[Bug 469636] [NEW] Wrong CPU frequencies reported, cannot run max freq
zimcomm at hotmail.com
zimcomm at hotmail.com
Sun Nov 1 22:31:11 UTC 2009
Public bug reported:
Updated to Karmic today.
G31M-ES2L motherboard, Intel E5200 processor. BIOS is updated to
latest. This worked under 9.04.
Proc is 2.5GHz, but I cannot get anything faster than 1.9GHz according
to all info I check (and performance lag would tend to back this up).
>cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Pentium(R) Dual-Core CPU E5200 @ 2.50GHz
>more /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1900000
>cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
1900000 1200000
>dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd at rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] modified: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37868000 - 37fef34a
[ 0.000000] Allocated new RAMDISK: 008ad000 - 0103434a
[ 0.000000] Move RAMDISK from 0000000037868000 - 0000000037fef349 to 008ad000 - 01034349
[ 0.000000] ACPI: RSDP 000f6bf0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT bfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP bfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT bfee3180 040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS bfee0000 00040
[ 0.000000] ACPI: HPET bfee73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG bfee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC bfee72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT bfee7ae0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac0f6] BRK ==> [00008a9000 - 00008ac0f6]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 000103434a] NEW RAMDISK ==> [00008ad000 - 000103434a]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f5200] f5200
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfee0
[ 0.000000] On node 0 totalpages: 786043
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1035000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4366 pages used for memmap
[ 0.000000] HighMem zone: 554452 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c2845000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779901
[ 0.000000] Kernel command line: root=UUID=4aa5b8ac-44a3-4673-ba51-fcf6c8a8e43e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 15722880 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfee0)
[ 0.000000] Memory: 3086644k/3144576k available (4565k kernel code, 56616k reserved, 2143k data, 540k init, 2235272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2499.519 MHz processor.
[ 0.001391] Console: colour VGA+ 80x25
[ 0.001395] console [tty0] enabled
[ 0.001533] hpet clockevent registered
[ 0.001536] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001542] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.03 BogoMIPS (lpj=9998076)
[ 0.001559] Security Framework initialized
[ 0.001579] AppArmor: AppArmor initialized
[ 0.001587] Mount-cache hash table entries: 512
[ 0.001712] Initializing cgroup subsys ns
[ 0.001717] Initializing cgroup subsys cpuacct
[ 0.001722] Initializing cgroup subsys memory
[ 0.001729] Initializing cgroup subsys freezer
[ 0.001731] Initializing cgroup subsys net_cls
[ 0.001746] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001749] CPU: L2 cache: 2048K
[ 0.001752] CPU: Physical Processor ID: 0
[ 0.001753] CPU: Processor Core ID: 0
[ 0.001757] mce: CPU supports 6 MCE banks
[ 0.001765] CPU0: Thermal monitoring enabled (TM2)
[ 0.001769] using mwait in idle threads.
[ 0.001775] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001783] ... version: 2
[ 0.001785] ... bit width: 40
[ 0.001787] ... generic counters: 2
[ 0.001789] ... value mask: 000000ffffffffff
[ 0.001791] ... max period: 000000007fffffff
[ 0.001793] ... fixed-purpose counters: 3
[ 0.001795] ... counter mask: 0000000700000003
[ 0.001801] Checking 'hlt' instruction... OK.
[ 0.019030] ACPI: Core revision 20090521
[ 0.026123] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065806] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4999.95 BogoMIPS (lpj=9999908)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.153672] CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a
[ 0.153688] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156021] Brought up 2 CPUs
[ 0.156024] Total of 2 processors activated (9998.99 BogoMIPS).
[ 0.156069] CPU0 attaching sched-domain:
[ 0.156072] domain 0: span 0-1 level MC
[ 0.156075] groups: 0 1
[ 0.156080] CPU1 attaching sched-domain:
[ 0.156083] domain 0: span 0-1 level MC
[ 0.156085] groups: 1 0
[ 0.156163] Booting paravirtualized kernel on bare hardware
[ 0.156232] regulator: core version 0.5
[ 0.156232] Time: 20:50:57 Date: 11/01/09
[ 0.156232] NET: Registered protocol family 16
[ 0.156232] EISA bus registered
[ 0.156232] ACPI: bus type pci registered
[ 0.156293] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
[ 0.156296] PCI: MCFG area at c0000000 reserved in E820
[ 0.156298] PCI: Using MMCONFIG for extended config space
[ 0.156300] PCI: Using configuration type 1 for base access
[ 0.157394] bio: create slab <bio-0> at 0
[ 0.160374] ACPI: EC: Look up EC in DSDT
[ 0.165607] ACPI: Interpreter enabled
[ 0.165621] ACPI: (supports S0 S3 S4 S5)
[ 0.165645] ACPI: Using IOAPIC for interrupt routing
[ 0.170071] ACPI: No dock devices found.
[ 0.170166] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.170280] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.170283] pci 0000:00:01.0: PME# disabled
[ 0.170350] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe5100000-0xe5103fff]
[ 0.170394] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.170399] pci 0000:00:1b.0: PME# disabled
[ 0.170460] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.170464] pci 0000:00:1c.0: PME# disabled
[ 0.170526] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.170531] pci 0000:00:1c.1: PME# disabled
[ 0.170582] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
[ 0.170632] pci 0000:00:1d.1: reg 20 io port: [0xe100-0xe11f]
[ 0.170683] pci 0000:00:1d.2: reg 20 io port: [0xe200-0xe21f]
[ 0.170733] pci 0000:00:1d.3: reg 20 io port: [0xe300-0xe31f]
[ 0.170782] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe5104000-0xe51043ff]
[ 0.170948] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.170952] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.170956] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.170960] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.171011] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.171018] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.171024] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.171031] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.171037] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.171062] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.171066] pci 0000:00:1f.2: PME# disabled
[ 0.171114] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.171169] pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
[ 0.171179] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.171188] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe0000000-0xe1ffffff]
[ 0.171195] pci 0000:01:00.0: reg 24 io port: [0xc000-0xc07f]
[ 0.171201] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.171269] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.171273] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.171278] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.171320] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 0.171374] pci 0000:03:00.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.171395] pci 0000:03:00.0: reg 18 64bit mmio: [0xe5010000-0xe5010fff]
[ 0.171410] pci 0000:03:00.0: reg 20 64bit mmio: [0xe5000000-0xe500ffff]
[ 0.171419] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.171461] pci 0000:03:00.0: supports D1 D2
[ 0.171463] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.171468] pci 0000:03:00.0: PME# disabled
[ 0.171528] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.171533] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe4ffffff]
[ 0.171539] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe5000000-0xe50fffff]
[ 0.171589] pci 0000:00:1e.0: transparent bridge
[ 0.171593] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.171618] pci_bus 0000:00: on NUMA node 0
[ 0.171622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.171810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.171872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.171946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.182258] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.182358] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.182457] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.182556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.182654] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.182753] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.182852] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.182953] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.183143] SCSI subsystem initialized
[ 0.183177] libata version 3.00 loaded.
[ 0.183177] usbcore: registered new interface driver usbfs
[ 0.183177] usbcore: registered new interface driver hub
[ 0.183177] usbcore: registered new device driver usb
[ 0.183177] ACPI: WMI: Mapper loaded
[ 0.183177] PCI: Using ACPI for IRQ routing
[ 0.192011] Bluetooth: Core ver 2.15
[ 0.192032] NET: Registered protocol family 31
[ 0.192032] Bluetooth: HCI device and connection manager initialized
[ 0.192032] Bluetooth: HCI socket layer initialized
[ 0.192032] NetLabel: Initializing
[ 0.192032] NetLabel: domain hash size = 128
[ 0.192032] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.192051] NetLabel: unlabeled traffic allowed by default
[ 0.192092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.192100] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.208014] pnp: PnP ACPI init
[ 0.208028] ACPI: bus type pnp registered
[ 0.210728] pnp: PnP ACPI: found 14 devices
[ 0.210730] ACPI: ACPI bus type pnp unregistered
[ 0.210735] PnPBIOS: Disabled by ACPI PNP
[ 0.210746] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.210749] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.210752] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.210755] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.210758] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.210768] system 00:0a: ioport range 0x400-0x4cf could not be reserved
[ 0.210774] system 00:0b: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.210780] system 00:0c: iomem range 0xce000-0xcffff has been reserved
[ 0.210783] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.210787] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.210790] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.210793] system 00:0c: iomem range 0xbfee0000-0xbfefffff could not be reserved
[ 0.210796] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.210799] system 00:0c: iomem range 0x100000-0xbfedffff could not be reserved
[ 0.210803] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.210806] system 00:0c: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.210809] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.210812] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.210815] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.210818] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.210822] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.245485] AppArmor: AppArmor Filesystem Enabled
[ 0.245527] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.245530] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.245535] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.245539] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.245544] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.245548] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.245553] pci 0000:00:1c.0: MEM window: disabled
[ 0.245556] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.245561] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.245564] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.245570] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe4ffffff
[ 0.245574] pci 0000:00:1c.1: PREFETCH window: 0x000000e5000000-0x000000e50fffff
[ 0.245581] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.245584] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.245589] pci 0000:00:1e.0: MEM window: disabled
[ 0.245593] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.245603] alloc irq_desc for 16 on node -1
[ 0.245605] alloc kstat_irqs on node -1
[ 0.245610] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.245614] pci 0000:00:01.0: setting latency timer to 64
[ 0.245622] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.245626] pci 0000:00:1c.0: setting latency timer to 64
[ 0.245633] alloc irq_desc for 17 on node -1
[ 0.245635] alloc kstat_irqs on node -1
[ 0.245639] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.245643] pci 0000:00:1c.1: setting latency timer to 64
[ 0.245649] pci 0000:00:1e.0: setting latency timer to 64
[ 0.245654] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.245657] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.245659] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.245662] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.245665] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.245668] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.245671] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.245674] pci_bus 0000:03: resource 1 mem: [0xe4000000-0xe4ffffff]
[ 0.245676] pci_bus 0000:03: resource 2 pref mem [0xe5000000-0xe50fffff]
[ 0.245679] pci_bus 0000:04: resource 0 io: [0xa000-0xafff]
[ 0.245682] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.245685] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.245718] NET: Registered protocol family 2
[ 0.245818] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.246134] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.246575] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.246801] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.246804] TCP reno registered
[ 0.246879] NET: Registered protocol family 1
[ 0.246939] Trying to unpack rootfs image as initramfs...
[ 0.460947] Freeing initrd memory: 7708k freed
[ 0.464823] cpufreq-nforce2: No nForce2 chipset.
[ 0.464853] Scanning for low memory corruption every 60 seconds
[ 0.464956] audit: initializing netlink socket (disabled)
[ 0.464972] type=2000 audit(1257108657.464:1): initialized
[ 0.474488] highmem bounce pool size: 64 pages
[ 0.474493] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.476086] VFS: Disk quotas dquot_6.5.2
[ 0.476152] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476746] fuse init (API version 7.12)
[ 0.476837] msgmni has been set to 1679
[ 0.477053] alg: No test for stdrng (krng)
[ 0.477068] io scheduler noop registered
[ 0.477070] io scheduler anticipatory registered
[ 0.477072] io scheduler deadline registered
[ 0.477124] io scheduler cfq registered (default)
[ 0.477227] pci 0000:01:00.0: Boot video device
[ 0.477335] alloc irq_desc for 24 on node -1
[ 0.477338] alloc kstat_irqs on node -1
[ 0.477347] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.477354] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.477454] alloc irq_desc for 25 on node -1
[ 0.477456] alloc kstat_irqs on node -1
[ 0.477463] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.477472] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.477589] alloc irq_desc for 26 on node -1
[ 0.477591] alloc kstat_irqs on node -1
[ 0.477598] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.477607] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.477697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.477776] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.477920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.477924] ACPI: Power Button [PWRF]
[ 0.477978] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.477981] ACPI: Power Button [PWRB]
[ 0.478462] ACPI: SSDT bfee74c0 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.478666] processor LNXCPU:00: registered as cooling_device0
[ 0.478670] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.478869] ACPI: SSDT bfee7980 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.479094] processor LNXCPU:01: registered as cooling_device1
[ 0.479098] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.480786] isapnp: Scanning for PnP cards...
[ 0.501765] Switched to high resolution mode on CPU 1
[ 0.504057] Switched to high resolution mode on CPU 0
[ 0.833761] isapnp: No Plug & Play device found
[ 0.834944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.835044] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.835421] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.836556] brd: module loaded
[ 0.837039] loop: module loaded
[ 0.837108] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.837213] ata_piix 0000:00:1f.2: version 2.13
[ 0.837228] alloc irq_desc for 19 on node -1
[ 0.837230] alloc kstat_irqs on node -1
[ 0.837236] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.837241] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.837276] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.837332] scsi0 : ata_piix
[ 0.837408] scsi1 : ata_piix
[ 0.838047] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.838051] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.838928] Fixed MDIO Bus: probed
[ 0.838964] PPP generic driver version 2.4.2
[ 0.839048] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.839067] alloc irq_desc for 23 on node -1
[ 0.839069] alloc kstat_irqs on node -1
[ 0.839074] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.839084] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.839087] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.839137] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.843049] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.843062] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5104000
[ 0.856015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.856117] usb usb1: configuration #1 chosen from 1 choice
[ 0.856169] hub 1-0:1.0: USB hub found
[ 0.856183] hub 1-0:1.0: 8 ports detected
[ 0.856247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.856263] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.856284] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.856290] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.856293] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.856324] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.856347] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 0.856425] usb usb2: configuration #1 chosen from 1 choice
[ 0.856453] hub 2-0:1.0: USB hub found
[ 0.856459] hub 2-0:1.0: 2 ports detected
[ 0.856509] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.856515] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.856519] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.856554] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.856583] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[ 0.856661] usb usb3: configuration #1 chosen from 1 choice
[ 0.856694] hub 3-0:1.0: USB hub found
[ 0.856700] hub 3-0:1.0: 2 ports detected
[ 0.856746] alloc irq_desc for 18 on node -1
[ 0.856748] alloc kstat_irqs on node -1
[ 0.856753] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.856759] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.856762] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.856796] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.856824] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[ 0.856902] usb usb4: configuration #1 chosen from 1 choice
[ 0.856929] hub 4-0:1.0: USB hub found
[ 0.856935] hub 4-0:1.0: 2 ports detected
[ 0.856979] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.856985] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.856988] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.857019] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.857047] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[ 0.857124] usb usb5: configuration #1 chosen from 1 choice
[ 0.857151] hub 5-0:1.0: USB hub found
[ 0.857157] hub 5-0:1.0: 2 ports detected
[ 0.857264] PNP: No PS/2 controller found. Probing ports directly.
[ 0.857619] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.857628] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.857704] mice: PS/2 mouse device common for all mice
[ 0.857847] rtc_cmos 00:04: RTC can wake from S4
[ 0.857889] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.857912] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.858014] device-mapper: uevent: version 1.0.3
[ 0.858109] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 0.858172] device-mapper: multipath: version 1.1.0 loaded
[ 0.858174] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.858283] EISA: Probing bus 0 at eisa.0
[ 0.858310] EISA: Detected 0 cards.
[ 0.858385] cpuidle: using governor ladder
[ 0.858388] cpuidle: using governor menu
[ 0.858912] TCP cubic registered
[ 0.859076] NET: Registered protocol family 10
[ 0.859556] lo: Disabled Privacy Extensions
[ 0.859911] NET: Registered protocol family 17
[ 0.859930] Bluetooth: L2CAP ver 2.13
[ 0.859932] Bluetooth: L2CAP socket layer initialized
[ 0.859935] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.859937] Bluetooth: SCO socket layer initialized
[ 0.859960] Bluetooth: RFCOMM TTY layer initialized
[ 0.859963] Bluetooth: RFCOMM socket layer initialized
[ 0.859965] Bluetooth: RFCOMM ver 1.11
[ 0.861703] Using IPI No-Shortcut mode
[ 0.861796] PM: Resume from disk failed.
[ 0.861810] registered taskstats version 1
[ 0.861926] Magic number: 1:16:851
[ 0.861998] rtc_cmos 00:04: setting system clock to 2009-11-01 20:50:58 UTC (1257108658)
[ 0.862002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.862004] EDD information not available.
[ 1.020333] ata1.01: HPA unlocked: 1953523055 -> 1953525168, native 1953525168
[ 1.020338] ata1.01: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 1.020342] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.020458] ata2.01: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 1.020462] ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.028361] ata2.01: configured for UDMA/133
[ 1.036734] ata1.01: configured for UDMA/133
[ 1.036878] scsi 0:0:1:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
[ 1.037005] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.037043] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.037091] sd 0:0:1:0: [sda] Write Protect is off
[ 1.037094] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.037119] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.037247] sda:
[ 1.037399] scsi 1:0:1:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 1.037502] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 1.037536] sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.037584] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.037587] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.037611] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.037731] sdb: sdb1
[ 1.042781] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.059999] sda1 sda2 < sda5 >
[ 1.082251] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.082267] Freeing unused kernel memory: 540k freed
[ 1.082532] Write protecting the kernel text: 4568k
[ 1.082578] Write protecting the kernel read-only data: 1836k
[ 1.198888] Linux agpgart interface v0.103
[ 1.213005] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.213023] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.213060] r8169 0000:03:00.0: setting latency timer to 64
[ 1.213104] alloc irq_desc for 27 on node -1
[ 1.213106] alloc kstat_irqs on node -1
[ 1.213120] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 1.213803] eth0: RTL8168c/8111c at 0xf80c0000, 00:24:1d:1d:b6:ea, XID 3c4000c0 IRQ 27
[ 1.243592] Floppy drive(s): fd0 is 1.44M
[ 1.263126] FDC 0 is a post-1991 82077
[ 1.468523] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.680599] usb 2-1: configuration #1 chosen from 1 choice
[ 1.764521] usbcore: registered new interface driver hiddev
[ 1.767806] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 1.767870] generic-usb 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[ 1.772149] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
[ 1.772255] generic-usb 0003:046D:C529.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[ 1.772269] usbcore: registered new interface driver usbhid
[ 1.772272] usbhid: v2.6:USB HID core driver
[ 2.036010] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 2.211576] xor: automatically using best checksumming function: pIII_sse
[ 2.228504] pIII_sse : 6884.000 MB/sec
[ 2.228506] xor: using function: pIII_sse (6884.000 MB/sec)
[ 2.228591] usb 2-2: configuration #1 chosen from 1 choice
[ 2.231148] device-mapper: dm-raid45: initialized v0.2594b
[ 2.252916] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[ 2.253013] generic-usb 0003:046D:C521.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 2.280750] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input6
[ 2.280839] generic-usb 0003:046D:C521.0004: input,hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 7.495504] kjournald starting. Commit interval 5 seconds
[ 7.495517] EXT3-fs: mounted filesystem with writeback data mode.
[ 8.108135] type=1505 audit(1257108665.746:2): operation="profile_load" pid=471 name=/usr/share/gdm/guest-session/Xsession
[ 8.119312] type=1505 audit(1257108665.754:3): operation="profile_load" pid=472 name=/sbin/dhclient3
[ 8.120168] type=1505 audit(1257108665.758:4): operation="profile_load" pid=472 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 8.120604] type=1505 audit(1257108665.758:5): operation="profile_load" pid=472 name=/usr/lib/connman/scripts/dhclient-script
[ 8.146313] type=1505 audit(1257108665.782:6): operation="profile_load" pid=473 name=/usr/bin/evince
[ 8.158673] type=1505 audit(1257108665.794:7): operation="profile_load" pid=473 name=/usr/bin/evince-previewer
[ 8.165982] type=1505 audit(1257108665.802:8): operation="profile_load" pid=473 name=/usr/bin/evince-thumbnailer
[ 8.180757] type=1505 audit(1257108665.818:9): operation="profile_load" pid=475 name=/usr/lib/cups/backend/cups-pdf
[ 8.181741] type=1505 audit(1257108665.818:10): operation="profile_load" pid=475 name=/usr/sbin/cupsd
[ 8.195547] type=1505 audit(1257108665.830:11): operation="profile_load" pid=476 name=/usr/sbin/mysqld
[ 9.077056] Adding 9068652k swap on /dev/sda5. Priority:-1 extents:1 across:9068652k
[ 9.253770] EXT3 FS on sda1, internal journal
[ 9.692039] kjournald starting. Commit interval 5 seconds
[ 9.692569] EXT3 FS on sdb1, internal journal
[ 9.692577] EXT3-fs: mounted filesystem with writeback data mode.
[ 10.588589] udev: starting version 147
[ 11.991066] lp: driver loaded but no devices found
[ 12.313417] parport_pc 00:09: reported by Plug and Play ACPI
[ 12.313461] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 12.320108] ppdev: user-space parallel port driver
[ 12.412249] lp0: using parport0 (interrupt-driven).
[ 13.051285] intel_rng: FWH not detected
[ 13.121290] it87: Found IT8718F chip at 0x290, revision 5
[ 13.121299] it87: in3 is VCC (+5V)
[ 13.830096] coretemp coretemp.0: Using relative temperature scale!
[ 13.830142] coretemp coretemp.1: Using relative temperature scale!
[ 13.855255] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.838914] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.838939] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.046517] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 17.652869] r8169: eth0: link up
[ 17.652876] r8169: eth0: link up
[ 19.523753] __ratelimit: 36 callbacks suppressed
[ 19.523758] type=1503 audit(1257108677.158:24): operation="open" pid=1322 parent=1321 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 20.595097] type=1503 audit(1257108678.230:25): operation="open" pid=1459 parent=1458 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 21.305866] type=1503 audit(1257108678.942:26): operation="open" pid=1581 parent=1469 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 21.835537] type=1503 audit(1257108679.470:27): operation="open" pid=1588 parent=1587 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 22.853002] type=1503 audit(1257108680.490:28): operation="open" pid=1641 parent=1640 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 23.872281] type=1503 audit(1257108680.353:29): operation="open" pid=1652 parent=1651 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 24.893232] type=1503 audit(1257108681.373:30): operation="open" pid=1662 parent=1661 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 25.912555] type=1503 audit(1257108682.393:31): operation="open" pid=1672 parent=1671 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 27.105864] type=1503 audit(1257108683.585:32): operation="open" pid=1689 parent=1688 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 27.248337] type=1503 audit(1257108683.725:33): operation="open" pid=1700 parent=1699 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 27.868009] eth0: no IPv6 routers present
[ 28.982411] nvidia: module license 'NVIDIA' taints kernel.
[ 28.982417] Disabling lock debugging due to kernel taint
[ 29.238830] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 29.238842] nvidia 0000:01:00.0: setting latency timer to 64
[ 29.239004] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 36.613611] NET: Registered protocol family 5
[ 42.004516] CPU0 attaching NULL sched-domain.
[ 42.004524] CPU1 attaching NULL sched-domain.
[ 42.020595] CPU0 attaching sched-domain:
[ 42.020601] domain 0: span 0-1 level MC
[ 42.020606] groups: 0 1
[ 42.020614] CPU1 attaching sched-domain:
[ 42.020617] domain 0: span 0-1 level MC
[ 42.020621] groups: 1 0
** Affects: powersave (Ubuntu)
Importance: Undecided
Status: New
--
Wrong CPU frequencies reported, cannot run max freq
https://bugs.launchpad.net/bugs/469636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list