Fwd: [Bug 1367851] Re: BL460Gen9 gets IP Address only on NIC port2 with Ubuntu 14.04/14.04.1

[Brad Figg]

This is a request to apply upstream commit dad91ee478c7f39e04a33272732147b8c274bb58
to trusty.

Buglink: http://bugs.launchpad.net/bugs/1370716


Brad

On 09/17/2014 01:44 PM, Narinder Gupta wrote:
> Hi All,
> There is a issue reported by HP where NIC1 of gen9 blade can not be enabled if broadcom controller is used. After consultation with broadcom it was found that patch
> http://patchwork.ozlabs.org/patch/358990/ fixes the issue. As i can observe that this patch is there in 3.16 stable kernel upstream
> https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/tree/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c?id=refs/tags/v3.16.3
> 
> This requested is to backport this patch to trusty SRU kenrel as this is blocking issue for  BL460c Gen9 certification in 1P mode.
> 
> Being criticality of the feature can we take this in Oct SRU cycle starting next week?
> 
> Thanks and Regards,
> Narinder Gupta (PMP)                   narinder.gupta at canonical.com <mailto:narinder.gupta at canonical.com>
> Canonical, Ltd.                    narindergupta [irc.freenode.net <http://irc.freenode.net>]
> +1.281.736.5150                            narindergupta2007[skype]
> 
> Ubuntu- Linux for human beings | www.ubuntu.com <http://www.ubuntu.com> | www.canonical.com <http://www.canonical.com>
> 
> 
> ---------- Forwarded message ----------
> From: *Kodamati Pradeep Vinesh Reddy* <pradeep.reddy2 at hp.com <mailto:pradeep.reddy2 at hp.com>>
> Date: Wed, Sep 17, 2014 at 3:20 PM
> Subject: [Bug 1367851] Re: BL460Gen9 gets IP Address only on NIC port2 with Ubuntu 14.04/14.04.1
> To: narinder.gupta at canonical.com <mailto:narinder.gupta at canonical.com>
> 
> 
> Narinder,
> 
> Below is the patch that Qlogic has provided, that fixes the issue.
> 
> http://patchwork.ozlabs.org/patch/358990/
> 
> Can you include this patch in the next SRU?
> 
> Thanks,
> Pradeep.
> 
> --
> You received this bug notification because you are a bug assignee.
> https://bugs.launchpad.net/bugs/1367851
> 
> Title:
>   BL460Gen9 gets IP Address only on NIC port2 with Ubuntu 14.04/14.04.1
> 
> Status in HP Ubuntu collaboration.:
>   New
> 
> Bug description:
>   BL460Gen9  does not get IP addresses on both the NIC ports with Ubuntu
>   14.04/14.04.1
> 
>   The NIC card in the blade is "Broadcom Corporation BCM57840 NetXtreme
>   II 10/20-Gigabit Ethernet".
> 
>   The NIC port 1 does not get an IP address both during install and
>   after install.
> 
>   I have attached the dmesg and lspci logs captured from the installer.
> 
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/hp/+bug/1367851/+subscriptions
> 
> 
> 


-- 
Brad Figg brad.figg at canonical.com http://www.canonical.com