Lenovo Ideacentre - how to start on power application?

[Liam Proven]

On Wed, 16 Oct 2024 at 18:03, Bo Berglund <bo.berglund at gmail.com> wrote:
>
> I have a Lenovo Ideacentre 307ADA05 also named as Lenovo 90MV on its serial
> number label.

Just for what it's worth, the firmware was updated this March.

https://pcsupport.lenovo.com/us/en/products/desktops-and-all-in-ones/3-series/ideacentre-3-07ada05/downloads/driver-list/component?name=BIOS%2FUEFI&id=5AC6A815-321D-440E-8833-B07A93E0428C

> Is there some setting that can be made on this machine that tells it to start if
> power has been cycled? I.e. when power unexpectedly disappears and then returns
> again it should start up normally.

Usually it is in the BIOS/UEFI somewhere. Contrary to other comments,
I've seen this in lots of machines including consumer-level kit.

It might be called "power state on power failure" or something like that.


-- 
Liam Proven ~ Profile: https://about.me/liamproven
Email: lproven at cix.co.uk ~ gMail/gTalk/FB: lproven at gmail.com
Twitter/LinkedIn: lproven ~ Skype: liamproven
IoM: (+44) 7624 227612: UK: (+44) 7939-087884
Czech [+ WhatsApp/Telegram/Signal]: (+420) 702-829-053