lspci on 12.04 not showing hauppauge PVR-150 no video devices.

[Mike McMullin]

On Wed, 2013-06-05 at 08:21 +0100, Colin Law wrote:
> On 5 June 2013 08:13, Mike McMullin <mwmcmlln at mnsi.net> wrote:
> > ...
> >   Okay from 13.04i386 lspci -vv:
> > 03:05.0 Communication controller: Conexant Systems, Inc. Device 2f10
> > (rev 01)
> >         Subsystem: U.S. Robotics Device 2013
> >         Flags: bus master, medium devsel, latency 64, IRQ 11
> >         Memory at febf0000 (32-bit, non-prefetchable) [size=64K]
> >         I/O ports at e800 [size=8]
> >         Capabilities: [40] Power Management version 2
> >
> > 03:06.0 Multimedia video controller: Device 0000:8210 (rev 01)
> >         !!! Unknown header type 7f
> 
> That is not good.  Are you able to check the card in the old computer
> and make sure it still works?  You could boot that from the live image
> and see what it says.  It may be that the card is broken.

  I can confirm that the hardware does indeed work, it's back on the old
system, also I can confirm that:

03:06.0 Multimedia video controller: Gammagraphx, Inc. (or missing ID)
Device 8210 (rev 01) !!! Unknown header type 7f

  Is how the new system sees it, the old system sees it as:

01:07.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
	Subsystem: Hauppauge computer works Inc. Device 8003
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ivtv
	Kernel modules: ivtv

  So yeah we have an issue getting it properly recognized on 12.04.
Good news is that the PCIe 1800 shipped on the 5th, should be in on
Monday.  ($35Can, not that bad.)