[Bug 2131958] Re: Installer doesn't seem to recogneize hybrid HDD + SSD harddrive - installs on itself
Erwin Goodman
2131958 at bugs.launchpad.net
Fri Nov 28 11:01:51 UTC 2025
** Description changed:
See this Reddit thread for reference:
https://www.reddit.com/r/linuxmint/comments/1oyhl0o/critical_install_error_what_do/
...and this thread on the Linux Mint forum:
https://forums.linuxmint.com/viewtopic.php?p=2708861#p2708861
linux mint GitHub bug report I created before this: https://github.com/inuxmint/cinnamon/issues/13203
(I thought the GitHub for Linux Mint was the right place to post it. Apparently it wasn't as the Ubiquity installer has this separate hub)
The most noteworthy pieces of information have been added here:
https://forums.linuxmint.com/viewtopic.php?t=457750
I was told to report this here.
- I tried to install Linux Mint on an old DELL Inspiron 14 7437 laptop.
+ I tried to install Linux Mint on an old laptop.
- This pc was released when SSDs started to become mainstream. It contains
- a very weird hybrid hard drive that has a 500 GB HDD and a 32 GB SSD
- section.
+ This pc was released when SSDs started to become mainstream. It was sold
+ with a "hybrid" hard drive that has a 500GB HDD and a 32GB SSD section.
- Hard Drive 0: Info => https://www.disctech.com/Seagate-ST500LT032-500GB-SATA-Hard-Drive
- Hard Drive 1: Info => https://www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
- System: Info => https://geizhals.de/dell-inspiron-14-7437-52011807-a1077854.html
+ Model: # Dell Inspiron 14 7437
+ BIOS/UEFI: Dell A12
+ CPU: # Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
+ RAM: 2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
+ GPU: # Intel HD Graphics 4400
+ Display: 14" 1920×1080
+ Hard Drive 0: # Info => https://www.disctech.com/Seagate-ST500LT032-500GB-SATA-
+ Hard Drive 1: Info => https://www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
+ X.Org: # 21.1.11
The laptop had Windows 10 installed before I tried to put the new
install on it. I used the newest 1.1.07 version of Ventoy to put the
newest Mint .iso on an 16 GB Kingston Data Traveler 2.0 USB stick as
boot medium.
The install program seemingly didn't correctly detect any part of the
harddrive(s).
When I ran the install, it had somehow seemingly erased both sides of
the internal harddrive and therefore automatically selected the USB
stick as the harddrive instead, but didn't tell me that in the install
program.
The install program should probably tell people what the boot install
software wants to install on on the default option (= no custom
partition selected).
It then proceeded to try to install Linux Mint on the very same stick
the install software was stored upon. Or at least what I think what
happened. At least it gave me the error message you can see as the first
picture in the Reddit thread.
After that, nothing worked. The pc wouldn't boot into the Linux Mint OS
and I couldn't boot from the stick again. The stick was seemingly broken
or wiped as it wouldn't show as a hard drive anymore on my parallely
used Win11 test/control laptop.
After downloading another .iso of linux mint and Ventoy on my
test/control laptop, I found out that the stick was indeed not broken at
all, but that the ISO was just erased. After reconfiguring the USB stick
with Ventoy and the new .iso, I was able to boot linux mint from the
stick on the old laptop again.
This time I selected the custom ROM partition option to see what the
program was suggesting to install upon. This was when I realized that
the installation program tries to install linux mint on the very same
stick the iso is stored upon, because it can't really detect the
harddrive.
My best guess is that it's because the harddrive is such a weird piece
of hardware, but I really don't know.
I only have access to this laptop on the weekends so I can't post the
syslog and partman files here.
** Description changed:
See this Reddit thread for reference:
https://www.reddit.com/r/linuxmint/comments/1oyhl0o/critical_install_error_what_do/
...and this thread on the Linux Mint forum:
https://forums.linuxmint.com/viewtopic.php?p=2708861#p2708861
linux mint GitHub bug report I created before this: https://github.com/inuxmint/cinnamon/issues/13203
(I thought the GitHub for Linux Mint was the right place to post it. Apparently it wasn't as the Ubiquity installer has this separate hub)
The most noteworthy pieces of information have been added here:
https://forums.linuxmint.com/viewtopic.php?t=457750
I was told to report this here.
I tried to install Linux Mint on an old laptop.
This pc was released when SSDs started to become mainstream. It was sold
with a "hybrid" hard drive that has a 500GB HDD and a 32GB SSD section.
- Model: # Dell Inspiron 14 7437
- BIOS/UEFI: Dell A12
- CPU: # Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
- RAM: 2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
- GPU: # Intel HD Graphics 4400
- Display: 14" 1920×1080
- Hard Drive 0: # Info => https://www.disctech.com/Seagate-ST500LT032-500GB-SATA-
- Hard Drive 1: Info => https://www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
- X.Org: # 21.1.11
+ Model:________________Dell Inspiron 14 7437
+ BIOS/UEFI:____________Dell A12
+ CPU:__________________Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
+ RAM:__________________2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
+ GPU:__________________Intel HD Graphics 4400
+ Display:______________14" 1920×1080
+ Hard Drive 0:_________Info => https://www.disctech.com/Seagate-ST500LT032-500GB-SATA-
+ Hard Drive 1:_________Info => https://www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
+ X.Org:________________21.1.11
The laptop had Windows 10 installed before I tried to put the new
install on it. I used the newest 1.1.07 version of Ventoy to put the
newest Mint .iso on an 16 GB Kingston Data Traveler 2.0 USB stick as
boot medium.
The install program seemingly didn't correctly detect any part of the
harddrive(s).
When I ran the install, it had somehow seemingly erased both sides of
the internal harddrive and therefore automatically selected the USB
stick as the harddrive instead, but didn't tell me that in the install
program.
The install program should probably tell people what the boot install
software wants to install on on the default option (= no custom
partition selected).
It then proceeded to try to install Linux Mint on the very same stick
the install software was stored upon. Or at least what I think what
happened. At least it gave me the error message you can see as the first
picture in the Reddit thread.
After that, nothing worked. The pc wouldn't boot into the Linux Mint OS
and I couldn't boot from the stick again. The stick was seemingly broken
or wiped as it wouldn't show as a hard drive anymore on my parallely
used Win11 test/control laptop.
After downloading another .iso of linux mint and Ventoy on my
test/control laptop, I found out that the stick was indeed not broken at
all, but that the ISO was just erased. After reconfiguring the USB stick
with Ventoy and the new .iso, I was able to boot linux mint from the
stick on the old laptop again.
This time I selected the custom ROM partition option to see what the
program was suggesting to install upon. This was when I realized that
the installation program tries to install linux mint on the very same
stick the iso is stored upon, because it can't really detect the
harddrive.
My best guess is that it's because the harddrive is such a weird piece
of hardware, but I really don't know.
I only have access to this laptop on the weekends so I can't post the
syslog and partman files here.
** Description changed:
See this Reddit thread for reference:
https://www.reddit.com/r/linuxmint/comments/1oyhl0o/critical_install_error_what_do/
...and this thread on the Linux Mint forum:
https://forums.linuxmint.com/viewtopic.php?p=2708861#p2708861
linux mint GitHub bug report I created before this: https://github.com/inuxmint/cinnamon/issues/13203
(I thought the GitHub for Linux Mint was the right place to post it. Apparently it wasn't as the Ubiquity installer has this separate hub)
The most noteworthy pieces of information have been added here:
https://forums.linuxmint.com/viewtopic.php?t=457750
I was told to report this here.
I tried to install Linux Mint on an old laptop.
This pc was released when SSDs started to become mainstream. It was sold
with a "hybrid" hard drive that has a 500GB HDD and a 32GB SSD section.
- Model:________________Dell Inspiron 14 7437
- BIOS/UEFI:____________Dell A12
- CPU:__________________Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
- RAM:__________________2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
- GPU:__________________Intel HD Graphics 4400
- Display:______________14" 1920×1080
- Hard Drive 0:_________Info => https://www.disctech.com/Seagate-ST500LT032-500GB-SATA-
- Hard Drive 1:_________Info => https://www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
- X.Org:________________21.1.11
+ Model:______________Dell Inspiron 14 7437
+ BIOS/UEFI:__________Dell A12
+ CPU:________________Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
+ RAM:________________2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
+ GPU:________________Intel HD Graphics 4400
+ Display:____________14" 1920×1080
+ Hard Drive 0:_______ATA ST500LT032-1E914 (scsi) => https://www.disctech.com/Seagate-ST500LT032-500GB-SATA-
+ Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi) => https://www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
+ X.Org:______________21.1.11
The laptop had Windows 10 installed before I tried to put the new
install on it. I used the newest 1.1.07 version of Ventoy to put the
newest Mint .iso on an 16 GB Kingston Data Traveler 2.0 USB stick as
boot medium.
The install program seemingly didn't correctly detect any part of the
harddrive(s).
When I ran the install, it had somehow seemingly erased both sides of
the internal harddrive and therefore automatically selected the USB
stick as the harddrive instead, but didn't tell me that in the install
program.
The install program should probably tell people what the boot install
software wants to install on on the default option (= no custom
partition selected).
It then proceeded to try to install Linux Mint on the very same stick
the install software was stored upon. Or at least what I think what
happened. At least it gave me the error message you can see as the first
picture in the Reddit thread.
After that, nothing worked. The pc wouldn't boot into the Linux Mint OS
and I couldn't boot from the stick again. The stick was seemingly broken
or wiped as it wouldn't show as a hard drive anymore on my parallely
used Win11 test/control laptop.
After downloading another .iso of linux mint and Ventoy on my
test/control laptop, I found out that the stick was indeed not broken at
all, but that the ISO was just erased. After reconfiguring the USB stick
with Ventoy and the new .iso, I was able to boot linux mint from the
stick on the old laptop again.
This time I selected the custom ROM partition option to see what the
program was suggesting to install upon. This was when I realized that
the installation program tries to install linux mint on the very same
stick the iso is stored upon, because it can't really detect the
harddrive.
My best guess is that it's because the harddrive is such a weird piece
of hardware, but I really don't know.
I only have access to this laptop on the weekends so I can't post the
syslog and partman files here.
** Description changed:
See this Reddit thread for reference:
https://www.reddit.com/r/linuxmint/comments/1oyhl0o/critical_install_error_what_do/
...and this thread on the Linux Mint forum:
https://forums.linuxmint.com/viewtopic.php?p=2708861#p2708861
linux mint GitHub bug report I created before this: https://github.com/inuxmint/cinnamon/issues/13203
(I thought the GitHub for Linux Mint was the right place to post it. Apparently it wasn't as the Ubiquity installer has this separate hub)
The most noteworthy pieces of information have been added here:
https://forums.linuxmint.com/viewtopic.php?t=457750
I was told to report this here.
I tried to install Linux Mint on an old laptop.
This pc was released when SSDs started to become mainstream. It was sold
with a "hybrid" hard drive that has a 500GB HDD and a 32GB SSD section.
Model:______________Dell Inspiron 14 7437
BIOS/UEFI:__________Dell A12
CPU:________________Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
RAM:________________2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
GPU:________________Intel HD Graphics 4400
Display:____________14" 1920×1080
- Hard Drive 0:_______ATA ST500LT032-1E914 (scsi) => https://www.disctech.com/Seagate-ST500LT032-500GB-SATA-
- Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi) => https://www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
+ Hard Drive 0:_______ATA ST500LT032-1E914 (scsi) => disctech.com/Seagate-ST500LT032-500GB-SATA-
+ Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi) => disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
X.Org:______________21.1.11
The laptop had Windows 10 installed before I tried to put the new
install on it. I used the newest 1.1.07 version of Ventoy to put the
newest Mint .iso on an 16 GB Kingston Data Traveler 2.0 USB stick as
boot medium.
The install program seemingly didn't correctly detect any part of the
harddrive(s).
When I ran the install, it had somehow seemingly erased both sides of
the internal harddrive and therefore automatically selected the USB
stick as the harddrive instead, but didn't tell me that in the install
program.
The install program should probably tell people what the boot install
software wants to install on on the default option (= no custom
partition selected).
It then proceeded to try to install Linux Mint on the very same stick
the install software was stored upon. Or at least what I think what
happened. At least it gave me the error message you can see as the first
picture in the Reddit thread.
After that, nothing worked. The pc wouldn't boot into the Linux Mint OS
and I couldn't boot from the stick again. The stick was seemingly broken
or wiped as it wouldn't show as a hard drive anymore on my parallely
used Win11 test/control laptop.
After downloading another .iso of linux mint and Ventoy on my
test/control laptop, I found out that the stick was indeed not broken at
all, but that the ISO was just erased. After reconfiguring the USB stick
with Ventoy and the new .iso, I was able to boot linux mint from the
stick on the old laptop again.
This time I selected the custom ROM partition option to see what the
program was suggesting to install upon. This was when I realized that
the installation program tries to install linux mint on the very same
stick the iso is stored upon, because it can't really detect the
harddrive.
My best guess is that it's because the harddrive is such a weird piece
of hardware, but I really don't know.
I only have access to this laptop on the weekends so I can't post the
syslog and partman files here.
** Description changed:
See this Reddit thread for reference:
https://www.reddit.com/r/linuxmint/comments/1oyhl0o/critical_install_error_what_do/
...and this thread on the Linux Mint forum:
https://forums.linuxmint.com/viewtopic.php?p=2708861#p2708861
linux mint GitHub bug report I created before this: https://github.com/inuxmint/cinnamon/issues/13203
(I thought the GitHub for Linux Mint was the right place to post it. Apparently it wasn't as the Ubiquity installer has this separate hub)
The most noteworthy pieces of information have been added here:
https://forums.linuxmint.com/viewtopic.php?t=457750
I was told to report this here.
I tried to install Linux Mint on an old laptop.
This pc was released when SSDs started to become mainstream. It was sold
with a "hybrid" hard drive that has a 500GB HDD and a 32GB SSD section.
Model:______________Dell Inspiron 14 7437
BIOS/UEFI:__________Dell A12
CPU:________________Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
RAM:________________2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
GPU:________________Intel HD Graphics 4400
Display:____________14" 1920×1080
- Hard Drive 0:_______ATA ST500LT032-1E914 (scsi) => disctech.com/Seagate-ST500LT032-500GB-SATA-
- Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi) => disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
+ Hard Drive 0:_______ATA ST500LT032-1E914 (scsi) => www.disctech.com/Seagate-ST500LT032-500GB-SATA-
+ Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi) => www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
X.Org:______________21.1.11
The laptop had Windows 10 installed before I tried to put the new
install on it. I used the newest 1.1.07 version of Ventoy to put the
newest Mint .iso on an 16 GB Kingston Data Traveler 2.0 USB stick as
boot medium.
The install program seemingly didn't correctly detect any part of the
harddrive(s).
When I ran the install, it had somehow seemingly erased both sides of
the internal harddrive and therefore automatically selected the USB
stick as the harddrive instead, but didn't tell me that in the install
program.
The install program should probably tell people what the boot install
software wants to install on on the default option (= no custom
partition selected).
It then proceeded to try to install Linux Mint on the very same stick
the install software was stored upon. Or at least what I think what
happened. At least it gave me the error message you can see as the first
picture in the Reddit thread.
After that, nothing worked. The pc wouldn't boot into the Linux Mint OS
and I couldn't boot from the stick again. The stick was seemingly broken
or wiped as it wouldn't show as a hard drive anymore on my parallely
used Win11 test/control laptop.
After downloading another .iso of linux mint and Ventoy on my
test/control laptop, I found out that the stick was indeed not broken at
all, but that the ISO was just erased. After reconfiguring the USB stick
with Ventoy and the new .iso, I was able to boot linux mint from the
stick on the old laptop again.
This time I selected the custom ROM partition option to see what the
program was suggesting to install upon. This was when I realized that
the installation program tries to install linux mint on the very same
stick the iso is stored upon, because it can't really detect the
harddrive.
My best guess is that it's because the harddrive is such a weird piece
of hardware, but I really don't know.
I only have access to this laptop on the weekends so I can't post the
syslog and partman files here.
** Description changed:
See this Reddit thread for reference:
https://www.reddit.com/r/linuxmint/comments/1oyhl0o/critical_install_error_what_do/
...and this thread on the Linux Mint forum:
https://forums.linuxmint.com/viewtopic.php?p=2708861#p2708861
linux mint GitHub bug report I created before this: https://github.com/inuxmint/cinnamon/issues/13203
(I thought the GitHub for Linux Mint was the right place to post it. Apparently it wasn't as the Ubiquity installer has this separate hub)
The most noteworthy pieces of information have been added here:
https://forums.linuxmint.com/viewtopic.php?t=457750
I was told to report this here.
I tried to install Linux Mint on an old laptop.
This pc was released when SSDs started to become mainstream. It was sold
with a "hybrid" hard drive that has a 500GB HDD and a 32GB SSD section.
Model:______________Dell Inspiron 14 7437
BIOS/UEFI:__________Dell A12
CPU:________________Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
RAM:________________2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
GPU:________________Intel HD Graphics 4400
Display:____________14" 1920×1080
- Hard Drive 0:_______ATA ST500LT032-1E914 (scsi) => www.disctech.com/Seagate-ST500LT032-500GB-SATA-
- Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi) => www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
+ Hard Drive 0:_______ATA ST500LT032-1E914 (scsi)
+ Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi)
X.Org:______________21.1.11
The laptop had Windows 10 installed before I tried to put the new
install on it. I used the newest 1.1.07 version of Ventoy to put the
newest Mint .iso on an 16 GB Kingston Data Traveler 2.0 USB stick as
boot medium.
The install program seemingly didn't correctly detect any part of the
harddrive(s).
When I ran the install, it had somehow seemingly erased both sides of
the internal harddrive and therefore automatically selected the USB
stick as the harddrive instead, but didn't tell me that in the install
program.
The install program should probably tell people what the boot install
software wants to install on on the default option (= no custom
partition selected).
It then proceeded to try to install Linux Mint on the very same stick
the install software was stored upon. Or at least what I think what
happened. At least it gave me the error message you can see as the first
picture in the Reddit thread.
After that, nothing worked. The pc wouldn't boot into the Linux Mint OS
and I couldn't boot from the stick again. The stick was seemingly broken
or wiped as it wouldn't show as a hard drive anymore on my parallely
used Win11 test/control laptop.
After downloading another .iso of linux mint and Ventoy on my
test/control laptop, I found out that the stick was indeed not broken at
all, but that the ISO was just erased. After reconfiguring the USB stick
with Ventoy and the new .iso, I was able to boot linux mint from the
stick on the old laptop again.
This time I selected the custom ROM partition option to see what the
program was suggesting to install upon. This was when I realized that
the installation program tries to install linux mint on the very same
stick the iso is stored upon, because it can't really detect the
harddrive.
My best guess is that it's because the harddrive is such a weird piece
of hardware, but I really don't know.
I only have access to this laptop on the weekends so I can't post the
syslog and partman files here.
+
+ Harddrive 0 info: www.disctech.com/Seagate-ST500LT032-500GB-SATA-
+ Harddrive 1 info: www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to ubiquity in Ubuntu.
https://bugs.launchpad.net/bugs/2131958
Title:
Installer doesn't seem to recogneize hybrid HDD + SSD harddrive -
installs on itself
Status in ubiquity package in Ubuntu:
New
Bug description:
See this Reddit thread for reference:
https://www.reddit.com/r/linuxmint/comments/1oyhl0o/critical_install_error_what_do/
...and this thread on the Linux Mint forum:
https://forums.linuxmint.com/viewtopic.php?p=2708861#p2708861
linux mint GitHub bug report I created before this: https://github.com/inuxmint/cinnamon/issues/13203
(I thought the GitHub for Linux Mint was the right place to post it. Apparently it wasn't as the Ubiquity installer has this separate hub)
The most noteworthy pieces of information have been added here:
https://forums.linuxmint.com/viewtopic.php?t=457750
I was told to report this here.
I tried to install Linux Mint on an old laptop. It was released when
SSDs started to become mainstream. It was sold with a weird "hybrid"
hard drive that has a 500GB HDD and a 32GB SSD section.
Model:______________Dell Inspiron 14 7437
BIOS/UEFI:__________Dell A12
CPU:________________Intel i7-4510U, 2 cores @ 2.0 to 3.1 GHz
RAM:________________2×4 GiB DDR3-1600 Hynix HMT851S6AMR6R-PB
GPU:________________Intel HD Graphics 4400
Display:____________14" 1920×1080
Hard Drive 0:_______ATA ST500LT032-1E914 (scsi)
Hard Drive 1:_______ATA LITEONIT LMS-32L (scsi)
X.Org:______________21.1.11
The laptop had Win10 installed before I tried to put the new install
on it. I used the newest 1.1.07 version of Ventoy to put the newest
Mint .iso on an 16GB Kingston Data Traveler 2.0 USB stick as boot
medium.
The install program seemingly didn't correctly automatically detect
any part of the internal harddrive(s).
When I ran the install, it had somehow seemingly erased both sides of
the internal harddrive and/or failed to detect them and/or therefore
automatically selected the USB stick as the harddrive for the
installation instead, but didn't notify and/or warn me of that that in
the install program.
The install program should tell people on which storage medium the
boot install software wants to install the software on, especially on
the default option (= no custom partition selected).
It then proceeded to try to install Linux Mint on the very same stick
the install software was stored upon. The program then displayed the
error message you can see as the first picture in the Reddit thread.
After that, nothing worked. The pc wouldn't boot into the Linux Mint
OS and I couldn't boot from the stick again. The stick was seemingly
broken or wiped as it wouldn't show as a hard drive anymore in the
hard drive overview on my parallely used Win11 test/control laptop. It
was detectable with the Windows device manager though.
After downloading another .iso of linux mint and Ventoy on my
test/control laptop, I realized that the stick was indeed not broken
at all, but that the ISO was just erased or corrupted. After
reconfiguring the USB stick with Ventoy and the new .iso, I was able
to boot linux mint from the stick on the old laptop again.
This time I selected the custom ROM partition option to see what the
program was suggesting to install upon. This was when I realized that
the installation program tries to install linux mint on the very same
stick the iso is stored upon, because it can't really detect the
harddrive.
My best guess is that it's because the harddrive is such a weird piece
of hardware, but I really don't know.
I only have access to this laptop on the weekends so I can't post the
syslog and partman files here.
Harddrive 0 info: www.disctech.com/Seagate-ST500LT032-500GB-SATA-
Harddrive 1 info: www.disctech.com/Lite-On-LMS-32L6M-717771-001-1.8-in-32GB-6gbps-MLC-mSATA-SSD
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/2131958/+subscriptions
More information about the foundations-bugs
mailing list