[USB] Monter une clé USB

[adeimantos at free.fr]

Selon Christophe Lucas <clucas at rotomalug.org>:

> adeimantos at free.fr (adeimantos at free.fr) wrote:
> >
> >
> > Cher Amis : il y a du nouveau !
> > Après avoir fait les opérations suivantes
> > 1)  mknod /dev/sda1 b 8 1
> > 2) mkdir /media/clusb
> > 3) Dans /etc/fstab, ajouté la ligne :
> > /dev/sda1 /media/clusb   vfat    rw,user,noauto  0   0
> >
> > 4) Passé la commande suivante :
> > modprobe usb-storage
> >
> > 5) réinstallé les paquets 'acpi' ...
> >
> > 5) relancé le système ...
> >
> > Lorsque je branche ma clé USB, la petite lumière verte clignote et j'ai
> bien
> > dans 'Poste de travail' l'icône 'clusb'. Lorsque je clique sur cette icône,
> le
> > système renvoie une boîte de dialogue qui dit :
> > mount: special device /dev/sda1 does not exist
> >
> > Je suppose que la commande 1) n'est pas la bonne...Quand pensez-vous ?
> > JP
>
> Que donne 'dmesg' à ce moment ci.
>
> 	~Christophe
>
>


ÇA donne ceci :
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: irq 5, io base 0000e400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 12 (level, low) -> IRQ 12
eth0: RealTek RTL8139 at 0xe800, 00:80:ad:7a:9a:a7, IRQ 12
eth0:  Identified 8139 chip type 'RTL-8100'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:14.0: Lucent Microelectronics USS-344S USB Controller
ohci_hcd 0000:00:14.0: irq 5, pci mem d4a2d000
ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:14.1: Lucent Microelectronics USS-344S USB Controller (#2)
ohci_hcd 0000:00:14.1: irq 5, pci mem d4a49000
ohci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ACPI: PCI interrupt 0000:00:14.2[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:14.2: Lucent Microelectronics USS-344S USB Controller (#3)
ohci_hcd 0000:00:14.2: irq 5, pci mem d4a52000
ohci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ACPI: PCI interrupt 0000:00:14.3[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:14.3: Lucent Microelectronics USS-344S USB Controller (#4)
ohci_hcd 0000:00:14.3: irq 5, pci mem d4a66000
ohci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
Intel ISA PCIC probe: not found.
Device 'i823650' does not have a release() function, it is broken and must be
fixed.
Badness in device_release at drivers/base/core.c:85
 [<c018bbd8>] kobject_cleanup+0x40/0x65
 [<d4839e11>] init_i82365+0x6f/0x179 [i82365]
 [<c012afd2>] sys_init_module+0xe3/0x1d4
 [<c0105f9b>] syscall_call+0x7/0xb
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02c95c0(lo)
IPv6 over IPv4 tunneling driver
usb 2-1: new full speed USB device using address 2
usb 2-1: control timeout on ep0out
ohci_hcd 0000:00:14.0: Unlink after no-IRQ?  Different ACPI or APIC settings may
help.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.