[Bug 480901] Re: gnome-ppp will not open the serial modem.
Luvo
stephen.loveland at defence.gov.au
Wed Apr 28 23:37:13 UTC 2010
OK. Created a USB startup disk with Lucid on it.
After booting into Lucid, I'm getting the same message from GNOME-PPP as I was with 9.10.
DMESG follows;
root at ubuntu:/home/ubuntu# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd at rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007fff0c00 (reserved)
[ 0.000000] BIOS-e820: 000000007fff0c00 - 000000007fffc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fffc000 - 0000000080000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007ffd0000 (usable)
[ 0.000000] modified: 000000007ffd0000 - 000000007fff0c00 (reserved)
[ 0.000000] modified: 000000007fff0c00 - 000000007fffc000 (ACPI NVS)
[ 0.000000] modified: 000000007fffc000 - 0000000080000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 7f6ed000 - 7ffbf5a0
[ 0.000000] Allocated new RAMDISK: 008de000 - 011b05a0
[ 0.000000] Move RAMDISK from 000000007f6ed000 - 000000007ffbf59f to 008de000 - 011b059f
[ 0.000000] ACPI: RSDP 000f6560 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 7fff0c84 0002C (v01 HP CPQ0860 14070520 CPQ 00000001)
[ 0.000000] ACPI: FACP 7fff0c00 00084 (v02 HP CPQ0860 00000002 CPQ 00000001)
[ 0.000000] ACPI: DSDT 7fff0cb0 04F8C (v01 HP nx7000 00010000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7fffbe80 00040
[ 0.000000] ACPI: SSDT 7fff5c3c 0028A (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E)
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd13c] BRK ==> [00008da000 - 00008dd13c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008de000 - 00011b05a0] NEW RAMDISK ==> [00008de000 - 00011b05a0]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ffd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffd0
[ 0.000000] On node 0 totalpages: 524139
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c11b2000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294594 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u4194304
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520043
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10484800 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffd0)
[ 0.000000] Memory: 2050876k/2096960k available (4673k kernel code, 44640k reserved, 2122k data, 656k init, 1187656k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1594.939 MHz processor.
[ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.87 BogoMIPS (lpj=6379756)
[ 0.008037] Security Framework initialized
[ 0.008081] AppArmor: AppArmor initialized
[ 0.008092] Mount-cache hash table entries: 512
[ 0.008282] Initializing cgroup subsys ns
[ 0.008290] Initializing cgroup subsys cpuacct
[ 0.008295] Initializing cgroup subsys memory
[ 0.008308] Initializing cgroup subsys devices
[ 0.008312] Initializing cgroup subsys freezer
[ 0.008315] Initializing cgroup subsys net_cls
[ 0.008348] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008352] CPU: L2 cache: 2048K
[ 0.008359] mce: CPU supports 5 MCE banks
[ 0.008383] Performance Events:
[ 0.008387] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.008389] no hardware sampling interrupt available.
[ 0.008392] p6 PMU driver.
[ 0.008400] ... version: 0
[ 0.008402] ... bit width: 32
[ 0.008404] ... generic registers: 2
[ 0.008407] ... value mask: 00000000ffffffff
[ 0.008410] ... max period: 000000007fffffff
[ 0.008412] ... fixed-purpose events: 0
[ 0.008415] ... event mask: 0000000000000003
[ 0.008422] Checking 'hlt' instruction... OK.
[ 0.025020] SMP alternatives: switching to UP code
[ 0.033439] Freeing SMP alternatives: 19k freed
[ 0.033452] ACPI: Core revision 20090903
[ 0.042941] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.044009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044020] ftrace: allocating 21771 entries in 43 pages
[ 0.048083] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.048089] weird, boot CPU (#0) not listed by the BIOS.
[ 0.048092] SMP motherboard not detected.
[ 0.048095] Local APIC not detected. Using dummy APIC emulation.
[ 0.048098] SMP disabled
[ 0.048258] Brought up 1 CPUs
[ 0.048261] Total of 1 processors activated (3189.87 BogoMIPS).
[ 0.052055] CPU0 attaching NULL sched-domain.
[ 0.052209] devtmpfs: initialized
[ 0.052644] regulator: core version 0.5
[ 0.052667] Time: 23:13:09 Date: 04/28/10
[ 0.052720] NET: Registered protocol family 16
[ 0.052861] EISA bus registered
[ 0.052871] ACPI: bus type pci registered
[ 0.054239] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
[ 0.054242] PCI: Using configuration type 1 for base access
[ 0.056140] bio: create slab <bio-0> at 0
[ 0.056946] ACPI: EC: Look up EC in DSDT
[ 0.065511] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.224033] ACPI: Interpreter enabled
[ 0.224049] ACPI: (supports S0 S3 S4 S5)
[ 0.224071] ACPI: Using PIC for interrupt routing
[ 0.304125] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.304303] ACPI: Power Resource [C18D] (on)
[ 0.304461] ACPI: Power Resource [C195] (on)
[ 0.304607] ACPI: Power Resource [C19C] (on)
[ 0.304648] ACPI: Power Resource [C1A6] (on)
[ 0.304824] ACPI: No dock devices found.
[ 0.310208] ACPI: PCI Root Bridge [C046] (0000:00)
[ 0.310256] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xb0000000-0xbfffffff]
[ 0.310373] pci 0000:00:1d.0: reg 20 io port: [0x48c0-0x48df]
[ 0.310427] pci 0000:00:1d.1: reg 20 io port: [0x48e0-0x48ff]
[ 0.310481] pci 0000:00:1d.2: reg 20 io port: [0x4c00-0x4c1f]
[ 0.310543] pci 0000:00:1d.7: reg 10 32bit mmio: [0xa0000000-0xa00003ff]
[ 0.310601] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.310607] pci 0000:00:1d.7: PME# disabled
[ 0.310698] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.310703] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
[ 0.310728] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.310736] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.310743] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.310751] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.310759] pci 0000:00:1f.1: reg 20 io port: [0x4c40-0x4c4f]
[ 0.310767] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.310819] pci 0000:00:1f.3: reg 20 io port: [0x4c20-0x4c3f]
[ 0.310864] pci 0000:00:1f.5: reg 10 io port: [0x4000-0x40ff]
[ 0.310871] pci 0000:00:1f.5: reg 14 io port: [0x4880-0x48bf]
[ 0.310879] pci 0000:00:1f.5: reg 18 32bit mmio: [0xa0200000-0xa02001ff]
[ 0.310886] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xa0300000-0xa03000ff]
[ 0.310917] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.310922] pci 0000:00:1f.5: PME# disabled
[ 0.310953] pci 0000:00:1f.6: reg 10 io port: [0x4400-0x44ff]
[ 0.310960] pci 0000:00:1f.6: reg 14 io port: [0x4800-0x487f]
[ 0.310998] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.311003] pci 0000:00:1f.6: PME# disabled
[ 0.311041] pci 0000:01:00.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff]
[ 0.311048] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.311054] pci 0000:01:00.0: reg 18 32bit mmio: [0x90400000-0x9040ffff]
[ 0.311071] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.311091] pci 0000:01:00.0: supports D1 D2
[ 0.311127] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.311131] pci 0000:00:01.0: bridge 32bit mmio: [0x90400000-0x904fffff]
[ 0.311136] pci 0000:00:01.0: bridge 32bit mmio pref: [0x98000000-0x9fffffff]
[ 0.311171] pci 0000:02:00.0: reg 10 32bit mmio: [0x90200000-0x902007ff]
[ 0.311179] pci 0000:02:00.0: reg 14 io port: [0x2400-0x247f]
[ 0.311220] pci 0000:02:00.0: supports D2
[ 0.311223] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.311227] pci 0000:02:00.0: PME# disabled
[ 0.311261] pci 0000:02:01.0: reg 10 io port: [0x2000-0x20ff]
[ 0.311269] pci 0000:02:01.0: reg 14 32bit mmio: [0x90300000-0x903000ff]
[ 0.311309] pci 0000:02:01.0: supports D1 D2
[ 0.311312] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.311316] pci 0000:02:01.0: PME# disabled
[ 0.311350] pci 0000:02:02.0: reg 10 32bit mmio: [0x90000000-0x90000fff]
[ 0.311395] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.311400] pci 0000:02:02.0: PME# disabled
[ 0.311434] pci 0000:02:04.0: reg 10 32bit mmio: [0x90100000-0x90100fff]
[ 0.311453] pci 0000:02:04.0: supports D1 D2
[ 0.311456] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.311461] pci 0000:02:04.0: PME# disabled
[ 0.311499] pci 0000:00:1e.0: transparent bridge
[ 0.311504] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.311510] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x903fffff]
[ 0.311539] pci_bus 0000:00: on NUMA node 0
[ 0.311545] ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
[ 0.311604] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
[ 0.311630] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT]
[ 0.323329] ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10)
[ 0.323534] ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10)
[ 0.323732] ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10)
[ 0.323930] ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10)
[ 0.324125] ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled.
[ 0.324324] ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11
[ 0.324511] ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled.
[ 0.324709] ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10)
[ 0.324878] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.324883] vgaarb: loaded
[ 0.325023] SCSI subsystem initialized
[ 0.325068] libata version 3.00 loaded.
[ 0.325145] usbcore: registered new interface driver usbfs
[ 0.325161] usbcore: registered new interface driver hub
[ 0.325191] usbcore: registered new device driver usb
[ 0.325341] ACPI: WMI: Mapper loaded
[ 0.325343] PCI: Using ACPI for IRQ routing
[ 0.325497] NetLabel: Initializing
[ 0.325499] NetLabel: domain hash size = 128
[ 0.325502] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.325519] NetLabel: unlabeled traffic allowed by default
[ 0.325551] Switching to clocksource tsc
[ 0.327921] AppArmor: AppArmor Filesystem Enabled
[ 0.327933] pnp: PnP ACPI init
[ 0.327949] ACPI: bus type pnp registered
[ 0.336895] pnp: PnP ACPI: found 15 devices
[ 0.336898] ACPI: ACPI bus type pnp unregistered
[ 0.336902] PnPBIOS: Disabled by ACPI PNP
[ 0.336913] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.336918] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.336922] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.336933] system 00:0c: ioport range 0x140-0x14f has been reserved
[ 0.336937] system 00:0c: ioport range 0x200-0x20f has been reserved
[ 0.336942] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.336946] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.336952] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 0.336956] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 0.336960] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 0.336964] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 0.336968] system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
[ 0.336975] system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
[ 0.371683] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.371687] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.371693] pci 0000:00:01.0: MEM window: 0x90400000-0x904fffff
[ 0.371697] pci 0000:00:01.0: PREFETCH window: 0x98000000-0x9fffffff
[ 0.371706] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[ 0.371709] pci 0000:02:04.0: IO window: 0x002800-0x0028ff
[ 0.371714] pci 0000:02:04.0: IO window: 0x002c00-0x002cff
[ 0.371719] pci 0000:02:04.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.371725] pci 0000:02:04.0: MEM window: 0x88000000-0x8bffffff
[ 0.371730] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.371734] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.371740] pci 0000:00:1e.0: MEM window: 0x90000000-0x903fffff
[ 0.371746] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.371764] pci 0000:00:1e.0: setting latency timer to 64
[ 0.372055] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5
[ 0.372058] PCI: setting IRQ 5 as level-triggered
[ 0.372064] pci 0000:02:04.0: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 0.372072] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.372076] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.372079] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.372083] pci_bus 0000:01: resource 1 mem: [0x90400000-0x904fffff]
[ 0.372086] pci_bus 0000:01: resource 2 pref mem [0x98000000-0x9fffffff]
[ 0.372090] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.372093] pci_bus 0000:02: resource 1 mem: [0x90000000-0x903fffff]
[ 0.372097] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.372100] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.372104] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.372107] pci_bus 0000:03: resource 0 io: [0x2800-0x28ff]
[ 0.372110] pci_bus 0000:03: resource 1 io: [0x2c00-0x2cff]
[ 0.372114] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.372117] pci_bus 0000:03: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.372152] NET: Registered protocol family 2
[ 0.372259] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.372630] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.373659] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.374384] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.374388] TCP reno registered
[ 0.374594] NET: Registered protocol family 1
[ 0.374695] pci 0000:01:00.0: Boot video device
[ 0.374930] cpufreq-nforce2: No nForce2 chipset.
[ 0.374974] Scanning for low memory corruption every 60 seconds
[ 0.375133] audit: initializing netlink socket (disabled)
[ 0.375158] type=2000 audit(1272496389.374:1): initialized
[ 0.388191] Trying to unpack rootfs image as initramfs...
[ 3.180232] highmem bounce pool size: 64 pages
[ 3.180240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.182171] VFS: Disk quotas dquot_6.5.2
[ 3.182241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.182994] fuse init (API version 7.13)
[ 3.183095] msgmni has been set to 1688
[ 3.183340] alg: No test for stdrng (krng)
[ 3.183406] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.183411] io scheduler noop registered
[ 3.183413] io scheduler anticipatory registered
[ 3.183416] io scheduler deadline registered
[ 3.183464] io scheduler cfq registered (default)
[ 3.183613] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.183641] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.183844] ACPI: AC Adapter [C134] (on-line)
[ 3.183932] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.183938] ACPI: Power Button [C1BE]
[ 3.183993] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.184083] ACPI: Lid Switch [C136]
[ 3.184139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.184142] ACPI: Power Button [PWRF]
[ 3.184473] Marking TSC unstable due to TSC halts in idle
[ 3.184516] processor LNXCPU:00: registered as cooling_device0
[ 3.189393] Switching to clocksource acpi_pm
[ 3.189429] isapnp: Scanning for PnP cards...
[ 3.195181] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.195277] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.195403] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 3.195665] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.196288] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
[ 3.196293] PCI: setting IRQ 10 as level-triggered
[ 3.196299] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 3.196307] serial 0000:00:1f.6: PCI INT B disabled
[ 3.197483] brd: module loaded
[ 3.198052] loop: module loaded
[ 3.198147] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 3.198249] ata_piix 0000:00:1f.1: version 2.13
[ 3.198260] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 3.198267] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 3.198316] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.198396] scsi0 : ata_piix
[ 3.242045] scsi1 : ata_piix
[ 3.242850] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c40 irq 14
[ 3.242854] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4c48 irq 15
[ 3.243303] Fixed MDIO Bus: probed
[ 3.243350] PPP generic driver version 2.4.2
[ 3.243399] tun: Universal TUN/TAP device driver, 1.6
[ 3.243402] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 3.243494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.243794] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5
[ 3.243799] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 5 (level, low) -> IRQ 5
[ 3.243817] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.243822] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.243864] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.243899] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.247788] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.248059] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000
[ 3.295528] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.295647] usb usb1: configuration #1 chosen from 1 choice
[ 3.295684] hub 1-0:1.0: USB hub found
[ 3.295699] hub 1-0:1.0: 6 ports detected
[ 3.295771] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.295788] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.296120] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[ 3.296125] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 3.296132] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.296136] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.296173] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.296197] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0
[ 3.296299] usb usb2: configuration #1 chosen from 1 choice
[ 3.296331] hub 2-0:1.0: USB hub found
[ 3.296340] hub 2-0:1.0: 2 ports detected
[ 3.296668] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5
[ 3.296673] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 3.296680] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.296684] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.296720] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.296742] uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0
[ 3.296842] usb usb3: configuration #1 chosen from 1 choice
[ 3.296881] hub 3-0:1.0: USB hub found
[ 3.296889] hub 3-0:1.0: 2 ports detected
[ 3.296944] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 3.296951] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.296955] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.296992] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.297014] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00
[ 3.297118] usb usb4: configuration #1 chosen from 1 choice
[ 3.297149] hub 4-0:1.0: USB hub found
[ 3.297157] hub 4-0:1.0: 2 ports detected
[ 3.297277] PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12
[ 3.306139] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.312859] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.312872] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.312904] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.312930] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.312960] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.313085] mice: PS/2 mouse device common for all mice
[ 3.313406] rtc_cmos 00:09: RTC can wake from S4
[ 3.313451] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 3.313469] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 3.313600] device-mapper: uevent: version 1.0.3
[ 3.313711] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 3.313769] device-mapper: multipath: version 1.1.0 loaded
[ 3.313773] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.313916] EISA: Probing bus 0 at eisa.0
[ 3.313923] Cannot allocate resource for EISA slot 1
[ 3.313926] Cannot allocate resource for EISA slot 2
[ 3.313929] Cannot allocate resource for EISA slot 3
[ 3.313931] Cannot allocate resource for EISA slot 4
[ 3.313949] EISA: Detected 0 cards.
[ 3.314043] cpuidle: using governor ladder
[ 3.314117] cpuidle: using governor menu
[ 3.314627] TCP cubic registered
[ 3.314824] NET: Registered protocol family 10
[ 3.315359] lo: Disabled Privacy Extensions
[ 3.315727] NET: Registered protocol family 17
[ 3.315952] Using IPI No-Shortcut mode
[ 3.316062] PM: Resume from disk failed.
[ 3.316075] registered taskstats version 1
[ 3.316315] Magic number: 6:700:252
[ 3.316350] uhci_hcd 0000:00:1d.0: hash matches
[ 3.316412] rtc_cmos 00:09: setting system clock to 2010-04-28 23:13:13 UTC (1272496393)
[ 3.316417] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.316419] EDD information not available.
[ 3.491383] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[ 3.491388] ata1.00: 312581808 sectors, multi 16: LBA48
[ 3.492068] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4080N, 0C09, max MWDMA2
[ 3.579792] isapnp: No Plug & Play device found
[ 3.579831] ata1.00: configured for UDMA/100
[ 3.579910] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.580412] ata2.00: configured for MWDMA2
[ 3.580543] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
[ 3.580691] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.581268] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.581326] sd 0:0:0:0: [sda] Write Protect is off
[ 3.581329] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.581358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.581511] sda:
[ 3.588454] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4080N 0C09 PQ: 0 ANSI: 5
[ 3.600314] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.600322] Uniform CD-ROM driver Revision: 3.20
[ 3.600501] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.600592] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.644132] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.679471] Freeing initrd memory: 9033k freed
[ 3.778535] usb 1-1: configuration #1 chosen from 1 choice
[ 3.888049] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 3.888325] ACPI: Battery Slot [C11F] (battery present)
[ 4.020796] usb 1-3: configuration #1 chosen from 1 choice
[ 4.020883] hub 1-3:1.0: USB hub found
[ 4.020978] hub 1-3:1.0: 4 ports detected
[ 4.245483] sda1 sda2 < sda5 > sda3
[ 4.276034] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.276056] Freeing unused kernel memory: 656k freed
[ 4.276774] Write protecting the kernel text: 4676k
[ 4.276854] Write protecting the kernel read-only data: 1840k
[ 4.292197] usb 1-3.1: new low speed USB device using ehci_hcd and address 4
[ 4.300359] udev: starting version 151
[ 4.389816] usb 1-3.1: configuration #1 chosen from 1 choice
[ 4.580819] Linux agpgart interface v0.103
[ 4.585977] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.586029] 8139cp 0000:02:01.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 4.596363] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 4.610979] eth0: RTL-8139C+ at 0xf8086000, 00:0f:b0:04:d5:9c, IRQ 10
[ 4.628314] Initializing USB Mass Storage driver...
[ 4.628606] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.628985] usbcore: registered new interface driver usb-storage
[ 4.628990] USB Mass Storage support registered.
[ 4.629245] usb-storage: device found at 2
[ 4.629248] usb-storage: waiting for device to settle before scanning
[ 4.629847] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 4.683031] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5
[ 4.683147] [drm] Initialized drm 1.1.0 20060810
[ 4.683155] ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no)
[ 4.688393] 8139too Fast Ethernet driver 0.9.28
[ 4.695061] ohci1394 0000:02:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 4.704850] usbcore: registered new interface driver hiddev
[ 4.722777] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input6
[ 4.722904] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.1/input0
[ 4.722937] usbcore: registered new interface driver usbhid
[ 4.722941] usbhid: v2.6:USB HID core driver
[ 4.768716] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[90200000-902007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.775657] [drm] radeon defaulting to kernel modesetting.
[ 4.775661] [drm] radeon kernel modesetting enabled.
[ 4.775725] radeon 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 4.779207] [drm] radeon: Initializing kernel modesetting.
[ 4.779314] [drm] register mmio base: 0x90400000
[ 4.779316] [drm] register mmio size: 65536
[ 4.779971] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 4.780066] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 4.780086] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 4.780124] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 4.780150] [drm] radeon: VRAM 64M
[ 4.780152] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[ 4.780155] [drm] radeon: GTT 256M
[ 4.780157] [drm] radeon: GTT from 0xB0000000 to 0xBFFFFFFF
[ 4.780185] [drm] radeon: irq initialized.
[ 4.781351] [drm] Detected VRAM RAM=64M, BAR=128M
[ 4.781356] [drm] RAM width 128bits DDR
[ 4.781469] [TTM] Zone kernel: Available graphics memory: 436984 kiB.
[ 4.781472] [TTM] Zone highmem: Available graphics memory: 1030812 kiB.
[ 4.781494] [drm] radeon: 64M of VRAM memory ready
[ 4.781496] [drm] radeon: 256M of GTT memory ready.
[ 4.781743] [drm] radeon: cp idle (0x02000603)
[ 4.781790] [drm] Loading R200 Microcode
[ 4.782083] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[ 4.787652] [drm] radeon: ring at 0x00000000B0000000
[ 4.787674] [drm] ring test succeeded in 1 usecs
[ 4.790552] [drm] radeon: ib pool ready.
[ 4.790634] [drm] ib test succeeded in 0 usecs
[ 4.791291] [drm] Panel ID String: HTC
[ 4.791294] [drm] Panel Size 1280x800
[ 4.791511] [drm] Default TV standard: NTSC
[ 4.791514] [drm] 27.000000000 MHz TV ref clk
[ 4.791516] [drm] No TV DAC info found in BIOS
[ 4.791520] [drm] Default TV standard: NTSC
[ 4.791522] [drm] 27.000000000 MHz TV ref clk
[ 4.791589] [drm] Radeon Display Connectors
[ 4.791591] [drm] Connector 0:
[ 4.791593] [drm] VGA
[ 4.791597] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 4.791599] [drm] Encoders:
[ 4.791601] [drm] CRT1: INTERNAL_DAC1
[ 4.791604] [drm] Connector 1:
[ 4.791605] [drm] LVDS
[ 4.791608] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 4.791611] [drm] Encoders:
[ 4.791613] [drm] LCD1: INTERNAL_LVDS
[ 4.791615] [drm] Connector 2:
[ 4.791617] [drm] S-video
[ 4.791618] [drm] Encoders:
[ 4.791621] [drm] TV1: INTERNAL_DAC2
[ 4.840237] [drm] fb mappable at 0x98040000
[ 4.840240] [drm] vram apper at 0x98000000
[ 4.840242] [drm] size 4096000
[ 4.840244] [drm] fb depth is 24
[ 4.840246] [drm] pitch is 5120
[ 4.841810] fb0: radeondrmfb frame buffer device
[ 4.841813] registered panic notifier
[ 4.841923] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 4.845625] vga16fb: initializing
[ 4.845630] vga16fb: mapped to 0xc00a0000
[ 4.845633] vga16fb: not registering due to another framebuffer present
[ 4.903140] Console: switching to colour frame buffer device 160x50
[ 5.309348] xor: automatically using best checksumming function: pIII_sse
[ 5.328021] pIII_sse : 4130.000 MB/sec
[ 5.328025] xor: using function: pIII_sse (4130.000 MB/sec)
[ 5.348524] device-mapper: dm-raid45: initialized v0.2594b
[ 5.507727] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.577937] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 5.577942] EXT4-fs (sda3): write access will be enabled during recovery
[ 5.630823] EXT4-fs (sda3): recovery complete
[ 5.631191] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 6.044171] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f474a40290d]
[ 9.628323] usb-storage: device scan complete
[ 9.628954] scsi 2:0:0:0: Direct-Access SD/MMC Card Reader 1.00 PQ: 0 ANSI: 0
[ 9.630037] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.946644] sd 2:0:0:0: [sdb] 1989632 512-byte logical blocks: (1.01 GB/971 MiB)
[ 9.948639] sd 2:0:0:0: [sdb] Write Protect is off
[ 9.948643] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 9.948647] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.955747] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.955754] sdb: sdb1
[ 9.964505] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 9.964511] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 10.845092] aufs 2-standalone.tree-20091207
[ 10.866347] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 16.064467] kjournald starting. Commit interval 5 seconds
[ 16.064507] EXT3 FS on loop1, internal journal
[ 16.064515] ext3_orphan_cleanup: deleting unreferenced inode 16
[ 16.064852] ext3_orphan_cleanup: deleting unreferenced inode 15
[ 16.064889] ext3_orphan_cleanup: deleting unreferenced inode 14
[ 16.064898] EXT3-fs: loop1: 3 orphan inodes deleted
[ 16.064900] EXT3-fs: recovery complete.
[ 16.065043] EXT3-fs: mounted filesystem with ordered data mode.
[ 77.583980] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 77.981132] udev: starting version 151
[ 78.630826] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 78.925043] intel_rng: FWH not detected
[ 79.175875] lib80211: common routines for IEEE802.11 drivers
[ 79.175881] lib80211_crypt: registered algorithm 'NULL'
[ 79.264980] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 79.264985] wbsd: Copyright(c) Pierre Ossman
[ 79.265840] wbsd 00:02: activated
[ 79.272451] mmc0: W83L51xD id 7112 at 0x248 irq 6 dma 0 PnP
[ 79.711660] mmc0: new SD card at address 356d
[ 79.758632] irda_init()
[ 79.758653] NET: Registered protocol family 23
[ 79.778899] parport_pc 00:05: reported by Plug and Play ACPI
[ 79.778954] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 79.804729] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 79.804734] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[ 79.810002] isa bounce pool size: 16 pages
[ 79.810403] mmcblk0: mmc0:356d SD256 243 MiB
[ 79.810491] mmcblk0: p1
[ 79.887706] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860]
[ 79.887729] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 79.887733] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 79.887739] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44
[ 79.919644] ppdev: user-space parallel port driver
[ 79.957080] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device.
[ 79.957085] Setting up Intel 82801 controller and SMSC device
[ 79.957105] Detected Chip id: 0x5a, setting up registers...
[ 79.957245] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[ 79.957262] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e
[ 79.957680] SMsC IrDA Controller found
[ 79.957682] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 79.957742] smsc_ircc_set_sir_speed(), Setting speed to: 9600
[ 79.957755] No transceiver found. Defaulting to Fast pin select
[ 79.961334] IrDA: Registered device irda0
[ 80.116372] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5
[ 80.116378] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 80.116383] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 80.116395] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 80.116400] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 80.116656] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff
[ 80.116660] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 80.130236] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 80.130242] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 80.130343] ipw2200 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 80.140407] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 80.140469] ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw
[ 80.186475] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[ 80.237456] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 80.704360] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 80.706057] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 80.706806] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 80.707463] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 80.722458] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 80.772989] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 81.350954] eth0: link down
[ 81.351219] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 81.448636] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 81.448678] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 81.688072] ttyS0: LSR safety check engaged!
[ 81.688139] ttyS0: LSR safety check engaged!
[ 81.690753] ttyS0: LSR safety check engaged!
[ 81.691526] ttyS2: LSR safety check engaged!
[ 81.691578] ttyS2: LSR safety check engaged!
[ 81.692634] ttyS2: LSR safety check engaged!
[ 82.372383] intel8x0_measure_ac97_clock: measured 55662 usecs (2682 samples)
[ 82.372389] intel8x0: clocking to 48000
[ 84.674836] lp0: using parport0 (interrupt-driven).
[ 92.316032] eth1: no IPv6 routers present
[ 180.833485] ttyS2: LSR safety check engaged!
[ 180.897719] ttyS0: LSR safety check engaged!
root at ubuntu:/home/ubuntu#
--
gnome-ppp will not open the serial modem.
https://bugs.launchpad.net/bugs/480901
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list