[Bug 480901] Re: gnome-ppp will not open the serial modem.
Luvo
stephen.loveland at defence.gov.au
Wed Nov 11 22:04:15 UTC 2009
My apologies, here is 2.6.31-15 dmesg;
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-15-generic (buildd at rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003fff0c00 (reserved)
[ 0.000000] BIOS-e820: 000000003fff0c00 - 000000003fffc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fffc000 - 0000000040000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] modified: 000000003ffd0000 - 000000003fff0c00 (reserved)
[ 0.000000] modified: 000000003fff0c00 - 000000003fffc000 (ACPI NVS)
[ 0.000000] modified: 000000003fffc000 - 0000000040000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 377f0000 - 37fefe75
[ 0.000000] Allocated new RAMDISK: 008ad000 - 010ace75
[ 0.000000] Move RAMDISK from 00000000377f0000 - 0000000037fefe74 to 008ad000 - 010ace74
[ 0.000000] ACPI: RSDP 000f6560 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 3fff0c84 0002C (v01 HP CPQ0860 07050420 CPQ 00000001)
[ 0.000000] ACPI: FACP 3fff0c00 00084 (v02 HP CPQ0860 00000002 CPQ 00000001)
[ 0.000000] ACPI: DSDT 3fff0cb0 04F8C (v01 HP nx7000 00010000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fffbe80 00040
[ 0.000000] ACPI: SSDT 3fff5c3c 0028A (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E)
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac13c] BRK ==> [00008a9000 - 00008ac13c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 00010ace75] NEW RAMDISK ==> [00008ad000 - 00010ace75]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ffd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffd0
[ 0.000000] On node 0 totalpages: 261995
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c10ad000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34498 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c18b2000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259947
[ 0.000000] Kernel command line: root=UUID=662405c5-8e8b-4933-b11b-2575b905d6e8 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5241920 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0)
[ 0.000000] Memory: 1017344k/1048384k available (4566k kernel code, 30260k reserved, 2142k data, 540k init, 139080k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575b44 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575b44 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1594.817 MHz processor.
[ 0.001121] Console: colour VGA+ 80x25
[ 0.001125] console [tty0] enabled
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.63 BogoMIPS (lpj=6379268)
[ 0.004032] Security Framework initialized
[ 0.004059] AppArmor: AppArmor initialized
[ 0.004068] Mount-cache hash table entries: 512
[ 0.004217] Initializing cgroup subsys ns
[ 0.004223] Initializing cgroup subsys cpuacct
[ 0.004228] Initializing cgroup subsys memory
[ 0.004238] Initializing cgroup subsys freezer
[ 0.004241] Initializing cgroup subsys net_cls
[ 0.004260] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004263] CPU: L2 cache: 2048K
[ 0.004270] mce: CPU supports 5 MCE banks
[ 0.004279] ------------[ cut here ]------------
[ 0.004290] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40()
[ 0.004294] Hardware name: Pavilion zt3300 (PH518PA#ABG)
[ 0.004297] Modules linked in:
[ 0.004302] Pid: 0, comm: swapper Not tainted 2.6.31-15-generic #50-Ubuntu
[ 0.004306] Call Trace:
[ 0.004316] [<c014518d>] warn_slowpath_common+0x6d/0xa0
[ 0.004321] [<c011d7e3>] ? native_apic_write_dummy+0x33/0x40
[ 0.004326] [<c011d7e3>] ? native_apic_write_dummy+0x33/0x40
[ 0.004331] [<c01451d5>] warn_slowpath_null+0x15/0x20
[ 0.004336] [<c011d7e3>] native_apic_write_dummy+0x33/0x40
[ 0.004343] [<c011278c>] intel_init_thermal+0xac/0x1a0
[ 0.004348] [<c0111dbb>] mce_intel_feature_init+0xb/0x60
[ 0.004353] [<c010fcf0>] mce_cpu_features+0x10/0x40
[ 0.004361] [<c056b22c>] mcheck_init+0x14a/0x188
[ 0.004365] [<c0569668>] ? init_hypervisor+0xb/0x2c
[ 0.004370] [<c0569620>] identify_cpu+0x20e/0x21d
[ 0.004377] [<c0795732>] identify_boot_cpu+0xd/0x23
[ 0.004381] [<c07958c8>] check_bugs+0xb/0xe9
[ 0.004388] [<c078e8c3>] start_kernel+0x2dc/0x2ec
[ 0.004393] [<c078e406>] ? unknown_bootoption+0x0/0x1ab
[ 0.004398] [<c078e07c>] i386_start_kernel+0x7c/0x83
[ 0.004408] ---[ end trace a7919e7f17c0a725 ]---
[ 0.004412] CPU0: Thermal monitoring enabled (TM1)
[ 0.004421] Performance Counters:
[ 0.004425] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.004427] no hardware sampling interrupt available.
[ 0.004430] p6 PMU driver.
[ 0.004436] ... version: 0
[ 0.004439] ... bit width: 32
[ 0.004441] ... generic counters: 2
[ 0.004443] ... value mask: 00000000ffffffff
[ 0.004446] ... max period: 000000007fffffff
[ 0.004448] ... fixed-purpose counters: 0
[ 0.004451] ... counter mask: 0000000000000003
[ 0.004456] Checking 'hlt' instruction... OK.
[ 0.020922] SMP alternatives: switching to UP code
[ 0.028012] Freeing SMP alternatives: 19k freed
[ 0.028021] ACPI: Core revision 20090521
[ 0.037529] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.040072] weird, boot CPU (#0) not listed by the BIOS.
[ 0.040074] SMP motherboard not detected.
[ 0.040077] Local APIC not detected. Using dummy APIC emulation.
[ 0.040079] SMP disabled
[ 0.040233] Brought up 1 CPUs
[ 0.040236] Total of 1 processors activated (3189.63 BogoMIPS).
[ 0.040249] CPU0 attaching NULL sched-domain.
[ 0.040487] Booting paravirtualized kernel on bare hardware
[ 0.044215] regulator: core version 0.5
[ 0.044240] Time: 7:51:43 Date: 11/12/09
[ 0.044298] NET: Registered protocol family 16
[ 0.044450] EISA bus registered
[ 0.044469] ACPI: bus type pci registered
[ 0.045853] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
[ 0.045856] PCI: Using configuration type 1 for base access
[ 0.047076] bio: create slab <bio-0> at 0
[ 0.047875] ACPI: EC: Look up EC in DSDT
[ 0.056279] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.064188] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.616033] ACPI: Interpreter enabled
[ 0.616043] ACPI: (supports S0 S3 S4 S5)
[ 0.616064] ACPI: Using PIC for interrupt routing
[ 0.859648] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.859652] ACPI: EC: driver started in poll mode
[ 0.859822] ACPI: Power Resource [C18D] (on)
[ 0.859973] ACPI: Power Resource [C195] (on)
[ 0.860121] ACPI: Power Resource [C19C] (on)
[ 0.860160] ACPI: Power Resource [C1A6] (on)
[ 0.860335] ACPI: No dock devices found.
[ 0.865578] ACPI: PCI Root Bridge [C046] (0000:00)
[ 0.865628] pci 0000:00:00.0: reg 10 32bit mmio: [0xb0000000-0xbfffffff]
[ 0.865746] pci 0000:00:1d.0: reg 20 io port: [0x48c0-0x48df]
[ 0.865800] pci 0000:00:1d.1: reg 20 io port: [0x48e0-0x48ff]
[ 0.865854] pci 0000:00:1d.2: reg 20 io port: [0x4c00-0x4c1f]
[ 0.865916] pci 0000:00:1d.7: reg 10 32bit mmio: [0xa0000000-0xa00003ff]
[ 0.865974] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.865980] pci 0000:00:1d.7: PME# disabled
[ 0.866070] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.866075] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
[ 0.866100] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.866108] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.866115] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.866123] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.866131] pci 0000:00:1f.1: reg 20 io port: [0x4c40-0x4c4f]
[ 0.866139] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.866191] pci 0000:00:1f.3: reg 20 io port: [0x4c20-0x4c3f]
[ 0.866236] pci 0000:00:1f.5: reg 10 io port: [0x4000-0x40ff]
[ 0.866243] pci 0000:00:1f.5: reg 14 io port: [0x4880-0x48bf]
[ 0.866251] pci 0000:00:1f.5: reg 18 32bit mmio: [0xa0200000-0xa02001ff]
[ 0.866258] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xa0300000-0xa03000ff]
[ 0.866288] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.866293] pci 0000:00:1f.5: PME# disabled
[ 0.866324] pci 0000:00:1f.6: reg 10 io port: [0x4400-0x44ff]
[ 0.866332] pci 0000:00:1f.6: reg 14 io port: [0x4800-0x487f]
[ 0.866369] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.866374] pci 0000:00:1f.6: PME# disabled
[ 0.866413] pci 0000:01:00.0: reg 10 32bit mmio: [0x98000000-0x9fffffff]
[ 0.866420] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.866427] pci 0000:01:00.0: reg 18 32bit mmio: [0x90400000-0x9040ffff]
[ 0.866443] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.866463] pci 0000:01:00.0: supports D1 D2
[ 0.866499] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.866503] pci 0000:00:01.0: bridge 32bit mmio: [0x90400000-0x904fffff]
[ 0.866508] pci 0000:00:01.0: bridge 32bit mmio pref: [0x98000000-0x9fffffff]
[ 0.866543] pci 0000:02:00.0: reg 10 32bit mmio: [0x90200000-0x902007ff]
[ 0.866551] pci 0000:02:00.0: reg 14 io port: [0x2400-0x247f]
[ 0.866591] pci 0000:02:00.0: supports D2
[ 0.866594] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.866599] pci 0000:02:00.0: PME# disabled
[ 0.866633] pci 0000:02:01.0: reg 10 io port: [0x2000-0x20ff]
[ 0.866641] pci 0000:02:01.0: reg 14 32bit mmio: [0x90300000-0x903000ff]
[ 0.866681] pci 0000:02:01.0: supports D1 D2
[ 0.866684] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.866689] pci 0000:02:01.0: PME# disabled
[ 0.866722] pci 0000:02:02.0: reg 10 32bit mmio: [0x90000000-0x90000fff]
[ 0.866767] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.866772] pci 0000:02:02.0: PME# disabled
[ 0.866807] pci 0000:02:04.0: reg 10 32bit mmio: [0x90100000-0x90100fff]
[ 0.866826] pci 0000:02:04.0: supports D1 D2
[ 0.866829] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.866834] pci 0000:02:04.0: PME# disabled
[ 0.866871] pci 0000:00:1e.0: transparent bridge
[ 0.866877] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.866882] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x903fffff]
[ 0.866910] pci_bus 0000:00: on NUMA node 0
[ 0.866916] ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
[ 0.866978] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
[ 0.867003] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT]
[ 0.877411] ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10)
[ 0.877605] ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10)
[ 0.877797] ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10)
[ 0.877989] ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10)
[ 0.878169] ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled.
[ 0.878361] ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11
[ 0.878541] ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled.
[ 0.878733] ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10)
[ 0.878988] SCSI subsystem initialized
[ 0.879045] libata version 3.00 loaded.
[ 0.879129] usbcore: registered new interface driver usbfs
[ 0.879149] usbcore: registered new interface driver hub
[ 0.879178] usbcore: registered new device driver usb
[ 0.879338] ACPI: WMI: Mapper loaded
[ 0.879341] PCI: Using ACPI for IRQ routing
[ 0.879499] Bluetooth: Core ver 2.15
[ 0.879529] NET: Registered protocol family 31
[ 0.879532] Bluetooth: HCI device and connection manager initialized
[ 0.879536] Bluetooth: HCI socket layer initialized
[ 0.879539] NetLabel: Initializing
[ 0.879541] NetLabel: domain hash size = 128
[ 0.879543] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.879562] NetLabel: unlabeled traffic allowed by default
[ 0.881773] pnp: PnP ACPI init
[ 0.881805] ACPI: bus type pnp registered
[ 0.892076] pnp: PnP ACPI: found 15 devices
[ 0.892079] ACPI: ACPI bus type pnp unregistered
[ 0.892084] PnPBIOS: Disabled by ACPI PNP
[ 0.892098] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.892103] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.892107] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.892118] system 00:0c: ioport range 0x140-0x14f has been reserved
[ 0.892123] system 00:0c: ioport range 0x200-0x20f has been reserved
[ 0.892127] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.892131] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.892137] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 0.892141] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 0.892145] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 0.892149] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 0.892153] system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
[ 0.892165] system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
[ 0.926856] AppArmor: AppArmor Filesystem Enabled
[ 0.926890] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.926893] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.926899] pci 0000:00:01.0: MEM window: 0x90400000-0x904fffff
[ 0.926903] pci 0000:00:01.0: PREFETCH window: 0x98000000-0x9fffffff
[ 0.926910] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[ 0.926914] pci 0000:02:04.0: IO window: 0x002800-0x0028ff
[ 0.926919] pci 0000:02:04.0: IO window: 0x002c00-0x002cff
[ 0.926925] pci 0000:02:04.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.926930] pci 0000:02:04.0: MEM window: 0x48000000-0x4bffffff
[ 0.926935] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.926940] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.926946] pci 0000:00:1e.0: MEM window: 0x90000000-0x903fffff
[ 0.926951] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.926968] pci 0000:00:1e.0: setting latency timer to 64
[ 0.927262] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5
[ 0.927265] PCI: setting IRQ 5 as level-triggered
[ 0.927271] pci 0000:02:04.0: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 0.927280] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.927284] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.927287] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.927291] pci_bus 0000:01: resource 1 mem: [0x90400000-0x904fffff]
[ 0.927295] pci_bus 0000:01: resource 2 pref mem [0x98000000-0x9fffffff]
[ 0.927298] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.927302] pci_bus 0000:02: resource 1 mem: [0x90000000-0x903fffff]
[ 0.927305] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[ 0.927309] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.927312] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.927316] pci_bus 0000:03: resource 0 io: [0x2800-0x28ff]
[ 0.927319] pci_bus 0000:03: resource 1 io: [0x2c00-0x2cff]
[ 0.927323] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff]
[ 0.927326] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff]
[ 0.927370] NET: Registered protocol family 2
[ 0.927481] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.927886] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.929341] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.930266] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.930270] TCP reno registered
[ 0.930430] NET: Registered protocol family 1
[ 0.930527] Trying to unpack rootfs image as initramfs...
[ 1.222393] Freeing initrd memory: 8191k freed
[ 1.234243] cpufreq-nforce2: No nForce2 chipset.
[ 1.234288] Scanning for low memory corruption every 60 seconds
[ 1.234458] audit: initializing netlink socket (disabled)
[ 1.234509] type=2000 audit(1258012304.232:1): initialized
[ 1.245590] highmem bounce pool size: 64 pages
[ 1.245598] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.247382] VFS: Disk quotas dquot_6.5.2
[ 1.247451] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.248153] fuse init (API version 7.12)
[ 1.248261] msgmni has been set to 1732
[ 1.248503] alg: No test for stdrng (krng)
[ 1.248518] io scheduler noop registered
[ 1.248520] io scheduler anticipatory registered
[ 1.248523] io scheduler deadline registered
[ 1.248571] io scheduler cfq registered (default)
[ 1.248660] pci 0000:01:00.0: Boot video device
[ 1.248776] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.248805] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.249052] ACPI: AC Adapter [C134] (on-line)
[ 1.249141] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.249147] ACPI: Power Button [PWRF]
[ 1.249214] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.249218] ACPI: Power Button [C1BE]
[ 1.249269] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.249335] ACPI: Lid Switch [C136]
[ 1.249648] Marking TSC unstable due to TSC halts in idle
[ 1.249670] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.249699] processor LNXCPU:00: registered as cooling_device0
[ 1.249704] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.252055] Switched to high resolution mode on CPU 0
[ 1.252286] isapnp: Scanning for PnP cards...
[ 1.606592] isapnp: No Plug & Play device found
[ 1.607892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.608002] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.608140] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 1.608385] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.608972] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
[ 1.608976] PCI: setting IRQ 10 as level-triggered
[ 1.608983] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 1.608991] serial 0000:00:1f.6: PCI INT B disabled
[ 1.610102] brd: module loaded
[ 1.610654] loop: module loaded
[ 1.610736] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.610858] ata_piix 0000:00:1f.1: version 2.13
[ 1.610869] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.610876] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 1.610923] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.611009] scsi0 : ata_piix
[ 1.611101] scsi1 : ata_piix
[ 1.611933] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c40 irq 14
[ 1.611937] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4c48 irq 15
[ 1.612944] Fixed MDIO Bus: probed
[ 1.612986] PPP generic driver version 2.4.2
[ 1.613080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.613373] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5
[ 1.613378] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 5 (level, low) -> IRQ 5
[ 1.613394] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.613398] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.613468] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.617393] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.617400] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.617678] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000
[ 1.632036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.632140] usb usb1: configuration #1 chosen from 1 choice
[ 1.632176] hub 1-0:1.0: USB hub found
[ 1.632187] hub 1-0:1.0: 6 ports detected
[ 1.632265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.632285] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.632584] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[ 1.632589] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 1.632596] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.632600] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.632635] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.632659] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0
[ 1.632752] usb usb2: configuration #1 chosen from 1 choice
[ 1.632794] hub 2-0:1.0: USB hub found
[ 1.632803] hub 2-0:1.0: 2 ports detected
[ 1.633118] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5
[ 1.633122] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 1.633129] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.633133] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.633168] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.633190] uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0
[ 1.633283] usb usb3: configuration #1 chosen from 1 choice
[ 1.633320] hub 3-0:1.0: USB hub found
[ 1.633328] hub 3-0:1.0: 2 ports detected
[ 1.633374] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 1.633381] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.633385] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.633422] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.633443] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00
[ 1.633532] usb usb4: configuration #1 chosen from 1 choice
[ 1.633563] hub 4-0:1.0: USB hub found
[ 1.633570] hub 4-0:1.0: 2 ports detected
[ 1.633690] PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12
[ 1.645488] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.652787] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.652794] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.652797] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.652801] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.652804] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.652868] mice: PS/2 mouse device common for all mice
[ 1.652995] rtc_cmos 00:09: RTC can wake from S4
[ 1.653032] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 1.653049] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.653170] device-mapper: uevent: version 1.0.3
[ 1.653268] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 1.653353] device-mapper: multipath: version 1.1.0 loaded
[ 1.653356] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.653491] EISA: Probing bus 0 at eisa.0
[ 1.653499] Cannot allocate resource for EISA slot 1
[ 1.653502] Cannot allocate resource for EISA slot 2
[ 1.653504] Cannot allocate resource for EISA slot 3
[ 1.653507] Cannot allocate resource for EISA slot 4
[ 1.653525] EISA: Detected 0 cards.
[ 1.653631] cpuidle: using governor ladder
[ 1.653704] cpuidle: using governor menu
[ 1.654262] TCP cubic registered
[ 1.654458] NET: Registered protocol family 10
[ 1.654948] lo: Disabled Privacy Extensions
[ 1.655302] NET: Registered protocol family 17
[ 1.655325] Bluetooth: L2CAP ver 2.13
[ 1.655327] Bluetooth: L2CAP socket layer initialized
[ 1.655330] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.655332] Bluetooth: SCO socket layer initialized
[ 1.655368] Bluetooth: RFCOMM TTY layer initialized
[ 1.655372] Bluetooth: RFCOMM socket layer initialized
[ 1.655374] Bluetooth: RFCOMM ver 1.11
[ 1.655564] Using IPI No-Shortcut mode
[ 1.655638] PM: Resume from disk failed.
[ 1.655658] registered taskstats version 1
[ 1.655778] Magic number: 1:13:875
[ 1.655861] rtc_cmos 00:09: setting system clock to 2009-11-12 07:51:44 UTC (1258012304)
[ 1.655865] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.655867] EDD information not available.
[ 1.675417] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.780735] ata2.00: ATAPI: SONY DVD+RW DW-P50A, 1.8f, max UDMA/33
[ 1.796368] ata2.00: configured for UDMA/33
[ 1.828895] ata1.00: ATA-7: WDC WD1600BEVE-00UYT0, 01.04A01, max UDMA/100
[ 1.828899] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.845094] ata1.00: configured for UDMA/100
[ 1.944041] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 2.076713] usb 1-4: configuration #1 chosen from 1 choice
[ 2.076813] hub 1-4:1.0: USB hub found
[ 2.076908] hub 1-4:1.0: 4 ports detected
[ 2.348120] usb 1-4.1: new low speed USB device using ehci_hcd and address 3
[ 2.445409] usb 1-4.1: configuration #1 chosen from 1 choice
[ 2.864268] ACPI: Battery Slot [C11F] (battery present)
[ 2.864738] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 01.0 PQ: 0 ANSI: 5
[ 2.864869] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.864919] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.864976] sd 0:0:0:0: [sda] Write Protect is off
[ 2.864979] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.865009] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.865155] sda:
[ 2.869995] scsi 1:0:0:0: CD-ROM SONY DVD+RW DW-P50A 1.8f PQ: 0 ANSI: 5
[ 2.884742] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.884746] Uniform CD-ROM driver Revision: 3.20
[ 2.884835] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.884883] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.911669] sda1 sda2 < sda5 sda6 sda7 >
[ 2.962635] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.962653] Freeing unused kernel memory: 540k freed
[ 2.963082] Write protecting the kernel text: 4568k
[ 2.963127] Write protecting the kernel read-only data: 1836k
[ 3.148309] Linux agpgart interface v0.103
[ 3.193369] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 3.211795] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
[ 3.211846] ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no)
[ 3.306540] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 3.324365] [drm] Initialized drm 1.1.0 20060810
[ 3.350684] [drm] radeon default to kernel modesetting DISABLED.
[ 3.350789] pci 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 3.352265] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 3.373207] ohci1394 0000:02:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 3.379144] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.385564] usbcore: registered new interface driver hiddev
[ 3.388751] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input6
[ 3.388855] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-4.1/input0
[ 3.388873] usbcore: registered new interface driver usbhid
[ 3.388876] usbhid: v2.6:USB HID core driver
[ 3.430048] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[90200000-902007ff] Max Packet=[1024] IR/IT contexts=[4/8]
[ 3.435318] 8139cp 0000:02:01.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 3.436479] eth0: RTL-8139C+ at 0xf8302000, 00:0f:b0:04:d5:9c, IRQ 10
[ 3.441797] 8139too Fast Ethernet driver 0.9.28
[ 4.512826] xor: automatically using best checksumming function: pIII_sse
[ 4.532022] pIII_sse : 4135.000 MB/sec
[ 4.532025] xor: using function: pIII_sse (4135.000 MB/sec)
[ 4.536105] device-mapper: dm-raid45: initialized v0.2594b
[ 4.686472] PM: Starting manual resume from disk
[ 4.686478] PM: Resume from partition 8:7
[ 4.686480] PM: Checking hibernation image.
[ 4.686733] PM: Resume from disk failed.
[ 4.708176] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f474a40290d]
[ 4.727898] kjournald starting. Commit interval 5 seconds
[ 4.727909] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.865354] type=1505 audit(1258012308.708:2): operation="profile_load" pid=394 name=/usr/share/gdm/guest-session/Xsession
[ 6.078306] type=1505 audit(1258012308.920:3): operation="profile_load" pid=395 name=/sbin/dhclient3
[ 6.078372] type=1505 audit(1258012308.920:4): operation="profile_load" pid=395 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.078427] type=1505 audit(1258012308.920:5): operation="profile_load" pid=395 name=/usr/lib/connman/scripts/dhclient-script
[ 19.293850] type=1505 audit(1258012322.136:6): operation="profile_load" pid=396 name=/usr/bin/evince
[ 19.295041] type=1505 audit(1258012322.136:7): operation="profile_load" pid=396 name=/usr/bin/evince-previewer
[ 19.295981] type=1505 audit(1258012322.136:8): operation="profile_load" pid=396 name=/usr/bin/evince-thumbnailer
[ 19.466272] type=1505 audit(1258012322.308:9): operation="profile_load" pid=398 name=/usr/bin/freshclam
[ 19.573783] type=1505 audit(1258012322.416:10): operation="profile_load" pid=399 name=/usr/sbin/clamd
[ 19.915235] type=1505 audit(1258012322.756:11): operation="profile_load" pid=400 name=/usr/lib/cups/backend/cups-pdf
[ 19.915438] type=1505 audit(1258012322.756:12): operation="profile_load" pid=400 name=/usr/sbin/cupsd
[ 20.060072] type=1505 audit(1258012322.904:13): operation="profile_load" pid=401 name=/usr/sbin/mysqld
[ 20.171799] type=1505 audit(1258012323.012:14): operation="profile_load" pid=402 name=/usr/sbin/tcpdump
[ 21.521562] Adding 1823336k swap on /dev/sda7. Priority:-1 extents:1 across:1823336k
[ 21.901336] EXT3 FS on sda6, internal journal
[ 24.717359] udev: starting version 147
[ 26.860929] intel_rng: FWH not detected
[ 26.973181] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.262473] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 27.262477] wbsd: Copyright(c) Pierre Ossman
[ 27.263277] wbsd 00:02: activated
[ 27.270085] mmc0: W83L51xD id 7112 at 0x248 irq 6 dma 0 PnP
[ 27.331299] mmc0: problem reading switch capabilities, performance might suffer.
[ 27.333383] mmc0: new SD card at address 1234
[ 27.664346] lp: driver loaded but no devices found
[ 27.813002] isa bounce pool size: 16 pages
[ 27.813076] mmcblk0: mmc0:1234 SD512 485 MiB
[ 27.813140] mmcblk0: p1
[ 28.675659] type=1505 audit(1257976331.516:15): operation="profile_replace" pid=765 name=/usr/share/gdm/guest-session/Xsession
[ 28.716594] irda_init()
[ 28.716698] NET: Registered protocol family 23
[ 28.741609] parport_pc 00:05: reported by Plug and Play ACPI
[ 28.741660] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 28.746081] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.828255] lp0: using parport0 (interrupt-driven).
[ 28.960308] type=1505 audit(1257976331.804:16): operation="profile_replace" pid=778 name=/sbin/dhclient3
[ 28.960469] type=1505 audit(1257976331.804:17): operation="profile_replace" pid=778 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 28.960562] type=1505 audit(1257976331.804:18): operation="profile_replace" pid=778 name=/usr/lib/connman/scripts/dhclient-script
[ 28.991182] ppdev: user-space parallel port driver
[ 29.199628] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device.
[ 29.199633] Setting up Intel 82801 controller and SMSC device
[ 29.199650] Detected Chip id: 0x5a, setting up registers...
[ 29.199765] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[ 29.199781] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e
[ 29.199796] SMsC IrDA Controller found
[ 29.199797] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 29.199850] smsc_ircc_set_sir_speed(), Setting speed to: 9600
[ 29.199862] No transceiver found. Defaulting to Fast pin select
[ 29.200665] IrDA: Registered device irda0
[ 29.323705] lib80211: common routines for IEEE802.11 drivers
[ 29.323710] lib80211_crypt: registered algorithm 'NULL'
[ 29.393285] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860]
[ 29.393305] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 29.393309] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 29.393314] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44
[ 29.628360] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5
[ 29.628366] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 29.628373] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 29.628386] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 29.628391] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 29.628648] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff
[ 29.628653] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 29.973304] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 29.973309] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[ 30.140513] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 30.140519] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 30.140617] ipw2200 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 30.140717] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 30.140772] ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw
[ 30.239624] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[ 30.324128] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 30.720272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 30.721926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 30.722656] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 30.723300] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 30.724158] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 30.980877] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 30.982971] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 30.983016] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 31.916099] intel8x0_measure_ac97_clock: measured 59327 usecs (2858 samples)
[ 31.916104] intel8x0: clocking to 48000
[ 37.256827] eth0: link down
[ 37.257075] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.715499] ttyS2: LSR safety check engaged!
[ 39.768604] ttyS0: LSR safety check engaged!
[ 41.075436] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 41.075457] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 41.075494] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 41.364235] [drm] Setting GART location based on new memory map
[ 41.364248] [drm] Loading R200 Microcode
[ 41.364303] [drm] writeback test succeeded in 2 usecs
[ 43.934565] type=1505 audit(1257976346.776:19): operation="profile_replace" pid=796 name=/usr/bin/evince
[ 43.938047] type=1505 audit(1257976346.780:20): operation="profile_replace" pid=796 name=/usr/bin/evince-previewer
[ 43.939627] type=1505 audit(1257976346.780:21): operation="profile_replace" pid=796 name=/usr/bin/evince-thumbnailer
[ 44.071846] type=1505 audit(1257976346.912:22): operation="profile_replace" pid=1068 name=/usr/bin/freshclam
[ 44.178684] type=1505 audit(1257976347.020:23): operation="profile_replace" pid=1069 name=/usr/sbin/clamd
[ 44.560691] type=1505 audit(1257976347.404:24): operation="profile_replace" pid=1070 name=/usr/lib/cups/backend/cups-pdf
[ 44.560996] type=1505 audit(1257976347.404:25): operation="profile_replace" pid=1070 name=/usr/sbin/cupsd
[ 44.796602] type=1505 audit(1257976347.640:26): operation="profile_replace" pid=1071 name=/usr/sbin/mysqld
[ 44.968762] type=1505 audit(1257976347.812:27): operation="profile_replace" pid=1078 name=/usr/sbin/tcpdump
[ 45.128874] ttyS0: LSR safety check engaged!
[ 45.128933] ttyS0: LSR safety check engaged!
[ 45.129439] ttyS0: LSR safety check engaged!
[ 45.130142] ttyS2: LSR safety check engaged!
[ 45.130187] ttyS2: LSR safety check engaged!
[ 45.130787] ttyS2: LSR safety check engaged!
--
gnome-ppp will not open the serial modem.
https://bugs.launchpad.net/bugs/480901
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs at lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
More information about the universe-bugs
mailing list