[ubuntu/xenial-proposed] nplan 0.32~16.04.1 (Accepted)
Mathieu Trudel-Lapierre
cyphermox at ubuntu.com
Thu Nov 23 17:03:38 UTC 2017
nplan (0.32~16.04.1) xenial; urgency=medium
* Backport netplan 0.32 to 16.04. (LP: #1713142)
* debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
feature backported in that revision.
* tests/integration.py: Skip tests that are still not yet supported in xenial
nplan (0.32) bionic; urgency=medium
* src/nm.c: better handle the UUID generation; the order of iterating
through interaces may affect things here. Also make sure the tests catch
a null UUID.
nplan (0.31) bionic; urgency=medium
[ Mathieu Trudel-Lapierre ]
* src/nm.c: generate a UUID for a connection only as needed; when we're
dealing with NM VLANs. (LP: #1712921)
* debian/tests/autostart: Make the autostart test more verbose and avoid
failing right from the start when systemd-networkd is disabled.
(LP: #1699371)
* tests/integration.py: bump the NetworkManager timeout for settling to
120 seconds, autopkgtest infrastructure tends to be a little slow for the
network device configuration to be applied and noticed by NM.
(LP: #1699371)
[ Dimitri John Ledkov ]
* Reload udevd to invalidate configuration cache of .rules/.link files
as generate step may have changed them. LP: #1669564
[ Dan Streetman ]
* Add another interface driver exception to netplan replug to prevent unbind
of the Xen VIF interfaces. (LP: #1729573)
nplan (0.30) artful; urgency=medium
* Add an "optional" syntax node for now to all devices. This is unimplemented
for now, but intended to allow users to mark some devices as optional: to
make sure they do not delay boot when configured. (LP: #1664844)
nplan (0.29) artful; urgency=medium
* Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.
nplan (0.28) artful; urgency=medium
* Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
* Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)
nplan (0.27) artful; urgency=medium
[ Mathieu Trudel-Lapierre ]
* Fix crash in systemd generator if called by an user on the command-line
* coverage: fix exclusions to properly not cover our "never reached defaults"
[ Dimitri John Ledkov ]
* tests/integration.py: In teardown, stop systemd-networkd.socket.
* src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
* tests/integration.py: fix resolved detection.
nplan (0.26) artful; urgency=medium
* Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
* Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
rebind. (LP: #1712224)
* Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
being around and enabled when we restart the service; but we don't need
to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
networkd autostarts or not, but we need to make sure that our generator
will run at boot, so instead check the state, but only assert it once
we've added a config file and before checking the state of our dummy
device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
as reliable as possible; by setting saner defaults.
nplan (0.25) artful; urgency=medium
* tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
* tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
* src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
* src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
* src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
configured; this follows the same logic as setting IPv6AcceptRA=no in
networkd, with the exception that NM does not currently disable RAs. When
it does, an unconfigured device for IPv6 will truly be left with no config.
nplan (0.24) artful; urgency=medium
* debian/control: set Priority to important to make sure we can get into
minimal.
Date: Thu, 16 Nov 2017 10:13:28 -0500
Changed-By: Mathieu Trudel-Lapierre <cyphermox at ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/nplan/0.32~16.04.1
-------------- next part --------------
Format: 1.8
Date: Thu, 16 Nov 2017 10:13:28 -0500
Source: nplan
Binary: nplan
Architecture: source
Version: 0.32~16.04.1
Distribution: xenial
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Mathieu Trudel-Lapierre <cyphermox at ubuntu.com>
Description:
nplan - YAML network configuration abstraction for various backends
Launchpad-Bugs-Fixed: 1655440 1664844 1669564 1699371 1709135 1712224 1712921 1713142 1717404 1717471 1729573
Changes:
nplan (0.32~16.04.1) xenial; urgency=medium
.
* Backport netplan 0.32 to 16.04. (LP: #1713142)
* debian/control: Depend on systemd (>= 229-4ubuntu20) for the PrimarySlave
feature backported in that revision.
* tests/integration.py: Skip tests that are still not yet supported in xenial
.
nplan (0.32) bionic; urgency=medium
.
* src/nm.c: better handle the UUID generation; the order of iterating
through interaces may affect things here. Also make sure the tests catch
a null UUID.
.
nplan (0.31) bionic; urgency=medium
.
[ Mathieu Trudel-Lapierre ]
* src/nm.c: generate a UUID for a connection only as needed; when we're
dealing with NM VLANs. (LP: #1712921)
* debian/tests/autostart: Make the autostart test more verbose and avoid
failing right from the start when systemd-networkd is disabled.
(LP: #1699371)
* tests/integration.py: bump the NetworkManager timeout for settling to
120 seconds, autopkgtest infrastructure tends to be a little slow for the
network device configuration to be applied and noticed by NM.
(LP: #1699371)
.
[ Dimitri John Ledkov ]
* Reload udevd to invalidate configuration cache of .rules/.link files
as generate step may have changed them. LP: #1669564
.
[ Dan Streetman ]
* Add another interface driver exception to netplan replug to prevent unbind
of the Xen VIF interfaces. (LP: #1729573)
.
nplan (0.30) artful; urgency=medium
.
* Add an "optional" syntax node for now to all devices. This is unimplemented
for now, but intended to allow users to mark some devices as optional: to
make sure they do not delay boot when configured. (LP: #1664844)
.
nplan (0.29) artful; urgency=medium
.
* Fix autopkgtests in a world where /run/NetworkManager/conf.d already
exists. nplan is enabled by default, so it might well have the directory
already created on the filesystem.
.
nplan (0.28) artful; urgency=medium
.
* Revert 56cd3eec which disabled IPv6 Router Advertisements by default. It
broke default network config in LXD and was contrary to the defaults used
by the kernel. Reopens LP: 1655440. (LP: #1717404)
* Add "accept-ra:" key for all device types; this will default to OFF but
allow users to disable processing Router Advertisements when required by
their network setup. (LP: #1655440)
.
nplan (0.27) artful; urgency=medium
.
[ Mathieu Trudel-Lapierre ]
* Fix crash in systemd generator if called by an user on the command-line
* coverage: fix exclusions to properly not cover our "never reached defaults"
.
[ Dimitri John Ledkov ]
* tests/integration.py: In teardown, stop systemd-networkd.socket.
* src/networkd.c: Set UseMTU=true by default, whenever DHCP is in use.
(LP: #1717471)
* tests/integration.py: fix resolved detection.
.
nplan (0.26) artful; urgency=medium
.
* Bonding:
- Add support for specifying a primary slave. (LP: #1709135)
* Rebind:
- Fix brcmfmac harder. Treat any 'brcmfmac' driver as not supporting
rebind. (LP: #1712224)
* Autopkgtests:
- Add allow-stderr. Systemd now bleats about a the networkd socket still
being around and enabled when we restart the service; but we don't need
to care since we're /restarting/ the service to load the new config.
- Fix the autostart package to be more sensible: we don't really care if
networkd autostarts or not, but we need to make sure that our generator
will run at boot, so instead check the state, but only assert it once
we've added a config file and before checking the state of our dummy
device.
- Do a bit more to make sure "mix" tests which stack virtual devices are
as reliable as possible; by setting saner defaults.
.
nplan (0.25) artful; urgency=medium
.
* tests/generate.py: add a test to validate that correct blacklist entries
are added when creating virtual devices.
* tests/integration.py: clean up after br0 in networkd's test_bridge_mac; as
the remaining interface and udev configuration can confuse NetworkManager
now that it seems to manage random devices it did not create again.
(LP: #1699371)
* src/nm.c: set the MTU even though we also specify it in systemd-networkd
for consumption by udev. NetworkManager will try to set it and might
otherwise default to the wrong value.
* src/networkd.c: Set IPv6AcceptRA=no anytime we don't do DHCPv6 (or by the
same config, SLAAC), and don't have static addresses set. This should fix
the cases where unconfigured devices still get an IPv6 address.
(LP: #1655440)
* src/nm.c: Explicitly set IPv6 method=ignore when IPv6 is otherwise not
configured; this follows the same logic as setting IPv6AcceptRA=no in
networkd, with the exception that NM does not currently disable RAs. When
it does, an unconfigured device for IPv6 will truly be left with no config.
.
nplan (0.24) artful; urgency=medium
.
* debian/control: set Priority to important to make sure we can get into
minimal.
Checksums-Sha1:
dc8c70ca6f0b9809c9ef37c305a179b3f72aea83 1755 nplan_0.32~16.04.1.dsc
dc2b333509079058a9309129caf4e685d5a94c9b 73176 nplan_0.32~16.04.1.tar.gz
546bad523c1154c258cfdf2c30ae25850ca2fa3c 7978 nplan_0.32~16.04.1_source.buildinfo
Checksums-Sha256:
afb9d07a1ca2a627c03c67ed940e4ba8f567bea4c4d9ecc9264ca029ff697070 1755 nplan_0.32~16.04.1.dsc
32f8fad88587eee55f0e1bf3985ccd6b1946f39f8a244227aab17f1f25b624b6 73176 nplan_0.32~16.04.1.tar.gz
7c1378372a2371fd2c75c59080c25b8d0f57e459128300362462f7a9618cad70 7978 nplan_0.32~16.04.1_source.buildinfo
Files:
8ab42ce8a4f178e77966bce2da246cf8 1755 net important nplan_0.32~16.04.1.dsc
eb5102639682cf2e4b219353cd76600b 73176 net important nplan_0.32~16.04.1.tar.gz
57ae08fb96041632992d3ca0f2318eda 7978 net important nplan_0.32~16.04.1_source.buildinfo
More information about the Xenial-changes
mailing list