[Bug 377263] Re: hddtemp / conky make my hdds noisy
Sebastian Krysmanski
infomail at lordb.de
Mon Jul 13 11:58:27 UTC 2009
Hi,
I've the same problem. The problem is that hddtemp always spins-up the
harddrive when reading the temparerature from drive - although this is
not (always?) necessary. For my harddrive I can use "smartctl" to read
the harddrives temperature without spinning-up the drive.
To check this: Install the packages "smartmontools" and "hdparm". Then
choose a harddrive that isn't going to be used in the next couple of
minutes (in my case this is "/dev/sdc"). Then spin-down the drive:
$ hdparm -Y /dev/sdc
You can check the drive's status by using:
$ hdparm -C /dev/sdc
/dev/sdc:
drive state is: standby
Then use "smartctl" to read the drive's S.M.A.R.T. data (if enabled):
$ smartctl -A /dev/sdc
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
#=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
...
188 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 071 059 000 Old_age Always - 29
194 Temperature_Celsius 0x0022 148 115 000 Old_age Always - 30
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 2618972
...
Run now again:
$ hdparm -C /dev/sdc
In my case the drive is still idle. So it's defenitely a problem with
hddtemp.
--
hddtemp / conky make my hdds noisy
https://bugs.launchpad.net/bugs/377263
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list