest version.
quota is already the newest version.
bc is already the newest version.
libdm0-dev is already the newest version.
btrfs-tools is already the newest version.
attr is already the newest version.
The following packages were automatically installed and are no longer required:
linux-headers-2.6.32-35-server linux-headers-2.6.32-41-server
linux-headers-2.6.32-33-server linux-headers-2.6.32-33
linux-headers-2.6.32-35 linux-headers-2.6.32-41 linux-headers-2.6.32-38
ssl-cert linux-headers-2.6.32-38-server
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
adduser: The user `fsgqa' already exists.
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sdb: 8590MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 1049MB 1048MB ext4 p1
2 1050MB 2097MB 1048MB ext4 p2
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sdb: 8590MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 1049MB 1048MB ext4 p1
2 1050MB 2097MB 1048MB ext4 p2
>>> test-attributes begin
{
"distro-release": "Ubuntu 10.04",
"environ": {
"HOME": "/home/ubuntu",
"LANG": "en_US.UTF-8",
"LOGNAME": "ubuntu",
"MAIL": "/var/mail/ubuntu",
"PATH": "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games",
"PWD": "/home/ubuntu",
"SCRATCH_DRIVE": "/dev/sdb",
"SHELL": "/bin/bash",
"SHLVL": "1",
"SSH_CLIENT": "192.168.123.1 40075 22",
"SSH_CONNECTION": "192.168.123.1 40075 192.168.123.64 22",
"USER": "ubuntu",
"_": "/bin/sh"
},
"kernel": "2.6.32-43.97",
"platform": {
"arch": {
"bits": "64bit",
"linkage": "ELF"
},
"hardware": "virtual",
"hostname": "clean-lucid-server-amd64",
"libc": {
"lib": "glibc",
"version": "2.4"
},
"machine": "x86_64",
"proc": ""
},
"timestamp": "Saturday, 15. September 2012 21:59 UTC",
"version": "0.0.4-1"
}
>>> test-attributes end
===============
Linux clean-lucid-server-amd64 2.6.32-43-server #97-Ubuntu SMP Wed Sep 5 16:56:41 UTC 2012 x86_64 GNU/Linux
===============
+ sudo autotest/client/bin/autotest autotest/client/tests/ecryptfs/control.ubuntu.lucid
16:59:06 INFO | Writing results to /home/ubuntu/autotest/client/results/default
16:59:06 ERROR| Could not determine initlevel, assuming 2
16:59:06 INFO | START ---- ---- timestamp=1347746346 localtime=Sep 15 16:59:06
16:59:06 INFO | START ecryptfs.setup.all ecryptfs.setup.all timestamp=1347746346 localtime=Sep 15 16:59:06
16:59:07 ERROR| [stderr] autoreconf: Entering directory `.'
16:59:07 ERROR| [stderr] autoreconf: configure.ac: not using Gettext
16:59:08 ERROR| [stderr] autoreconf: running: aclocal --force -I m4
16:59:10 ERROR| [stderr] autoreconf: configure.ac: tracing
16:59:11 ERROR| [stderr] autoreconf: running: libtoolize --install --copy --force
16:59:21 ERROR| [stderr] autoreconf: running: /usr/bin/autoconf --force
16:59:51 ERROR| [stderr] autoreconf: running: /usr/bin/autoheader --force
17:00:03 ERROR| [stderr] autoreconf: running: automake --add-missing --copy --force-missing
17:00:50 ERROR| [stderr] configure.ac:157: installing `./compile'
17:00:50 ERROR| [stderr] configure.ac:16: installing `./missing'
17:00:50 ERROR| [stderr] src/daemon/Makefile.am: installing `./depcomp'
17:00:51 ERROR| [stderr] src/libecryptfs-swig/Makefile.am:6: installing `./py-compile'
Write failed: Broken pipe
+ RCTEMP=255
+ SSH_PARMS=
+ return 255
+ printf 'Tests on clean-lucid-server-amd64 ending (we think)\n'
Tests on clean-lucid-server-amd64 ending (we think)
+ sys_ssh ubuntu at 192.168.123.64 'dmesg>dmesg-current.log'
+ REMOTE=ubuntu at 192.168.123.64
+ shift
+ ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o CheckHostIP=no -i /var/lib/ubuntu-iso-testing/kernel-sru/ssh-keys/qa-ubuntu ubuntu at 192.168.123.64 'dmesg>dmesg-current.log'
ssh: connect to host 192.168.123.64 port 22: No route to host
+ RCTEMP=255
+ SSH_PARMS=
+ return 255
+ sys_ssh ubuntu at 192.168.123.64 'cp /var/log/dmesg car_log_dmesg.log'
+ REMOTE=ubuntu at 192.168.123.64
+ shift
+ ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o CheckHostIP=no -i /var/lib/ubuntu-iso-testing/kernel-sru/ssh-keys/qa-ubuntu ubuntu at 192.168.123.64 'cp /var/log/dmesg car_log_dmesg.log'
ssh: connect to host 192.168.123.64 port 22: No route to host
+ RCTEMP=255
+ SSH_PARMS=
+ return 255
+ sys_ssh ubuntu at 192.168.123.64 'cp /var/log/syslog car_log_syslog.log'
+ REMOTE=ubuntu at 192.168.123.64
+ shift
+ ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o CheckHostIP=no -i /var/lib/ubuntu-iso-testing/kernel-sru/ssh-keys/qa-ubuntu ubuntu at 192.168.123.64 'cp /var/log/syslog car_log_syslog.log'
ssh: connect to host 192.168.123.64 port 22: No route to host
+ RCTEMP=255
+ SSH_PARMS=
+ return 255
+ sys_ssh ubuntu at 192.168.123.64 'cp /tmp/workspace/* .'
+ REMOTE=ubuntu at 192.168.123.64
+ shift
+ ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o CheckHostIP=no -i /var/lib/ubuntu-iso-testing/kernel-sru/ssh-keys/qa-ubuntu ubuntu at 192.168.123.64 'cp /tmp/workspace/* .'
ssh: connect to host 192.168.123.64 port 22: No route to host
+ RCTEMP=255
+ SSH_PARMS=
+ return 255
+ sys_scp_in ubuntu at 192.168.123.64 '*' .
+ scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o CheckHostIP=no -i /var/lib/ubuntu-iso-testing/kernel-sru/ssh-keys/qa-ubuntu 'ubuntu at 192.168.123.64:*' .
ssh: connect to host 192.168.123.64 port 22: No route to host
+ RCTEMP=1
+ SCP_PARMS=
+ return 1
+ grep BUG: dmesg-current.log var_log_dmesg.log var_log_syslog.log
grep: dmesg-current.log: No such file or directory
grep: var_log_dmesg.log: No such file or directory
grep: var_log_syslog.log: No such file or directory
+ bzip2 dmesg-current.log var_log_dmesg.log var_log_syslog.log
bzip2: Can't open input file dmesg-current.log: No such file or directory.
bzip2: Can't open input file var_log_dmesg.log: No such file or directory.
bzip2: Can't open input file var_log_syslog.log: No such file or directory.
+ virsh destroy clean-lucid-server-amd64
error: Failed to destroy domain clean-lucid-server-amd64
error: Requested operation is not valid: domain is not running
+ exit 0
+ exit 0
[locks-and-latches] Releasing all the locks
[locks-and-latches] All the locks released
Archiving artifacts
Recording test results
Test reports were found but none of them are new. Did tests run?
For example, <http://10.189.74.2:8080/job/sru_kernel-oneiric_lts_hwe-server_amd64-kvm-virtual/ws/kernel-results.xml> is 8 days 0 hr old
Build step 'Publish JUnit test result report' changed build result to FAILURE
Description set:
More information about the ubuntu-testing-notifications
mailing list