Public bug reported:
Binary package hint: xserver-xorg-input-aiptek
Hi there,
I installed xorg-input-aiptek and followed the guide at
XXXXXXXXXXXXXXXX. The pen on my Aiptek tablet works but without clicks
or pressure sensitivity. It also moves the cursor only when the pen is
actually touching the tablet. On further investigation, there's no
aiptektablet created in /udev/input. It seems to be registering as
input6. Here's a bunch of other possibly relevant data:
===========================
ls /dev/input shows:
by-id by-path event0 event1 event2 event3 event4 event5 event6
mice mouse0 mouse1 mouse2
===========================
udevadm info -a -p /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input6 gives:
looking at device '/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input6':
KERNEL=="input6"
SUBSYSTEM=="input"
DRIVER==""
ATTR{name}=="Aiptek"
ATTR{phys}=="usb-0000:00:12.0-2/input0"
ATTR{uniq}==""
ATTR{modalias}=="input:b0003v08CAp0010e0105-e0,1,2,3,4,k80,81,82,83,84,85,86,87,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,110,111,112,140,141,142,143,144,146,147,14A,14B,14C,r0,1,8,a0,1,8,18,1A,1B,28,m0,lsfw"
looking at parent device '/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0':
KERNELS=="3-2:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="aiptek"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="01"
ATTRS{bInterfaceClass}=="03"
ATTRS{bInterfaceSubClass}=="00"
ATTRS{bInterfaceProtocol}=="00"
ATTRS{modalias}=="usb:v08CAp0010d0105dc00dsc00dp00ic03isc00ip00"
ATTRS{supports_autosuspend}=="0"
ATTRS{size}=="6000x4500"
ATTRS{pointer_mode}=="either"
ATTRS{coordinate_mode}=="absolute"
ATTRS{tool_mode}=="pen"
ATTRS{xtilt}=="disable"
ATTRS{ytilt}=="disable"
ATTRS{jitter}=="50"
ATTRS{delay}=="400"
ATTRS{event_count}=="1"
ATTRS{diagnostic}=="no errors"
ATTRS{odm_code}=="0x0200"
ATTRS{model_code}=="0x00c9"
ATTRS{firmware_code}=="0105"
ATTRS{stylus_lower}=="lower"
ATTRS{stylus_upper}=="upper"
ATTRS{mouse_left}=="left"
ATTRS{mouse_middle}=="middle"
ATTRS{mouse_right}=="right"
ATTRS{wheel}=="0"
ATTRS{execute}=="Write anything to this file to program your tablet."
looking at parent device '/devices/pci0000:00/0000:00:12.0/usb3/3-2':
KERNELS=="3-2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="80"
ATTRS{bMaxPower}==" 26mA"
ATTRS{urbnum}=="27"
ATTRS{idVendor}=="08ca"
ATTRS{idProduct}=="0010"
ATTRS{bcdDevice}=="0105"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="1.5"
ATTRS{busnum}=="3"
ATTRS{devnum}=="2"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="AIPTEK International Inc."
ATTRS{product}=="USB Tablet Series Version 1.05"
looking at parent device '/devices/pci0000:00/0000:00:12.0/usb3':
KERNELS=="usb3"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="39"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="3"
ATTRS{devnum}=="1"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="3"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.28-11-generic ohci_hcd"
ATTRS{product}=="OHCI Host Controller"
ATTRS{serial}=="0000:00:12.0"
ATTRS{authorized_default}=="1"
looking at parent device '/devices/pci0000:00/0000:00:12.0':
KERNELS=="0000:00:12.0"
SUBSYSTEMS=="pci"
DRIVERS=="ohci_hcd"
ATTRS{vendor}=="0x1002"
ATTRS{device}=="0x4397"
ATTRS{subsystem_vendor}=="0x1043"
ATTRS{subsystem_device}=="0x834e"
ATTRS{class}=="0x0c0310"
ATTRS{irq}=="16"
ATTRS{local_cpus}=="ffffffff,ffffffff"
ATTRS{local_cpulist}=="0-63"
ATTRS{modalias}=="pci:v00001002d00004397sv00001043sd0000834Ebc0Csc03i10"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
=================================
and my /etc/udev/rules.d/61-aiptek.rules is:
DRIVERS=="aiptek",ATTRS{size}=="6000x4500",ATTRS{model_code}=="0x00c9",
SYMLINK+="input/aiptektablet"
although it *still* doesn't create the symlink with just:
DRIVERS=="aiptek", SYMLINK+="input/aiptektablet"
=================================
I'm on Kubuntu Jaunty AMD64 updated daily.
** Affects: xserver-xorg-input-aiptek (Ubuntu)
Importance: Undecided
Status: New
--
Aiptek tablet only registers as a mouse in /dev/input
https://bugs.launchpad.net/bugs/361693
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs