[Bug 374190] Re: Unable to burn CD -cannot write 'lead in'
Roushahenry
roushahenry at msn.com
Mon May 11 20:23:09 UTC 2009
Hi Pedro,
I think it must have been the media ie it did not like the CDRs I was
uusing although I tried two types -When I used a DVD-R it burned it OK.
Thanks
Paul
> Date: Mon, 11 May 2009 14:22:08 +0000
> From: pedro at ubuntu.com
> To: roushahenry at msn.com
> Subject: [Bug 374190] Re: Unable to burn CD -cannot write 'lead in'
>
> Thanks for your report, could you run brasero from the command line as:
> brasero --brasero-media-debug &> brasero-debug.txt perform the operation
> to reproduce the bug and attach the resulting file to the report?.
> Thanks in advance
>
> ** Changed in: brasero (Ubuntu)
> Importance: Undecided => Low
>
> ** Changed in: brasero (Ubuntu)
> Status: New => Incomplete
>
> ** Changed in: brasero (Ubuntu)
> Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs)
>
> --
> Unable to burn CD -cannot write 'lead in'
> https://bugs.launchpad.net/bugs/374190
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “brasero” source package in Ubuntu: Incomplete
>
> Bug description:
> I have created the iso image but keep getting an error message that the burner cannot write the Lead in
>
> Suggested it cannot write with the current set of plug ins.
>
> Using 9.04 upgrade to Super Ubuntu.
>
> /home/paul/brasero-session.log
> Checking session consistency (brasero_burn_check_session_consistency burn.c:1905)
> BraseroBurnURI called brasero_job_get_action
> BraseroBurnURI called brasero_job_get_action
> BraseroBurnURI called brasero_job_set_output_size_for_current_track
> BraseroBurnURI stopping
> BraseroBurnURI called brasero_job_get_action
> BraseroBurnURI called brasero_job_get_session_output_size
> BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_VA3KTU.bin toc = none
> BraseroBurnURI called brasero_job_get_action
> BraseroBurnURI called brasero_job_get_current_track
> BraseroBurnURI called brasero_job_get_input_type
> BraseroBurnURI burn:// URI found burn:///brasero-0.iso
> BraseroBurnURI called brasero_job_set_current_action
> BraseroBurnURI called brasero_job_get_current_track
> BraseroBurnURI no burn:// URI found
> BraseroBurnURI called brasero_job_add_track
> BraseroBurnURI called brasero_job_get_action
> BraseroBurnURI Finished track successfully
> BraseroBurnURI stopping
> BraseroWodim called brasero_job_get_action
> BraseroWodim getting varg
> BraseroWodim called brasero_job_get_action
> BraseroWodim got varg:
> BraseroWodim deactivating
> BraseroWodim called brasero_job_get_action
> BraseroWodim getting varg
> BraseroWodim called brasero_job_get_action
> BraseroWodim called brasero_job_get_device
> BraseroWodim called brasero_job_get_flags
> BraseroWodim called brasero_job_get_speed
> BraseroWodim called brasero_job_get_flags
> BraseroWodim called brasero_job_get_input_type
> BraseroWodim called brasero_job_get_fd_in
> BraseroWodim called brasero_job_get_current_track
> BraseroWodim called brasero_job_set_current_action
> BraseroWodim got varg:
> wodim
> -v
> dev=/dev/sr0
> speed=8
> driveropts=burnfree
> -dao
> fs=16m
> -data
> -nopad
> /home/paul/brasero-0.iso
> BraseroWodim Launching command
> BraseroWodim called brasero_job_get_fd_out
> BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: devname: '/dev/sr0'
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: Linux sg driver version: 3.5.27
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: Wodim version: 1.1.9
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: SCSI buffer size: 64512
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: communication breaks or freezes immediately after that.
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stdout: TOC Type: 1 = CD-ROM
> BraseroWodim stderr: Speed set to 1412 KB/s
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stdout: Driveropts: 'burnfree'
> BraseroWodim stdout: Device type : Removable CD-ROM
> BraseroWodim stdout: Version : 5
> BraseroWodim stdout: Response Format: 2
> BraseroWodim stdout: Capabilities :
> BraseroWodim stdout: Vendor_info : 'TSSTcorp'
> BraseroWodim stdout: Identification : 'DVD+-RW TS-H653A'
> BraseroWodim stdout: Revision : 'D500'
> BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> BraseroWodim stdout: Current: 0x0009 (CD-R)
> BraseroWodim stdout: Profile: 0x002B (DVD+R/DL)
> BraseroWodim stdout: Profile: 0x001B (DVD+R)
> BraseroWodim stdout: Profile: 0x001A (DVD+RW)
> BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording)
> BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite)
> BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording)
> BraseroWodim stdout: Profile: 0x0010 (DVD-ROM)
> BraseroWodim stdout: Profile: 0x000A (CD-RW)
> BraseroWodim stdout: Profile: 0x0009 (CD-R) (current)
> BraseroWodim stdout: Profile: 0x0008 (CD-ROM)
> BraseroWodim stdout: Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> BraseroWodim stdout: Driver flags : MMC-3 SWABAUDIO BURNFREE
> BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> BraseroWodim stdout: Drive buf size : 1579776 = 1542 KB
> BraseroWodim stdout: FIFO size : 16777216 = 16384 KB
> BraseroWodim stdout: Track 01: data 208 MB
> BraseroWodim stdout: Total size: 238 MB (23:40.06) = 106505 sectors
> BraseroWodim stdout: Lout start: 239 MB (23:42/05) = 106505 sectors
> BraseroWodim stdout: Current Secsize: 2048
> BraseroWodim stdout: ATIP info from disk:
> BraseroWodim stdout: Indicated writing power: 5
> BraseroWodim stdout: Is not unrestricted
> BraseroWodim stdout: Is not erasable
> BraseroWodim stdout: Disk sub type: Medium Type B, low Beta category (B-) (4)
> BraseroWodim stdout: ATIP start of lead in: -11607 (97:27/18)
> BraseroWodim stdout: ATIP start of lead out: 359849 (79:59/74)
> BraseroWodim stdout: Disk type: Short strategy type (Phthalocyanine or similar)
> BraseroWodim stdout: Manuf. index: 18
> BraseroWodim stdout: Manufacturer: Plasmon Data systems Ltd.
> BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 253344
> BraseroWodim stdout: Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
> BraseroWodim stdout: Last chance to quit, starting real write in 4 seconds.
> BraseroWodim called brasero_job_set_dangerous
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout: 3 seconds.
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout: 2 seconds.
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout:
> BraseroWodim stdout: 1 seconds.
> BraseroWodim stdout:
> BraseroWodim stdout: 0 seconds. Operation starts.
> BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
> BraseroWodim stdout: Performing OPC...
> BraseroWodim stdout: Sending CUE sheet...
> BraseroWodim called brasero_job_get_input_type
> BraseroWodim called brasero_job_set_current_action
> BraseroWodim stderr: wodim: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: Errno: 5 (Input/output error), send_cue_sheet scsi sendcmd: no error
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: CDB: 5D 00 00 00 00 00 00 00 20 00
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stdout: Writing time: 10.563s
> BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stdout: BURN-Free was never needed.
> BraseroWodim stderr: Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: Sense Key: 0x5 Illegal Request, Segment 0
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: Sense flags: Blk 0 (not valid)
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: cmd finished after 0.001s timeout 200s
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: wodim: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: wodim: Cannot send CUE sheet.
> BraseroWodim called brasero_job_get_flags
> BraseroWodim stderr: wodim: Could not write Lead-in.
> BraseroWodim called brasero_job_get_flags
> BraseroWodim called brasero_job_error
> BraseroWodim finished with an error
> BraseroWodim asked to stop because of an error
> error = 12
> message = "An error occurred while writing to disc"
> BraseroWodim stopping
> BraseroWodim got killed
> Session error : An error occurred while writing to disc (brasero_burn_record burn.c:2599)
_________________________________________________________________
View your Twitter and Flickr updates from one place – Learn more!
http://clk.atdmt.com/UKM/go/137984870/direct/01/
--
Unable to burn CD -cannot write 'lead in'
https://bugs.launchpad.net/bugs/374190
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list