[ubuntu/wily-proposed] sane-backends 1.0.24-11ubuntu1 (Accepted)
Iain Lane
iain at orangesquash.org.uk
Tue May 19 13:02:15 UTC 2015
sane-backends (1.0.24-11ubuntu1) wily; urgency=low
* Merge with Debian, remaining changes
- Demote libsane-extras* from Recommends to Suggests, as long as this
package is in universe.
- Demote sane-utils from Recommends to Suggests. We do not want to have
an init script for saned laying around, which is disabled by default
anyway.
- debian/sane-utils.saned.init: Don't call init script on shutdown, it's
unnecessary.
- disable_v4l.patch, fix_avahi_error_paths.patch: See patch headers.
- Update patches which patch Makefile.in to also patch .am.
sane-backends (1.0.24-11) unstable; urgency=medium
* debian/control:
- Add dpkg (>= 1.15.7.2) to Pre-Depends of package libsane-common since
dpkg needs to be installed for the rm_conffile command to work
(Closes: #784763).
* debian/libsane-common.preinst:
- Fix syntax for calling dpkg-maintscript-helper.
sane-backends (1.0.24-10) unstable; urgency=high
* New debian/TROUBLESHOOTING.debian:
- Add part for "usbfs: interface 1 claimed by usblp while
‘scanimage’ sets config #1 (Closes: #726588).
* Add reference to TROUBLESHOOTING.debian in debian/README.debian.
* New debian/patches/001-scanimage_manpage.patch:
- Add remark for parameter to manpage (Closes: #418630).
* New debian/patches/0005-mk_reproducible_results.patch:
- Make builds reproducible.
* debian/control:
- On package libsane-dev change Depends from libgphoto2-2-dev to
libgphoto2-dev (auto-libgphoto2 transition) (Closes: #783822).
- On package libsane remove package hpoj from Suggests.
- Remove useless replaces because latest release in stable is 1.0.22-7:
+ sane-utils: libsane (<< 1.0.11-4)
+ libsane-common: libsane (<< 1.0.22-4~)
+ libsane: libsane-extras (<< 1.0.18.14)
+ libsane-dev: libsane-extras-dev (<< 1.0.18.14)
+ libsane-dbg: libsane-extras-dbg (<< 1.0.18.14)
- Remove "libv4l-dev [linux-any]" from Build-Depends and Depends.
- To enable net SNMP, add libsnmp-dev to Build-Depends.
- To autodetect network scanners in kodakaio, add libcups2-dev
to Build-Depends.
- Remove unnecessary *-dev and pkg-config from Depends of libsane-dev.
* debian/rules:
- Enable pnm backend for testing.
- Remove override_dh_builddeb because xz compression is now standard.
- Add configure parameter --without-vl4 to disable v4l backend:
+ The backend was written for kernel 2.4 and v4l, now
we are at kernel 3.16 and v4l2 (Closes: #446015).
- Remove configure parameter -with-snmp=no to enable net SNMP.
* debian/saned at .service:
- Remove Alias from [Install] section (Closes: #778268).
* sane-utils.[postinst|postrm]:
- Replace fixed path with a POSIX-compliant shell function to check
the existence of a command.
* Add autopkgtests:
- debian/control:
+ Add Testsuite: autopkgtest.
- New debian/tests/control.
- New debian/tests/start-net:
+ Test network interface activation with systemd.
* Add symbols file:
- debian/rules: Rewrite override_dh_makeshlibs.
* Comment out "set -e" at debian/sane-utils.postrm
to fix some minor errors during piuparts.
* debian/saned at .service:
- Change StandardInput=socket to StandardInput=null to enable
working over network (Closes: #782971).
* debian/libsane-common.preinst:
- Remove oldstyle rm_conffile() function.
- Remove obsolete transition from the old-style udev setup.
- Add removal for obsolete /etc/sane.d/v4l.conf via
dpkg-maintscript-helper command rm_conffile.
sane-backends (1.0.24-9) unstable; urgency=medium
* debian/sane-utils.postinst:
- Correct typo and add missing -q option to grep (Closes: #773826).
Thanks to "Nelson A. de Oliveira" <naoliv at debian.org>.
- Add start/stop around the move of the home directory
if scanbd is running during postinst (Closes: #774941).
Thanks to "Olaf Meeuwissen" <olaf.meeuwissen at avasys.jp>.
* debian/rules:
- Add line to extract the version from debian/changelog.
- Add version string to dpkg-gensymbols.
* debian/copyright:
- Add year to 2015 on my debian/* tag.
sane-backends (1.0.24-8) unstable; urgency=medium
* New debian/patches/0100-usb3-corrections.patch:
- Cherry-picked from upstream to address
USB3/xhci problems (Closes: #738592).
* debian/saned at .service:
- Move Alias to section [Install] (Closes: #773371).
sane-backends (1.0.24-7) unstable; urgency=medium
* debian/rules:
- Split dh_installinit in two parts for systemd and SysV-style.
- Install systemd files without dh to prevent
side effects (Closes: #773320).
- Override dh_systemd_enable to not enable saned.socked.
* debian/sane-utils.lintian-overrides:
- Override systemd-no-service-for-init-script.
* debian/sane-utils.postrm:
- Add purge for the manually installed files.
* debian/sane-utils.README.Debian:
- Add instructions for use with systemd.
* debian/sane-utils.saned.default:
- Add note for enabling under systemd.
sane-backends (1.0.24-6) unstable; urgency=medium
* Revert changes from 1.0.24-5.
* Rename sane-utils.saned.service to sane-utils.saned at .service to
install it as template (Closes: #769196).
* For test for newer versions of systemd:
- New debian/patches/0500-systemd_configure.patch
+ Add part into configure.in to find systemd >=209
- debian/control:
+ Add autoconf and libsystemd-dev to Built-Depends.
- debian/rules:
+ Add autoconf before running configure to build the patched
configure script.
- Thanks to Michael Biebl <biebl at debian.org>.
* Change sane-utils.saned at .service and sane-utils.saned.socket
for running as template (Closes: #772955).
* debian/sane-utils.postinst:
- Add part to move the homedir from /home/saned to /var/lib/saned.
(Closes: #665915)
* New debian/sane-utils.lintian-overrides:
- Override postrm-contains-additional-updaterc.d-calls.
sane-backends (1.0.24-5) unstable; urgency=medium
* debian/rules:
- change saned.service to saned at .service to install it as
template (Closes: #769196).
Date: Tue, 19 May 2015 12:13:11 +0100
Changed-By: Iain Lane <iain at orangesquash.org.uk>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/sane-backends/1.0.24-11ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Tue, 19 May 2015 12:13:11 +0100
Source: sane-backends
Binary: sane-utils libsane-common libsane libsane-dev libsane-dbg
Architecture: source
Version: 1.0.24-11ubuntu1
Distribution: wily
Urgency: high
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Iain Lane <iain at orangesquash.org.uk>
Description:
libsane - API library for scanners
libsane-common - API library for scanners -- documentation and support files
libsane-dbg - API development library for scanners [debug symbols]
libsane-dev - API development library for scanners [development files]
sane-utils - API library for scanners -- utilities
Closes: 418630 446015 665915 726588 738592 769196 772955 773320 773371 773826 774941 778268 782971 783822 784763
Changes:
sane-backends (1.0.24-11ubuntu1) wily; urgency=low
.
* Merge with Debian, remaining changes
- Demote libsane-extras* from Recommends to Suggests, as long as this
package is in universe.
- Demote sane-utils from Recommends to Suggests. We do not want to have
an init script for saned laying around, which is disabled by default
anyway.
- debian/sane-utils.saned.init: Don't call init script on shutdown, it's
unnecessary.
- disable_v4l.patch, fix_avahi_error_paths.patch: See patch headers.
- Update patches which patch Makefile.in to also patch .am.
.
sane-backends (1.0.24-11) unstable; urgency=medium
.
* debian/control:
- Add dpkg (>= 1.15.7.2) to Pre-Depends of package libsane-common since
dpkg needs to be installed for the rm_conffile command to work
(Closes: #784763).
* debian/libsane-common.preinst:
- Fix syntax for calling dpkg-maintscript-helper.
.
sane-backends (1.0.24-10) unstable; urgency=high
.
* New debian/TROUBLESHOOTING.debian:
- Add part for "usbfs: interface 1 claimed by usblp while
‘scanimage’ sets config #1 (Closes: #726588).
* Add reference to TROUBLESHOOTING.debian in debian/README.debian.
* New debian/patches/001-scanimage_manpage.patch:
- Add remark for parameter to manpage (Closes: #418630).
* New debian/patches/0005-mk_reproducible_results.patch:
- Make builds reproducible.
* debian/control:
- On package libsane-dev change Depends from libgphoto2-2-dev to
libgphoto2-dev (auto-libgphoto2 transition) (Closes: #783822).
- On package libsane remove package hpoj from Suggests.
- Remove useless replaces because latest release in stable is 1.0.22-7:
+ sane-utils: libsane (<< 1.0.11-4)
+ libsane-common: libsane (<< 1.0.22-4~)
+ libsane: libsane-extras (<< 1.0.18.14)
+ libsane-dev: libsane-extras-dev (<< 1.0.18.14)
+ libsane-dbg: libsane-extras-dbg (<< 1.0.18.14)
- Remove "libv4l-dev [linux-any]" from Build-Depends and Depends.
- To enable net SNMP, add libsnmp-dev to Build-Depends.
- To autodetect network scanners in kodakaio, add libcups2-dev
to Build-Depends.
- Remove unnecessary *-dev and pkg-config from Depends of libsane-dev.
* debian/rules:
- Enable pnm backend for testing.
- Remove override_dh_builddeb because xz compression is now standard.
- Add configure parameter --without-vl4 to disable v4l backend:
+ The backend was written for kernel 2.4 and v4l, now
we are at kernel 3.16 and v4l2 (Closes: #446015).
- Remove configure parameter -with-snmp=no to enable net SNMP.
* debian/saned at .service:
- Remove Alias from [Install] section (Closes: #778268).
* sane-utils.[postinst|postrm]:
- Replace fixed path with a POSIX-compliant shell function to check
the existence of a command.
* Add autopkgtests:
- debian/control:
+ Add Testsuite: autopkgtest.
- New debian/tests/control.
- New debian/tests/start-net:
+ Test network interface activation with systemd.
* Add symbols file:
- debian/rules: Rewrite override_dh_makeshlibs.
* Comment out "set -e" at debian/sane-utils.postrm
to fix some minor errors during piuparts.
* debian/saned at .service:
- Change StandardInput=socket to StandardInput=null to enable
working over network (Closes: #782971).
* debian/libsane-common.preinst:
- Remove oldstyle rm_conffile() function.
- Remove obsolete transition from the old-style udev setup.
- Add removal for obsolete /etc/sane.d/v4l.conf via
dpkg-maintscript-helper command rm_conffile.
.
sane-backends (1.0.24-9) unstable; urgency=medium
.
* debian/sane-utils.postinst:
- Correct typo and add missing -q option to grep (Closes: #773826).
Thanks to "Nelson A. de Oliveira" <naoliv at debian.org>.
- Add start/stop around the move of the home directory
if scanbd is running during postinst (Closes: #774941).
Thanks to "Olaf Meeuwissen" <olaf.meeuwissen at avasys.jp>.
* debian/rules:
- Add line to extract the version from debian/changelog.
- Add version string to dpkg-gensymbols.
* debian/copyright:
- Add year to 2015 on my debian/* tag.
.
sane-backends (1.0.24-8) unstable; urgency=medium
.
* New debian/patches/0100-usb3-corrections.patch:
- Cherry-picked from upstream to address
USB3/xhci problems (Closes: #738592).
* debian/saned at .service:
- Move Alias to section [Install] (Closes: #773371).
.
sane-backends (1.0.24-7) unstable; urgency=medium
.
* debian/rules:
- Split dh_installinit in two parts for systemd and SysV-style.
- Install systemd files without dh to prevent
side effects (Closes: #773320).
- Override dh_systemd_enable to not enable saned.socked.
* debian/sane-utils.lintian-overrides:
- Override systemd-no-service-for-init-script.
* debian/sane-utils.postrm:
- Add purge for the manually installed files.
* debian/sane-utils.README.Debian:
- Add instructions for use with systemd.
* debian/sane-utils.saned.default:
- Add note for enabling under systemd.
.
sane-backends (1.0.24-6) unstable; urgency=medium
.
* Revert changes from 1.0.24-5.
* Rename sane-utils.saned.service to sane-utils.saned at .service to
install it as template (Closes: #769196).
* For test for newer versions of systemd:
- New debian/patches/0500-systemd_configure.patch
+ Add part into configure.in to find systemd >=209
- debian/control:
+ Add autoconf and libsystemd-dev to Built-Depends.
- debian/rules:
+ Add autoconf before running configure to build the patched
configure script.
- Thanks to Michael Biebl <biebl at debian.org>.
* Change sane-utils.saned at .service and sane-utils.saned.socket
for running as template (Closes: #772955).
* debian/sane-utils.postinst:
- Add part to move the homedir from /home/saned to /var/lib/saned.
(Closes: #665915)
* New debian/sane-utils.lintian-overrides:
- Override postrm-contains-additional-updaterc.d-calls.
.
sane-backends (1.0.24-5) unstable; urgency=medium
.
* debian/rules:
- change saned.service to saned at .service to install it as
template (Closes: #769196).
Checksums-Sha1:
f00c4b4999249241e7f1c627d854e0f7802882a9 2591 sane-backends_1.0.24-11ubuntu1.dsc
c4f040384f0c90c887d10f0d96e9d4efcbab491c 109612 sane-backends_1.0.24-11ubuntu1.debian.tar.xz
Checksums-Sha256:
954ddbad1390be695dc74c2fd2170c70e8ebba236cfd7f600bc9c21816cd2763 2591 sane-backends_1.0.24-11ubuntu1.dsc
eda9e0484dae94e9a700c8612e0c5fd36af8772d016208221bbbed64ef030ba1 109612 sane-backends_1.0.24-11ubuntu1.debian.tar.xz
Files:
d6384938f20e290b9441c9a08cdc9ebb 2591 graphics optional sane-backends_1.0.24-11ubuntu1.dsc
f4b7bf7322168a7c44ec00497d1253eb 109612 graphics optional sane-backends_1.0.24-11ubuntu1.debian.tar.xz
Original-Maintainer: Jörg Frings-Fürst <debian at jff-webhosting.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SEN2
-----END PGP SIGNATURE-----
More information about the Wily-changes
mailing list