Ubuntu Core 16 beta images available

[Omer Akram]

Hello Federico,

I was looking into that yesterday, just ordered one of those.

Thanks!

On Mon, Sep 12, 2016 at 1:16 PM, Federico Gimenez <
federico.gimenez.nieto at canonical.com> wrote:

> Hey Omer
>
> On Sat, Sep 10, 2016 at 12:29 PM, Omer Akram <omer.akram at canonical.com>
> wrote:
>
>>
>> My general workflow is: I flash the ubuntu-core on my sdcard and boot the
>> Pi without any internet (this creates some initial directories like
>> /etc/network). Then I add a network interface for my wifi dongle by
>> mounting the sdcard on my laptop and again boot the Pi. This used to get me
>> access to the Pi. With latest image my device does get online with my home
>> router(dhcp successful) but I cannot ssh as I presume there is no default
>> user.
>>
>>
> For the serial console ogra mentioned you can use a usb to ttl serial
> cable to connect to the pi2 [1]. Having the pins connected this way [2]
> you can interact with it through this command once the usb is connected to
> the laptop:
>
>     $ sudo screen /dev/ttyUSB0 115200
>
> Then you can configure the network on first boot from console-conf. Please
> let me know if you need any further info. Thanks! :)
>
> [1] https://www.adafruit.com/product/954
> [2] https://www.modmypi.com/image/cache/data/rpi-products/
> gpio/debug/USB-to-TTL-Serial-Cable-Debug-Console-Cable-for-
> Raspberry-Pi-1-800x609.jpg
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.snapcraft.io/archives/devices/attachments/20160912/1e3d731c/attachment-0001.html>