[ubuntu/xenial-proposed] pbuilder 0.221ubuntu1 (Accepted)

[Gianfranco Costamagna]

pbuilder (0.221ubuntu1) xenial; urgency=medium

  * Merge from debian unstable, remaining changes:
    - pbuilderrc, debian/pbuilder.config, debian/po/*: Set default archive
      mirror to "archive.ubuntu.com/ubuntu".
    - Remove --keyring override from default pbuilderrc
    - Set default distribution to "xenial"

pbuilder (0.221) unstable; urgency=medium

  [ Reiner Herrmann ]
  * doc/Makefile: make the build reproducible by using a fixed temp dir to
    build the pdf.  Closes: #804729

  [ Luca Falavigna ]
  * add binNMU support.  Closes: #683848

  [ Andreas Beckmann ]
  * add "binary-only=yes" mark to the binNMU changelog.
  * only set Changed-By to --binnmu-maintainer in .changes do not override
    Maintainer.

  [ Mattia Rizzolo ]
  * debian/control:
    + Add dependency on dpkg-dev >= 1.7.0 due to `dpkg-parsechangelog -S`
  * {create,update}: consider APTGETOPT also when running apt-get update.
    Closes: #608636
  * make the output level configurable through LOGLEVEL (--loglevel)
    valid values are D/I/W/E.  Closes: #490184
  * pbuilder:
    + add an (undocumented) --help operation.  Exit 0 if the help was requested.
    + clean: use `rm -f` when removing APTCACHE/*, so we don't fail when there
      is nothing in it.  Closes: #607607
    + update: correctly detect if debdelta is available.  Closes: #805392
    + build: umount as the very last option, due keeping the bindmounts while
      executing the hooks.  Closes: #805552
  * pdebuild:
    + make debsign work if only a source build was perfomed and only
      _source.changes is available.  Closes: #804905
      Thanks to Marcin Kulisz <marcin at bashton.com> for the original patch.
  * modules:
    + add 3 log.{i,w,e}() functions to be used instead of log().
      - also use them instead of plain log() everywhere in the code.
    + mainly style improvments to binNMU().
    + short the --help output and point to the manual pages instead.
    + copy /etc/resolv.conf from the host only when USENETWORK=yes.
      Closes: #753944
  * checkparams:
    + override "experimental" DISTRIBUTION only in the create and update target.
  * docs:
    + add an empty POT file in the documentation directory, to ease the work of
      translators.  Closes: #629947
  * t:
    + testlib: add a expect_stderr(), to explicitly test stderr.
    + pbuilder-modules: also test the expected stderr from log().
  * debian/tests/build-procenv: use archive.ubuntu.com for amd64/i386 and
    ports.ubuntu.com for everything else to fix autopkgtests on ubuntu.

Date: Tue, 24 Nov 2015 17:50:54 +0100
Changed-By: Gianfranco Costamagna <locutusofborg at debian.org>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Signed-By: Martin Pitt <martin.pitt at ubuntu.com>
https://launchpad.net/ubuntu/+source/pbuilder/0.221ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Tue, 24 Nov 2015 17:50:54 +0100
Source: pbuilder
Binary: pbuilder pbuilder-uml
Architecture: source
Version: 0.221ubuntu1
Distribution: xenial
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Gianfranco Costamagna <locutusofborg at debian.org>
Description:
 pbuilder   - personal package builder for Debian packages
 pbuilder-uml - user-mode-linux version of pbuilder
Closes: 490184 607607 608636 629947 683848 753944 804729 804905 805392 805552
Changes:
 pbuilder (0.221ubuntu1) xenial; urgency=medium
 .
   * Merge from debian unstable, remaining changes:
     - pbuilderrc, debian/pbuilder.config, debian/po/*: Set default archive
       mirror to "archive.ubuntu.com/ubuntu".
     - Remove --keyring override from default pbuilderrc
     - Set default distribution to "xenial"
 .
 pbuilder (0.221) unstable; urgency=medium
 .
   [ Reiner Herrmann ]
   * doc/Makefile: make the build reproducible by using a fixed temp dir to
     build the pdf.  Closes: #804729
 .
   [ Luca Falavigna ]
   * add binNMU support.  Closes: #683848
 .
   [ Andreas Beckmann ]
   * add "binary-only=yes" mark to the binNMU changelog.
   * only set Changed-By to --binnmu-maintainer in .changes do not override
     Maintainer.
 .
   [ Mattia Rizzolo ]
   * debian/control:
     + Add dependency on dpkg-dev >= 1.7.0 due to `dpkg-parsechangelog -S`
   * {create,update}: consider APTGETOPT also when running apt-get update.
     Closes: #608636
   * make the output level configurable through LOGLEVEL (--loglevel)
     valid values are D/I/W/E.  Closes: #490184
   * pbuilder:
     + add an (undocumented) --help operation.  Exit 0 if the help was requested.
     + clean: use `rm -f` when removing APTCACHE/*, so we don't fail when there
       is nothing in it.  Closes: #607607
     + update: correctly detect if debdelta is available.  Closes: #805392
     + build: umount as the very last option, due keeping the bindmounts while
       executing the hooks.  Closes: #805552
   * pdebuild:
     + make debsign work if only a source build was perfomed and only
       _source.changes is available.  Closes: #804905
       Thanks to Marcin Kulisz <marcin at bashton.com> for the original patch.
   * modules:
     + add 3 log.{i,w,e}() functions to be used instead of log().
       - also use them instead of plain log() everywhere in the code.
     + mainly style improvments to binNMU().
     + short the --help output and point to the manual pages instead.
     + copy /etc/resolv.conf from the host only when USENETWORK=yes.
       Closes: #753944
   * checkparams:
     + override "experimental" DISTRIBUTION only in the create and update target.
   * docs:
     + add an empty POT file in the documentation directory, to ease the work of
       translators.  Closes: #629947
   * t:
     + testlib: add a expect_stderr(), to explicitly test stderr.
     + pbuilder-modules: also test the expected stderr from log().
   * debian/tests/build-procenv: use archive.ubuntu.com for amd64/i386 and
     ports.ubuntu.com for everything else to fix autopkgtests on ubuntu.
Checksums-Sha1:
 60a5f29d5f4ba390e0bad053bc7e19ad3773b71c 2036 pbuilder_0.221ubuntu1.dsc
 50a26954d1d891d09d33a822c9bf72bb33aa21b5 311864 pbuilder_0.221ubuntu1.tar.xz
Checksums-Sha256:
 c7413fb96a1dab9ec32c37c585623dcb51d61bf45aed3c5374ace9504a985aac 2036 pbuilder_0.221ubuntu1.dsc
 06f77082a742153c7afa2c9743c9c73a266287cdabb1048c19562f6a9dbd7185 311864 pbuilder_0.221ubuntu1.tar.xz
Files:
 f0d0b5ece21b09054eb644d160e013ff 2036 devel extra pbuilder_0.221ubuntu1.dsc
 5d40fa6d8a13fcfb3eb58be000c8e182 311864 devel extra pbuilder_0.221ubuntu1.tar.xz
Original-Maintainer: Debian pbuilder maintenance team <pbuilder-maint at lists.alioth.debian.org>

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=ac3Y
-----END PGP SIGNATURE-----