Ubuntu Core 16 beta images available

[Federico Gimenez]

Hey Omer

On Sat, Sep 10, 2016 at 12:29 PM, Omer Akram <omer.akram at canonical.com>
wrote:

>
> My general workflow is: I flash the ubuntu-core on my sdcard and boot the
> Pi without any internet (this creates some initial directories like
> /etc/network). Then I add a network interface for my wifi dongle by
> mounting the sdcard on my laptop and again boot the Pi. This used to get me
> access to the Pi. With latest image my device does get online with my home
> router(dhcp successful) but I cannot ssh as I presume there is no default
> user.
>
>
For the serial console ogra mentioned you can use a usb to ttl serial cable
to connect to the pi2 [1]. Having the pins connected this way [2] you can
interact with it through this command once the usb is connected to the
laptop:

    $ sudo screen /dev/ttyUSB0 115200

Then you can configure the network on first boot from console-conf. Please
let me know if you need any further info. Thanks! :)

[1] https://www.adafruit.com/product/954
[2]
https://www.modmypi.com/image/cache/data/rpi-products/gpio/debug/USB-to-TTL-Serial-Cable-Debug-Console-Cable-for-Raspberry-Pi-1-800x609.jpg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.snapcraft.io/archives/devices/attachments/20160912/8184d4dd/attachment.html>