Build failed in Jenkins: sru_kernel-lucid-generic_i386-intel_64-mga_g200ew #19

Jenkins Notification devnull at canonical.com
Thu Apr 18 02:17:36 UTC 2013


See <http://10.189.74.2:8080/job/sru_kernel-lucid-generic_i386-intel_64-mga_g200ew/19/>

------------------------------------------
[...truncated 14 lines...]
<type 'exceptions.KeyError'>:'36cPZIlr34uiG5gmr7AMgfea5TcuoPmM8g=='
Warning: Permanently added '10.98.0.1' (ECDSA) to the list of known hosts.
telnet> set binary
Negotiating binary mode with remote host.
telnet> open 10.98.0.32 -23
Trying 10.98.0.32...
Connected to 10.98.0.32.
Escape character is '^]'.


Sentry Switched CDU Version 7.0e

Username: ubuntu
Password: 

Location: 1SS-A-03-BF

Switched CDU: STATUS

   Outlet   Outlet                    Outlet     Control
   ID       Name                      Status     State

   .A1      TowerA_Outlet1            On         Idle On   
   .A2      TowerA_Outlet2            On         Idle On   
   .A3      TowerA_Outlet3            On         Idle On   
   .A4      TowerA_Outlet4            On         Idle On   
   .A5      Aldebaran_Ext_Disk        On         Idle On   
   .A6      TowerA_Outlet6            On         Idle On   
   .A7      TowerA_Outlet7            On         Idle On   
   .A8      Rukbah                    On         On        
   .A9      Phact                     On         On        
   .A10     Alkaid                    On         On        
   .A11     Tarf                      On         On        
   .A12     Aldebaran_PS2             On         Idle On   
   .A13     Wazn_PS2                  On         Idle On   
   .A14     TowerA_Outlet14           On         Idle On   
   .A15     Alderamin_PS2             On         On        
   .A16     Albali_PS2                On         Idle On   

   Command successful

Switched CDU: LIST OUTLETS

   Outlet   Outlet
   ID       Name

   .A1      TowerA_Outlet1          
   .A2      TowerA_Outlet2          
   .A3      TowerA_Outlet3          
   .A4      TowerA_Outlet4          
   .A5      Aldebaran_Ext_Disk      
   .A6      TowerA_Outlet6          
   .A7      TowerA_Outlet7          
   .A8      Rukbah                  
   .A9      Phact                   
   .A10     Alkaid                  
   .A11     Tarf                    
   .A12     Aldebaran_PS2           
   .A13     Wazn_PS2                
   .A14     TowerA_Outlet14         
   .A15     Alderamin_PS2           
   .A16     Albali_PS2              

   Command successful

Switched CDU: off .A10

   Outlet   Outlet                    Outlet     Control
   ID       Name                      Status     State

   .A10     Alkaid                    Off        Off       

   Command successful

Switched CDU: STATUS

   Outlet   Outlet                    Outlet     Control
   ID       Name                      Status     State

   .A1      TowerA_Outlet1            On         Idle On   
   .A2      TowerA_Outlet2            On         Idle On   
   .A3      TowerA_Outlet3            On         Idle On   
   .A4      TowerA_Outlet4            On         Idle On   
   .A5      Aldebaran_Ext_Disk        On         Idle On   
   .A6      TowerA_Outlet6            On         Idle On   
   .A7      TowerA_Outlet7            On         Idle On   
   .A8      Rukbah                    On         On        
   .A9      Phact                     Off        Off       
   .A10     Alkaid                    Off        Off       
   .A11     Tarf                      Off        Off       
   .A12     Aldebaran_PS2             On         Idle On   
   .A13     Wazn_PS2                  On         Idle On   
   .A14     TowerA_Outlet14           On         Idle On   
   .A15     Alderamin_PS2             On         On        
   .A16     Albali_PS2                On         Idle On   

   Command successful

Switched CDU:Success: Powered OFF
Warning: Permanently added '10.98.0.1' (ECDSA) to the list of known hosts.
telnet> set binary
Negotiating binary mode with remote host.
telnet> open 10.98.0.32 -23
Trying 10.98.0.32...
Connected to 10.98.0.32.
Escape character is '^]'.


Sentry Switched CDU Version 7.0e

Username: ubuntu
Password: 

Location: 1SS-A-03-BF

Switched CDU: STATUS

   Outlet   Outlet                    Outlet     Control
   ID       Name                      Status     State

   .A1      TowerA_Outlet1            On         Idle On   
   .A2      TowerA_Outlet2            On         Idle On   
   .A3      TowerA_Outlet3            On         Idle On   
   .A4      TowerA_Outlet4            On         Idle On   
   .A5      Aldebaran_Ext_Disk        On         Idle On   
   .A6      TowerA_Outlet6            On         Idle On   
   .A7      TowerA_Outlet7            On         Idle On   
   .A8      Rukbah                    On         On        
   .A9      Phact                     Off        Off       
   .A10     Alkaid                    Off        Off       
   .A11     Tarf                      Off        Off       
   .A12     Aldebaran_PS2             On         Idle On   
   .A13     Wazn_PS2                  On         Idle On   
   .A14     TowerA_Outlet14           On         Idle On   
   .A15     Alderamin_PS2             On         On        
   .A16     Albali_PS2                On         Idle On   

   Command successful

Switched CDU: LIST OUTLETS

   Outlet   Outlet
   ID       Name

   .A1      TowerA_Outlet1          
   .A2      TowerA_Outlet2          
   .A3      TowerA_Outlet3          
   .A4      TowerA_Outlet4          
   .A5      Aldebaran_Ext_Disk      
   .A6      TowerA_Outlet6          
   .A7      TowerA_Outlet7          
   .A8      Rukbah                  
   .A9      Phact                   
   .A10     Alkaid                  
   .A11     Tarf                    
   .A12     Aldebaran_PS2           
   .A13     Wazn_PS2                
   .A14     TowerA_Outlet14         
   .A15     Alderamin_PS2           
   .A16     Albali_PS2              

   Command successful

Switched CDU: on .A10

   Outlet   Outlet                    Outlet     Control
   ID       Name                      Status     State

   .A10     Alkaid                    On         On        

   Command successful

Switched CDU: STATUS

   Outlet   Outlet                    Outlet     Control
   ID       Name                      Status     State

   .A1      TowerA_Outlet1            On         Idle On   
   .A2      TowerA_Outlet2            On         Idle On   
   .A3      TowerA_Outlet3            On         Idle On   
   .A4      TowerA_Outlet4            On         Idle On   
   .A5      Aldebaran_Ext_Disk        On         Idle On   
   .A6      TowerA_Outlet6            On         Idle On   
   .A7      TowerA_Outlet7            On         Idle On   
   .A8      Rukbah                    On         On        
   .A9      Phact                     On         On        
   .A10     Alkaid                    On         On        
   .A11     Tarf                      On         On        
   .A12     Aldebaran_PS2             On         Idle On   
   .A13     Wazn_PS2                  On         Idle On   
   .A14     TowerA_Outlet14           On         Idle On   
   .A15     Alderamin_PS2             On         On        
   .A16     Albali_PS2                On         Idle On   

   Command successful

Switched CDU:Success: Powered ON
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
ssh: Could not resolve hostname Alkaid: Temporary failure in name resolution
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Unable to obtain lock file:///var/lib/ubuntu-iso-testing/kernel-sru/branches/tests/ held by usit on alderamin (process #20879), acquired 1 second ago.
Will continue to try until 22:16:29, unless you press Ctrl-C.
See "bzr help break-lock" for more.
Using saved parent location: http://bazaar.launchpad.net/~hggdh2/ue-qa-kernel-tests-infrastructure/trunk/
No revisions or tags to pull.
<http://10.189.74.2:8080/job/sru_kernel-lucid-generic_i386-intel_64-mga_g200ew/ws/>
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
mkdir: cannot create directory ���autotest���: File exists
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
mkdir: cannot create directory ���kernel-testing���: File exists
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
No LSB modules are available.
Traceback (most recent call last):
  File "./kernel-test-new", line 429, in <module>
    os.chdir(QRT_PATH)
OSError: [Errno 2] No such file or directory: '/opt/canonical.com/qa-regression-testing/scripts/'
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Ubuntu 3.8.0-18.28-generic 3.8.6
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
scp: autotest: not a regular file
scp: kernel-testing: not a regular file
scp: tests-current: not a regular file
Warning: Permanently added 'alkaid' (ECDSA) to the list of known hosts.
ls: cannot access QRT_step1: No such file or directory
FAIL rebooted, but install step did not finish. Aborting run
+ exit 1
Build step 'Execute shell' marked build as failure
[locks-and-latches] Releasing all the locks
[locks-and-latches] All the locks released
Archiving artifacts
Recording test results
Description set: 



More information about the ubuntu-testing-notifications mailing list