how to make sure bridge interface is up with netplan after reboot

[mabi]

On March 10, 2018 12:48 AM, Tom H <tomh0665 at gmail.com> wrote:


> If you assign "0.0.0.0/0" to xenbr1, there should be a xenbr1
> 
> ".network" file in "/run/systemd/network/" to go with the xenbr1
> 
> ".netdev" one and xenbr1'll be brought up. Untested, so I hope!

Using 0.0.0.0/0 did not work but I used 0.0.0.0/32 instead and it worked. My xenbr1 interface is then automatically in the UP state at reboot. Thanks for the tip!