ATI Radeon

Mon Oct 4 19:02:17 UTC 2004

Looks like the fglrx module is loaded okay, and AGP doesnt report any
errors...

Can you print off the output from running fglrxinfo? I get:

uluru:/home/robsh# fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9800 Pro Generic
OpenGL version string: 1.3.4510 (X4.3.0-3.12.0)

Cheers,
Rob.

On Mon, 2004-10-04 at 15:42 +0200, Luis Hidalgo wrote:
> Yes, here it is :)
> psyk at NetSphere:~ $ dmesg
> Linux version 2.6.8.1-3-386 (buildd at macaroni) (gcc version 3.3.4
> (Debian 1:3.3.4-9ubuntu5)) #1 Mon Sep 27 10:50:47 UTC 2004
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
>  BIOS-e820: 0000000017ff0000 - 0000000017ff8000 (ACPI data)
>  BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS)
>  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 383MB LOWMEM available.
> On node 0 totalpages: 98288
>   DMA zone: 4096 pages, LIFO batch:1
>   Normal zone: 94192 pages, LIFO batch:16
>   HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> ACPI: RSDP (v000 AMI                                   ) @ 0x000fa970
> ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x17ff0000
> ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x17ff0030
>   >>> ERROR: Invalid checksum
> ACPI: DSDT (v001    VIA   VT8371 0x00001000 MSFT 0x0100000b) @ 0x00000000
> ACPI: Unable to map DSDT
> ACPI: DSDT not present
> ACPI: DSDT not present
> ACPI: DSDT not present
> ACPI: DSDT not present
> Built 1 zonelists
> Kernel command line: root=/dev/hda3 ro quiet splash
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Initializing CPU#0
> PID hash table entries: 2048 (order 11: 16384 bytes)
> Detected 1000.466 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 382284k/393152k available (1329k kernel code, 10116k reserved,
> 725k data, 204k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay loop... 1966.08 BogoMIPS
> Security Scaffold v1.0.0 initialized
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
> CPU: After vendor identify, caps:  0183fbff c1c7fbff 00000000 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> CPU: After all inits, caps:        0183fbff c1c7fbff 00000000 00000020
> CPU: AMD Athlon(tm) Processor stepping 02
> Enabling fast FPU save and restore... done.
> Checking 'hlt' instruction... OK.
> Checking for popad bug... OK.
>     ACPI-0196: *** Warning: Invalid checksum in table [FACP] (9E, sum
> A5 is not zero)
> ACPI: IRQ9 SCI: Edge set to Level Trigger.
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 999.0867 MHz.
> ..... host bus clock speed is 199.0973 MHz.
> checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
> Freeing initrd memory: 4112k freed
> NET: Registered protocol family 16
> EISA bus registered
> PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040816
> spurious 8259A interrupt: IRQ7.
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Power Resource [URP1] (off)
> ACPI: Power Resource [URP2] (off)
> ACPI: Power Resource [FDDP] (off)
> ACPI: Power Resource [LPTP] (off)
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> PnPBIOS: Scanning system for PnP BIOS support...
> PnPBIOS: Found PnP BIOS installation structure at 0xc00f71d0
> PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5f74, dseg 0xf0000
> PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
> PCI: Using ACPI for IRQ routing
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
> ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
> devfs: boot_options: 0x0
> Initializing Cryptographic API
> Applying VIA southbridge workaround.
> PCI: Disabling Via external APIC routing
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on isa0060/serio0
> EISA: Probing bus 0 at eisa0
> EISA: Detected 0 cards.
> NET: Registered protocol family 2
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> ACPI: (supports S0 S1 S4 S5)
> ACPI wakeup devices:
> PCI0 UAR1  USB USB1  MC9
> RAMDISK: cramfs filesystem found at block 0
> RAMDISK: Loading 4112 blocks [1 disk] into ram disk... done.
> VFS: Mounted root (cramfs filesystem) readonly.
> Freeing unused kernel memory: 204k freed
> vesafb: probe of vesafb0 failed with error -6
> ACPI: Processor [CPU1] (supports C1, 16 throttling states)
> NET: Registered protocol family 1
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:07.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
>     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
> hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
> Using anticipatory io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 128KiB
> hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63, UDMA(33)
>  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > p3
> hdc: LG DVD-ROM DRD-8120B, ATAPI CD/DVD-ROM drive
> hdd: SONY CD-RW CRX140E, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 245912k swap on /dev/hda7.  Priority:-1 extents:1
> EXT3 FS on hda3, internal journal
> mice: PS/2 mouse device common for all mice
> hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport_pc: Via 686A parallel port: io=0x378
> lp0: using parport0 (polling).
> fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
> Starnberg, GERMANY' taints kernel.
> [fglrx] Maximum main memory to use for locked dma buffers: 315 MBytes.
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
> [fglrx] module loaded - fglrx 3.12.0 [Jul 16 2004] on minor 0
> Capability LSM initialized
> device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> cdrom: open failed.
> cdrom: open failed.
> cdrom: open failed.
> Real Time Clock Driver v1.12
> input: PC Speaker
> inserting floppy driver for 2.6.8.1-3-386
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
> agpgart: Maximum main memory to use for agp memory: 321M
> agpgart: AGP aperture is 64M @ 0xe0000000
> cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> shpchp: shpc_init : shpc_cap_offset == 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
> uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
> uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (#2)
> uhci_hcd 0000:00:07.3: irq 10, io base 0000d800
> uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> usb 1-2: new full speed USB device using address 2
> hub 1-2:1.0: USB hub found
> hub 1-2:1.0: 4 ports detected
> usb 1-2.2: new full speed USB device using address 3
> usb 1-2.3: new low speed USB device using address 4
> usbcore: registered new driver hiddev
> input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.2-2.3
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> ts: Compaq touchscreen protocol output
> 8139too Fast Ethernet driver 0.9.27
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12
> eth0: RealTek RTL8139 at 0xd000, 00:e0:29:65:f6:72, IRQ 12
> eth0:  Identified 8139 chip type 'RTL-8139B'
> ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
> gameport: pci0000:00:0c.1 speed 1242 kHz
> eth1: register usbnet at usb-0000:00:07.2-2.2, CDC Ethernet Device
> usbcore: registered new driver usbnet
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> NET: Registered protocol family 17
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c02c9d00(lo)
> IPv6 over IPv4 tunneling driver
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> Linux Kernel Card Services
>   options:  [pci] [cardbus] [pm]
> Intel ISA PCIC probe: not found.
> Device 'i823650' does not have a release() function, it is broken and
> must be fixed.
> Badness in device_release at drivers/base/core.c:85
>  [<c018bcd4>] kobject_cleanup+0x40/0x65
>  [<d894ae11>] init_i82365+0x6f/0x179 [i82365]
>  [<c012b0ce>] sys_init_module+0xe3/0x1d4
>  [<c0105f49>] sysenter_past_esp+0x52/0x71
> eth0: no IPv6 routers present
> Fire GL built-in AGP-support
> Based on agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 321M
> agpgart: Detected Via Apollo KT133/KM133 chipset
> agpgart: AGP aperture is 64M @ 0xe0000000
> Power management callback for AGP chipset installed
> [fglrx] AGP detected, AgpState   = 0x1f000207 (hardware caps of chipset)
> AGP: Found 2 AGPv2 devices
> AGP: Doing enable for AGPv2
> [fglrx] AGP enabled,  AgpCommand = 0x1f000304 (selected caps)
> [fglrx] free  AGP = 54800384
> [fglrx] max   AGP = 54800384
> [fglrx] free  LFB = 116391936
> [fglrx] max   LFB = 116391936
> [fglrx] free  Inv = 0
> [fglrx] max   Inv = 0
> [fglrx] total Inv = 0
> [fglrx] total TIM = 0
> [fglrx] total FB  = 0
> [fglrx] total AGP = 16384
> 
> 
> Thanks in advance,
> 
> Luis.
> 
> 
> On Mon, 04 Oct 2004 13:15:38 +0100, Rob Sharp <rob at quannum.co.uk> wrote:
> > Hi
> > 
> > After trying to run one of these openGL applications, could you run
> > "dmesg" from a terminal and paste the output to this list, please?
> > 
> > Regards,
> > Rob.
> > 
> > 
> > 
> > 
> > On Mon, 2004-10-04 at 12:39, Luis Hidalgo wrote:
> > > Hi, first of all, sorry for my bad english (i'm a spanish boy), I have
> > > installed Ubuntu Linux 4.10 and it works fine, no problems at all and
> > > very stable and fast, but I can't install the ATI drivers and have 3d
> > > acceleration. I've tried to install the fglrx drivers from the ubuntu
> > > apt repository, but It doesn't, after installing that and running
> > > glxinfo it says that Direct Rendering is enabled, but ALL the opengl
> > > programs/games that I run goes very slow and with problems, and the
> > > fgl_glxgears only gives 200fps, when the normal is ~3000.
> > >
> > > Any idea?
> > > Thanks for advance and sorry for my bad english.
> > >
> > > --
> > > ¡Semper Corruptvs!
> > 
> > 
> 
> 
> 
> -- 
> ¡Semper Corruptvs!
> 