[ubuntu/xenial-proposed] linux-raspi2 4.4.0-1002.3 (Accepted)
Paolo Pisati
paolo.pisati at canonical.com
Thu Mar 3 01:18:41 UTC 2016
linux-raspi2 (4.4.0-1002.3) xenial; urgency=low
[ Tim Gardner ]
* Release Tracking Bug
- LP: #1552488
[ Paolo Pisati ]
* Rebase to Ubuntu-4.4.0-9.24
* Update rpi-4.4.y BSP @ 36babd8
* Miscellaneous upstream changes
- BCM270X_DT: Disable DMA for bcm2835-sdhost on Pi2
- FIXUP i2c_bcm2708: Don't change module baudrate parameter
- Allow up to 24dB digital gain to be applied when using IQAudIO DAC+
- Limit PCM512x "Digital" gain to 0dB by default with HiFiBerry DAC+
- BCM270X_DT: Adjust overlay README formatting
- FIXUP: Overlay README - Restore spaces deleted in error
- pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing
- Revert "BCM270X_DT: Disable DMA for bcm2835-sdhost on Pi2"
- bcm2835-sdhost: Major revision
- BCM270X_DT: Add dtparams for the SD interface
- dcw_otg: trim xfer length when buffer larger than allocated size is received
- bcm2835-sdhost: Restore ATOMIC flag to PIO sg mapping
- Revert "Add blk_pos parameter to mmc multi_io_quirk callback"
- Updated smsc95xx driver to check for a valid MAC address in eeprom before
using smsc95xx.macaddr parameter passed on command line.
- dcw_otg: Make trimming messages less noisy
- BCM270X_DT: at86rf233 overlay - drop to 3MHz
- bcm2835-sdhost: Downgrade log message status
- config: Enable HCI over UARTs
- hci_h5: Don't send conf_req when ACTIVE
- amba_pl011: Don't use DT aliases for numbering
- clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.
- clk: bcm2835: Add a driver for the auxiliary peripheral clock gates.
- Aux SPI 1&2 implementation
- ASoC: bcm: add missing .owner fields in sound card drivers
- smsx95xx: Add option to disable the crimes against truesize fix
- bcm2835-virtgpio: Virtual GPIO driver
- BCM270X_DT: Add Pi3 support
- FIXUP: BCM270X_DT: Update to latest Pi3 DTS
Date: Wed, 02 Mar 2016 13:50:21 +0100
Changed-By: Paolo Pisati <paolo.pisati at canonical.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Signed-By: Tim Gardner <tim.gardner at canonical.com>
https://launchpad.net/ubuntu/+source/linux-raspi2/4.4.0-1002.3
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Wed, 02 Mar 2016 13:50:21 +0100
Source: linux-raspi2
Binary: linux-raspi2-headers-4.4.0-1002 linux-raspi2-tools-4.4.0-1002 linux-image-4.4.0-1002-raspi2 linux-headers-4.4.0-1002-raspi2 linux-image-4.4.0-1002-raspi2-dbgsym linux-tools-4.4.0-1002-raspi2
Architecture: source
Version: 4.4.0-1002.3
Distribution: xenial
Urgency: low
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Paolo Pisati <paolo.pisati at canonical.com>
Description:
linux-headers-4.4.0-1002-raspi2 - Linux kernel headers for version 4.4.0 on SMP
linux-image-4.4.0-1002-raspi2 - Linux kernel image for version 4.4.0 on SMP
linux-image-4.4.0-1002-raspi2-dbgsym - Linux kernel debug image for version 4.4.0 on SMP
linux-raspi2-headers-4.4.0-1002 - Header files related to Linux kernel version 4.4.0
linux-raspi2-tools-4.4.0-1002 - Linux kernel version specific tools for version 4.4.0-1002
linux-tools-4.4.0-1002-raspi2 - Linux kernel version specific tools for version 4.4.0-1002
Launchpad-Bugs-Fixed: 1552488
Changes:
linux-raspi2 (4.4.0-1002.3) xenial; urgency=low
.
[ Tim Gardner ]
.
* Release Tracking Bug
- LP: #1552488
.
[ Paolo Pisati ]
.
* Rebase to Ubuntu-4.4.0-9.24
* Update rpi-4.4.y BSP @ 36babd8
.
* Miscellaneous upstream changes
- BCM270X_DT: Disable DMA for bcm2835-sdhost on Pi2
- FIXUP i2c_bcm2708: Don't change module baudrate parameter
- Allow up to 24dB digital gain to be applied when using IQAudIO DAC+
- Limit PCM512x "Digital" gain to 0dB by default with HiFiBerry DAC+
- BCM270X_DT: Adjust overlay README formatting
- FIXUP: Overlay README - Restore spaces deleted in error
- pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing
- Revert "BCM270X_DT: Disable DMA for bcm2835-sdhost on Pi2"
- bcm2835-sdhost: Major revision
- BCM270X_DT: Add dtparams for the SD interface
- dcw_otg: trim xfer length when buffer larger than allocated size is received
- bcm2835-sdhost: Restore ATOMIC flag to PIO sg mapping
- Revert "Add blk_pos parameter to mmc multi_io_quirk callback"
- Updated smsc95xx driver to check for a valid MAC address in eeprom before
using smsc95xx.macaddr parameter passed on command line.
- dcw_otg: Make trimming messages less noisy
- BCM270X_DT: at86rf233 overlay - drop to 3MHz
- bcm2835-sdhost: Downgrade log message status
- config: Enable HCI over UARTs
- hci_h5: Don't send conf_req when ACTIVE
- amba_pl011: Don't use DT aliases for numbering
- clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.
- clk: bcm2835: Add a driver for the auxiliary peripheral clock gates.
- Aux SPI 1&2 implementation
- ASoC: bcm: add missing .owner fields in sound card drivers
- smsx95xx: Add option to disable the crimes against truesize fix
- bcm2835-virtgpio: Virtual GPIO driver
- BCM270X_DT: Add Pi3 support
- FIXUP: BCM270X_DT: Update to latest Pi3 DTS
Checksums-Sha1:
9336016e1fe4ea13f68f382b5d1f349d3f788fd0 3266 linux-raspi2_4.4.0-1002.3.dsc
180ab617036593212274177eff3a67f437c1b5ea 132860730 linux-raspi2_4.4.0.orig.tar.gz
064f07fd7732623dd79abc9c2bf7bf27b043f862 11877933 linux-raspi2_4.4.0-1002.3.diff.gz
Checksums-Sha256:
716810e92c7479fa505631290a03a6881fbed8547b3490bf7fe364024247a974 3266 linux-raspi2_4.4.0-1002.3.dsc
730e75919b5d30a9bc934ccb300eaedfdf44994ca9ee1d07a46901c46c221357 132860730 linux-raspi2_4.4.0.orig.tar.gz
277b3b11d109a08d902c6a75e12d1ab8409e282f5b46e57cf6761b07fc3204da 11877933 linux-raspi2_4.4.0-1002.3.diff.gz
Files:
87a6fd729cb5af40bb05aa21f1baf121 3266 devel optional linux-raspi2_4.4.0-1002.3.dsc
2070b49688e8d7ee7ff4c33590afc698 132860730 devel optional linux-raspi2_4.4.0.orig.tar.gz
316d8cb4229db0ccae9ad84060110c39 11877933 devel optional linux-raspi2_4.4.0-1002.3.diff.gz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Mq5U
-----END PGP SIGNATURE-----
More information about the Xenial-changes
mailing list